Re: [App_rpt-users] no audio from URI
good morning, i connect a headphone to the URI so we don`t need to search the problem on the Motorolas.... 73... ________________________________ Von: David Morley [ab8tn1@cox.net] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com Betreff: Re: [App_rpt-users] no audio from URI Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors Sent from my iPhone On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: Hi all, i think i have a little blackout :( I would like to set up a repeater with 2 GM360 <!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok <!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok <!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console) <!--[if !supportLists]-->- <!--[endif]-->PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 :( On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing). Thanks, Bob kk6ecm Sent from iPad On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
good morning, i connect a headphone to the URI so we don`t need to search the problem on the Motorolas....
73...
Von: David Morley [ab8tn1@cox.net] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com Betreff: Re: [App_rpt-users] no audio from URI
Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors
Sent from my iPhone
On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
Hi all, i think i have a little blackout L I would like to set up a repeater with 2 GM360 <!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok <!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok <!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console) <!--[if !supportLists]-->- <!--[endif]-->PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 L On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
i take this box http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/d... 73 de tom dh6mbt ________________________________ Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von kk6ecm [kk6ecm@gmail.com] Gesendet: Dienstag, 3. Juni 2014 12:59 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing). Thanks, Bob kk6ecm Sent from iPad On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: good morning, i connect a headphone to the URI so we don`t need to search the problem on the Motorolas.... 73... ________________________________ Von: David Morley [ab8tn1@cox.net<mailto:ab8tn1@cox.net>] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com<mailto:torben@klimt-online.com> Betreff: Re: [App_rpt-users] no audio from URI Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors Sent from my iPhone On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: Hi all, i think i have a little blackout :( I would like to set up a repeater with 2 GM360 <!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok <!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok <!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console) <!--[if !supportLists]-->- <!--[endif]-->PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 :( On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Again, I'm not sure if it is your issue, but the chipset used in your board is of the same family as the one I seemed to have difficulty. When I chose a board with an older generation chipset (NM10, and not the 7x series), the audio worked good. Thanks, Bob kk6ecm Sent from iPad On Jun 3, 2014, at 4:19 AM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
i take this box
http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/d...
73 de tom dh6mbt Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von kk6ecm [kk6ecm@gmail.com] Gesendet: Dienstag, 3. Juni 2014 12:59 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI
I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing).
Thanks, Bob kk6ecm
Sent from iPad
On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
good morning, i connect a headphone to the URI so we don`t need to search the problem on the Motorolas....
73...
Von: David Morley [ab8tn1@cox.net] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com Betreff: Re: [App_rpt-users] no audio from URI
Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors
Sent from my iPhone
On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
Hi all, i think i have a little blackout L I would like to set up a repeater with 2 GM360 <!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok <!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok <!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console) <!--[if !supportLists]-->- <!--[endif]-->PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 L On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Now i tried 3 different computers with 2 URI-Boards and 3 installs - SQL detect by DSP -> ok - DTMF reading -> ok - Transmitting by PTT -> ok - Sending audio -> NO I have headphones connectet direct to the URI on Pins 13 (GND) and 22/23 -> no nothing ☹ ☹ Von: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 14:11 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI Again, I'm not sure if it is your issue, but the chipset used in your board is of the same family as the one I seemed to have difficulty. When I chose a board with an older generation chipset (NM10, and not the 7x series), the audio worked good. Thanks, Bob kk6ecm Sent from iPad On Jun 3, 2014, at 4:19 AM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: i take this box http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/d... 73 de tom dh6mbt ________________________________ Von: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org>] im Auftrag von kk6ecm [kk6ecm@gmail.com<mailto:kk6ecm@gmail.com>] Gesendet: Dienstag, 3. Juni 2014 12:59 An: App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> Betreff: Re: [App_rpt-users] no audio from URI I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing). Thanks, Bob kk6ecm Sent from iPad On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: good morning, i connect a headphone to the URI so we don`t need to search the problem on the Motorolas.... 