It was to begin with, but I commented it out, and still nothing. Andrew. From: Steve Agee <n5zua@earthlink.net> To: app_rpt-users@ohnosec.org Sent: Wednesday, July 29, 2015 2:00 AM Subject: Re: [App_rpt-users] enabling courtesy tones you don't have them disabled with a line reading: [2433] nounkeyct=1 do you? N5ZUA On 7/28/2015 11:37 PM, KD8USF wrote: I've tried to enable the courtesy tones but nothing happens, is there a line I need to add to the config to enable it? I'm just trying to use the defaults to start with. These lines are uncommented: unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 The only tone that does work is the command tone... Thanks. Andrew. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.