Hi, We have 2 nodes connected over a microwave link. The link is very stable but occasionally the nodes disconnect due to network instability. Can I change the retry counts or failure times between nodes? Has someone written a script that run under cron to check and re-connect nodes that drop? Thanks, Birton, N6UG Nodes: 27035 27283 28138 ..
This is a way to make the link persistent, in rpt.conf, set the following: rpt.conf:970=ilink,13 ; Permanently connect specified link -- transceive Then put in a start up macro in rpt.conf and you are set. You do not have to use 970, tht is the sysop choice. Keith VA3YC On 1/21/14 3:12 PM, "buck" <buck@thebghouse.org> wrote:
Hi,
We have 2 nodes connected over a microwave link. The link is very stable but occasionally the nodes disconnect due to network instability.
Can I change the retry counts or failure times between nodes?
Has someone written a script that run under cron to check and re-connect nodes that drop?
Thanks, Birton, N6UG
Nodes: 27035 27283 28138 .
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
Have you considered using ilink,13 ? This will make a permanent link to another node. For example, this is what I have in my rpt.conf. Just dial *953 <nodenumber> 953=ilink,13 ; Permanent link transceive Also, here is a link to allstar commands http://kd3su.us/allStar/commands.html On Tue, Jan 21, 2014 at 2:12 PM, buck <buck@thebghouse.org> wrote:
Hi,
We have 2 nodes connected over a microwave link. The link is very stable but occasionally the nodes disconnect due to network instability.
Can I change the retry counts or failure times between nodes?
Has someone written a script that run under cron to check and re-connect nodes that drop?
Thanks,
Birton, N6UG
Nodes:
27035
27283
28138
….
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
buck -
Keith Goobie -
Michael Hebert