73... ________________________________ Von: David Morley [ab8tn1@cox.net<mailto:ab8tn1@cox.net>] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com<mailto:torben@klimt-online.com> Betreff: Re: [App_rpt-users] no audio from URI Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors Sent from my iPhone On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: Hi all, i think i have a little blackout ☹ I would like to set up a repeater with 2 GM360 <!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok <!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok <!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console) <!--[if !supportLists]-->- <!--[endif]-->PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 ☹ On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
So if you do something like 'radio tune txvoice 500', you hear nothing in the headphones? Out of curiosity, try connecting the headphones to the onboard audio in the computer (assuming it has such) and repeat the test.... When I first started playing with ACID in a VirtualBox VM, I seemed to have no audio out. I then disabled VBox audio for the VM, and it started working. I didn't spend any more time analysing it, so it may have started working for some other reason. I've since installed on a "real" computer, and disabled the onboard audio via BIOS setup there, and everything is working FB there. 73, ~iain / N6ML On Tue, Jun 3, 2014 at 11:51 AM, torben@klimt-online.com <torben@klimt-online.com> wrote:
Now i tried 3 different computers with 2 URI-Boards and 3 installs
- SQL detect by DSP -> ok
- DTMF reading -> ok
- Transmitting by PTT -> ok
- Sending audio -> NO
I have headphones connectet direct to the URI on Pins 13 (GND) and 22/23 -> no nothing L L
Von: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 14:11 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI
Again, I'm not sure if it is your issue, but the chipset used in your board is of the same family as the one I seemed to have difficulty. When I chose a board with an older generation chipset (NM10, and not the 7x series), the audio worked good.
Thanks,
Bob
kk6ecm
Sent from iPad
On Jun 3, 2014, at 4:19 AM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
i take this box
http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/d...
73 de tom dh6mbt
________________________________
Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von kk6ecm [kk6ecm@gmail.com] Gesendet: Dienstag, 3. Juni 2014 12:59 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI
I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing).
Thanks,
Bob
kk6ecm
Sent from iPad
On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
good morning,
i connect a headphone to the URI so we don`t need to search the problem on the Motorolas....
73...
________________________________
Von: David Morley [ab8tn1@cox.net] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com Betreff: Re: [App_rpt-users] no audio from URI
Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors
Sent from my iPhone
On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
Hi all,
i think i have a little blackout L
I would like to set up a repeater with 2 GM360
<!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok
<!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok
<!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console)
<!--[if !supportLists]-->- <!--[endif]-->PTT is ok
BUT there is no audio out from the URI on Port 22 and or 23 L
On a windows machine the URI works fine but on the asterisk there is no output
Any ideas ?
greetings
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Try amplifying the output of the URI in order to drive the speaker. If that does not work, I'd test the URI using a loopback connector and uridiag down loaded from http://www.dmkeng.com/images/URI-FAQs.pdf Make sure Asterisk is stopped when uridiag is used. Service asterisk stop on the Linux command line. This is not a test to determine URI health, but the ability of the ACID build on your computer, and the ability to send audio to the URI. Thanks, Bob kk6ecm Sent from iPad On Jun 3, 2014, at 2:51 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
Now i tried 3 different computers with 2 URI-Boards and 3 installs
- SQL detect by DSP -> ok - DTMF reading -> ok - Transmitting by PTT -> ok - Sending audio -> NO
I have headphones connectet direct to the URI on Pins 13 (GND) and 22/23 -> no nothing L L
Von: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 14:11 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI
Again, I'm not sure if it is your issue, but the chipset used in your board is of the same family as the one I seemed to have difficulty. When I chose a board with an older generation chipset (NM10, and not the 7x series), the audio worked good.
Thanks, Bob kk6ecm
Sent from iPad
On Jun 3, 2014, at 4:19 AM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
i take this box
http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/d...
73 de tom dh6mbt Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von kk6ecm [kk6ecm@gmail.com] Gesendet: Dienstag, 3. Juni 2014 12:59 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI
I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing).
Thanks, Bob kk6ecm
Sent from iPad
On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
good morning, i connect a headphone to the URI so we don`t need to search the problem on the Motorolas....
73...
