This is a way to make the link persistent, in rpt.conf, set the following: rpt.conf:970=ilink,13 ; Permanently connect specified link -- transceive Then put in a start up macro in rpt.conf and you are set. You do not have to use 970, tht is the sysop choice. Keith VA3YC On 1/21/14 3:12 PM, "buck" <buck@thebghouse.org> wrote:
Hi,
We have 2 nodes connected over a microwave link. The link is very stable but occasionally the nodes disconnect due to network instability.
Can I change the retry counts or failure times between nodes?
Has someone written a script that run under cron to check and re-connect nodes that drop?
Thanks, Birton, N6UG
Nodes: 27035 27283 28138 .
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