Von: David Morley [ab8tn1@cox.net] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com Betreff: Re: [App_rpt-users] no audio from URI
Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors
Sent from my iPhone
On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
Hi all, i think i have a little blackout L I would like to set up a repeater with 2 GM360 <!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok <!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok <!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console) <!--[if !supportLists]-->- <!--[endif]-->PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 L On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
IT WORKS NOW I tried the next pc (an older one) and it works fine without any config changes. It`s short before midnight and I must go to work tomorrow ☹ I will look the next days which CPUs and Chipsets I tried and doesn`t work and which one work now ok ? Good n8 tom dh6mbt Von: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 23:13 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI Try amplifying the output of the URI in order to drive the speaker. If that does not work, I'd test the URI using a loopback connector and uridiag down loaded from http://www.dmkeng.com/images/URI-FAQs.pdf Make sure Asterisk is stopped when uridiag is used. Service asterisk stop on the Linux command line. This is not a test to determine URI health, but the ability of the ACID build on your computer, and the ability to send audio to the URI. Thanks, Bob kk6ecm Sent from iPad On Jun 3, 2014, at 2:51 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: Now i tried 3 different computers with 2 URI-Boards and 3 installs - SQL detect by DSP -> ok - DTMF reading -> ok - Transmitting by PTT -> ok - Sending audio -> NO I have headphones connectet direct to the URI on Pins 13 (GND) and 22/23 -> no nothing ☹ ☹ Von: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 14:11 An: App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> Betreff: Re: [App_rpt-users] no audio from URI Again, I'm not sure if it is your issue, but the chipset used in your board is of the same family as the one I seemed to have difficulty. When I chose a board with an older generation chipset (NM10, and not the 7x series), the audio worked good. Thanks, Bob kk6ecm Sent from iPad On Jun 3, 2014, at 4:19 AM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: i take this box http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/d... 73 de tom dh6mbt ________________________________ Von: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org>] im Auftrag von kk6ecm [kk6ecm@gmail.com<mailto:kk6ecm@gmail.com>] Gesendet: Dienstag, 3. Juni 2014 12:59 An: App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> Betreff: Re: [App_rpt-users] no audio from URI I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing). Thanks, Bob kk6ecm Sent from iPad On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: good morning, i connect a headphone to the URI so we don`t need to search the problem on the Motorolas.... 73... ________________________________ Von: David Morley [ab8tn1@cox.net<mailto:ab8tn1@cox.net>] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com<mailto:torben@klimt-online.com> Betreff: Re: [App_rpt-users] no audio from URI Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors Sent from my iPhone On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: Hi all, i think i have a little blackout ☹ I would like to set up a repeater with 2 GM360 <!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok <!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok <!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console) <!--[if !supportLists]-->- <!--[endif]-->PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 ☹ On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
hi all, here the missing information for the machines who don`t work :-( is there any ppossibility to run it in the future ? cause the INtel NUC is very nice ;-) greetings tom dh6mbt PC1: Modell : Intel NUC DC321IYE Homepage : http://www.intel.com/content/www/us/en/nuc/nuc-kit-dc3217iye.html Processor: Intel Core i3 processor Chipset : Intel QS77 Express Chipset PC2 and 3: Modell : Fujitsi Lifebook E780 Homepage : http://globalsp.ts.fujitsu.com/dmsp/Publications/public/db_profnb_lifebook_e... Processor: Intel Core i5 processor Chipset : Intel QM57 ________________________________ Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von torben@klimt-online.com [torben@klimt-online.com] Gesendet: Dienstag, 3. Juni 2014 23:33 An: kk6ecm; App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI IT WORKS NOW I tried the next pc (an older one) and it works fine without any config changes. It`s short before midnight and I must go to work tomorrow :( I will look the next days which CPUs and Chipsets I tried and doesn`t work and which one work now ok ? Good n8 tom dh6mbt Von: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 23:13 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI Try amplifying the output of the URI in order to drive the speaker. If that does not work, I'd test the URI using a loopback connector and uridiag down loaded from http://www.dmkeng.com/images/URI-FAQs.pdf Make sure Asterisk is stopped when uridiag is used. Service asterisk stop on the Linux command line. This is not a test to determine URI health, but the ability of the ACID build on your computer, and the ability to send audio to the URI. Thanks, Bob kk6ecm Sent from iPad On Jun 3, 2014, at 2:51 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: Now i tried 3 different computers with 2 URI-Boards and 3 installs - SQL detect by DSP -> ok - DTMF reading -> ok - Transmitting by PTT -> ok - Sending audio -> NO I have headphones connectet direct to the URI on Pins 13 (GND) and 22/23 -> no nothing :( :( Von: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 14:11 An: App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> Betreff: Re: [App_rpt-users] no audio from URI Again, I'm not sure if it is your issue, but the chipset used in your board is of the same family as the one I seemed to have difficulty. When I chose a board with an older generation chipset (NM10, and not the 7x series), the audio worked good. Thanks, Bob kk6ecm Sent from iPad On Jun 3, 2014, at 4:19 AM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: i take this box http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/d... 73 de tom dh6mbt ________________________________ Von: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org>] im Auftrag von kk6ecm [kk6ecm@gmail.com<mailto:kk6ecm@gmail.com>] Gesendet: Dienstag, 3. Juni 2014 12:59 An: App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> Betreff: Re: [App_rpt-users] no audio from URI I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing). Thanks, Bob kk6ecm Sent from iPad On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: good morning, i connect a headphone to the URI so we don`t need to search the problem on the Motorolas.... 73... ________________________________ Von: David Morley [ab8tn1@cox.net<mailto:ab8tn1@cox.net>] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com<mailto:torben@klimt-online.com> Betreff: Re: [App_rpt-users] no audio from URI Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors Sent from my iPhone On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: Hi all, i think i have a little blackout :( I would like to set up a repeater with 2 GM360 <!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok <!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok <!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console) <!--[if !supportLists]-->- <!--[endif]-->PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 :( On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Have you tried Iain's suggestion to disable the internal audio? See his email. Thanks, Bob kk6ecm Sent from iPad On Jun 4, 2014, at 5:24 AM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
hi all, here the missing information for the machines who don`t work :-( is there any ppossibility to run it in the future ? cause the INtel NUC is very nice ;-)
greetings tom dh6mbt
PC1: Modell : Intel NUC DC321IYE Homepage : http://www.intel.com/content/www/us/en/nuc/nuc-kit-dc3217iye.html Processor: Intel Core i3 processor Chipset : Intel QS77 Express Chipset
PC2 and 3: Modell : Fujitsi Lifebook E780 Homepage : http://globalsp.ts.fujitsu.com/dmsp/Publications/public/db_profnb_lifebook_e... Processor: Intel Core i5 processor Chipset : Intel QM57
Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von torben@klimt-online.com [torben@klimt-online.com] Gesendet: Dienstag, 3. Juni 2014 23:33 An: kk6ecm; App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI
IT WORKS NOW I tried the next pc (an older one) and it works fine without any config changes. It`s short before midnight and I must go to work tomorrow L I will look the next days which CPUs and Chipsets I tried and doesn`t work and which one work now ok ?
Good n8 tom dh6mbt
Von: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 23:13 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI
Try amplifying the output of the URI in order to drive the speaker. If that does not work, I'd test the URI using a loopback connector and uridiag down loaded from http://www.dmkeng.com/images/URI-FAQs.pdf
Make sure Asterisk is stopped when uridiag is used. Service asterisk stop on the Linux command line. This is not a test to determine URI health, but the ability of the ACID build on your computer, and the ability to send audio to the URI.
Thanks, Bob kk6ecm
Sent from iPad
On Jun 3, 2014, at 2:51 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
Now i tried 3 different computers with 2 URI-Boards and 3 installs
- SQL detect by DSP -> ok - DTMF reading -> ok - Transmitting by PTT -> ok - Sending audio -> NO
I have headphones connectet direct to the URI on Pins 13 (GND) and 22/23 -> no nothing L L
Von: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 14:11 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI
Again, I'm not sure if it is your issue, but the chipset used in your board is of the same family as the one I seemed to have difficulty. When I chose a board with an older generation chipset (NM10, and not the 7x series), the audio worked good.
Thanks, Bob kk6ecm
Sent from iPad
On Jun 3, 2014, at 4:19 AM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
i take this box
http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/d...
73 de tom dh6mbt Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von kk6ecm [kk6ecm@gmail.com] Gesendet: Dienstag, 3. Juni 2014 12:59 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI
I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing).
Thanks, Bob kk6ecm
Sent from iPad
On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
good morning, i connect a headphone to the URI so we don`t need to search the problem on the Motorolas....
73...
Von: David Morley [ab8tn1@cox.net] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com Betreff: Re: [App_rpt-users] no audio from URI
Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors
Sent from my iPhone
On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:
Hi all, i think i have a little blackout L I would like to set up a repeater with 2 GM360 <!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok <!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok <!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console) <!--[if !supportLists]-->- <!--[endif]-->PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 L On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
yes i disabled internal audio by the notebook, the intel nuc don`t have an internal audio ________________________________ Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von kk6ecm [kk6ecm@gmail.com] Gesendet: Mittwoch, 4. Juni 2014 11:42 An: App_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] no audio from URI Have you tried Iain's suggestion to disable the internal audio? See his email. Thanks, Bob kk6ecm Sent from iPad On Jun 4, 2014, at 5:24 AM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: hi all, here the missing information for the machines who don`t work :-( is there any ppossibility to run it in the future ? cause the INtel NUC is very nice ;-) greetings tom dh6mbt PC1: Modell : Intel NUC DC321IYE Homepage : http://www.intel.com/content/www/us/en/nuc/nuc-kit-dc3217iye.html Processor: Intel Core i3 processor Chipset : Intel QS77 Express Chipset PC2 and 3: Modell : Fujitsi Lifebook E780 Homepage : http://globalsp.ts.fujitsu.com/dmsp/Publications/public/db_profnb_lifebook_e... Processor: Intel Core i5 processor Chipset : Intel QM57 ________________________________ Von: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org>] im Auftrag von torben@klimt-online.com<mailto:torben@klimt-online.com> [torben@klimt-online.com<mailto:torben@klimt-online.com>] Gesendet: Dienstag, 3. Juni 2014 23:33 An: kk6ecm; App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> Betreff: Re: [App_rpt-users] no audio from URI IT WORKS NOW I tried the next pc (an older one) and it works fine without any config changes. It`s short before midnight and I must go to work tomorrow :( I will look the next days which CPUs and Chipsets I tried and doesn`t work and which one work now ok ? Good n8 tom dh6mbt Von: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org<mailto:pp_rpt-users-bounces@ohnosec.org>] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 23:13 An: App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> Betreff: Re: [App_rpt-users] no audio from URI Try amplifying the output of the URI in order to drive the speaker. If that does not work, I'd test the URI using a loopback connector and uridiag down loaded from http://www.dmkeng.com/images/URI-FAQs.pdf Make sure Asterisk is stopped when uridiag is used. Service asterisk stop on the Linux command line. This is not a test to determine URI health, but the ability of the ACID build on your computer, and the ability to send audio to the URI. Thanks, Bob kk6ecm Sent from iPad On Jun 3, 2014, at 2:51 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: Now i tried 3 different computers with 2 URI-Boards and 3 installs - SQL detect by DSP -> ok - DTMF reading -> ok - Transmitting by PTT -> ok - Sending audio -> NO I have headphones connectet direct to the URI on Pins 13 (GND) and 22/23 -> no nothing :( :( Von: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm Gesendet: Dienstag, 3. Juni 2014 14:11 An: App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> Betreff: Re: [App_rpt-users] no audio from URI Again, I'm not sure if it is your issue, but the chipset used in your board is of the same family as the one I seemed to have difficulty. When I chose a board with an older generation chipset (NM10, and not the 7x series), the audio worked good. Thanks, Bob kk6ecm Sent from iPad On Jun 3, 2014, at 4:19 AM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: i take this box http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/d... 73 de tom dh6mbt ________________________________ Von: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org>] im Auftrag von kk6ecm [kk6ecm@gmail.com<mailto:kk6ecm@gmail.com>] Gesendet: Dienstag, 3. Juni 2014 12:59 An: App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> Betreff: Re: [App_rpt-users] no audio from URI I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing). Thanks, Bob kk6ecm Sent from iPad On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: good morning, i connect a headphone to the URI so we don`t need to search the problem on the Motorolas.... 73... ________________________________ Von: David Morley [ab8tn1@cox.net<mailto:ab8tn1@cox.net>] Gesendet: Dienstag, 3. Juni 2014 07:14 An: torben@klimt-online.com<mailto:torben@klimt-online.com> Betreff: Re: [App_rpt-users] no audio from URI Are the GM 360s the same as the GM 300s? Do they have 16 pin connectors Sent from my iPhone On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> wrote: Hi all, i think i have a little blackout :( I would like to set up a repeater with 2 GM360 <!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok <!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok <!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console) <!--[if !supportLists]-->- <!--[endif]-->PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 :( On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
iain macdonnell - N6ML -
kk6ecm -
torben＠klimt-online.com