Hi- Moved to another QTH- hooked up my Pi and set ports to forward as I had previously. I can connect- see Allmon, etc- but connections always fail- whether from Zoiper or from iaxRpt on the PC. Here is an excerpt of status while I tried to connect to a node: -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack == Spawn extension (zoiper, 48654, 9) exited KEEPALIVE on 'IAX2/kk6qms-8612' -- Call accepted by 173.82.59.253 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/173.82.59.253:4569-4483' -- Hungup 'DAHDI/pseudo-1029768121' -- Hungup 'DAHDI/pseudo-1580665299' Any help appreciated- Clifford - KK6QMS
If everything thing else is the same, as in you have made no changes in IP, port etc... 1- check your firewall for your current port through of 2369 2- Make sure your /var/lib/asterisk/rpt_extnodes is up to date and check permissions/ownership on the file. or... it is probable your port is blocked by your new ISP. Try setting your iax port to2370 or 4570. Don't forget to match that port at the allstarlink portal as well in iax.conf/rpt.conf. Just my thoughts. But you did not mention connect to what... outbound connections is what I assumed. ...mike/kb8jnm On 12/14/2018 7:24 PM, cnovey wrote:
Hi-
Moved to another QTH- hooked up my Pi and set ports to forward as I had previously. I can connect- see Allmon, etc- but connections always fail- whether from Zoiper or from iaxRpt on the PC.
Here is an excerpt of status while I tried to connect to a node:
-- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack
== Spawn extension (zoiper, 48654, 9) exited KEEPALIVE on 'IAX2/kk6qms-8612'
-- Call accepted by 173.82.59.253 (format ulaw)
-- Format for call is ulaw
-- Hungup 'IAX2/173.82.59.253:4569-4483'
-- Hungup 'DAHDI/pseudo-1029768121'
-- Hungup 'DAHDI/pseudo-1580665299'
Any help appreciated-
Clifford – KK6QMS
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Never used 2369 before- but I added it both TCP and UDP- nada Match port in web portal? Dug around in there- didn't see anything I did notice this: "Node 48654 Main Stats Page <http://status.allstarlink.org/> Node 48654 is no longer in the database " From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Friday, December 14, 2018 5:43 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] connection failed If everything thing else is the same, as in you have made no changes in IP, port etc... 1- check your firewall for your current port through of 2369 2- Make sure your /var/lib/asterisk/rpt_extnodes is up to date and check permissions/ownership on the file. or... it is probable your port is blocked by your new ISP. Try setting your iax port to2370 or 4570. Don't forget to match that port at the allstarlink portal as well in iax.conf/rpt.conf. Just my thoughts. But you did not mention connect to what... outbound connections is what I assumed. ...mike/kb8jnm On 12/14/2018 7:24 PM, cnovey wrote: Hi- Moved to another QTH- hooked up my Pi and set ports to forward as I had previously. I can connect- see Allmon, etc- but connections always fail- whether from Zoiper or from iaxRpt on the PC. Here is an excerpt of status while I tried to connect to a node: -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack == Spawn extension (zoiper, 48654, 9) exited KEEPALIVE on 'IAX2/kk6qms-8612' -- Call accepted by 173.82.59.253 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/173.82.59.253:4569-4483' -- Hungup 'DAHDI/pseudo-1029768121' -- Hungup 'DAHDI/pseudo-1580665299' Any help appreciated- Clifford - KK6QMS _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I miss typed that port but I figured you know what I meant. Check your firewall to allow your 4569 port through it, not 2369. No, you are not registered. Check your iax.conf for error type error bad password etc register=48654:pass#@register.allstarlink.org You will not be able to connect inbound or outbound until the node is registered. ...mike/kb8jnm On 12/14/2018 9:03 PM, cnovey wrote:
Never used 2369 before- but I added it both TCP and UDP- nada
Match port in web portal? Dug around in there- didn’t see anything
I did notice this:
“Node 48654
Main Stats Page <http://status.allstarlink.org/>
Node 48654 is no longer in the database
“
*From:* App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> *On Behalf Of *Mike *Sent:* Friday, December 14, 2018 5:43 PM *To:* app_rpt-users@lists.allstarlink.org *Subject:* Re: [App_rpt-users] connection failed
If everything thing else is the same, as in you have made no changes in IP, port etc...
1- check your firewall for your current port through of 2369
2- Make sure your /var/lib/asterisk/rpt_extnodes is up to date and check permissions/ownership on the file.
or...
it is probable your port is blocked by your new ISP.
Try setting your iax port to2370 or 4570.
Don't forget to match that port at the allstarlink portal as well in iax.conf/rpt.conf.
Just my thoughts. But you did not mention connect to what... outbound connections is what I assumed.
...mike/kb8jnm
On 12/14/2018 7:24 PM, cnovey wrote:
Hi-
Moved to another QTH- hooked up my Pi and set ports to forward as I had previously. I can connect- see Allmon, etc- but connections always fail- whether from Zoiper or from iaxRpt on the PC.
Here is an excerpt of status while I tried to connect to a node:
-- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack
== Spawn extension (zoiper, 48654, 9) exited KEEPALIVE on 'IAX2/kk6qms-8612'
-- Call accepted by 173.82.59.253 (format ulaw)
-- Format for call is ulaw
-- Hungup 'IAX2/173.82.59.253:4569-4483'
-- Hungup 'DAHDI/pseudo-1029768121'
-- Hungup 'DAHDI/pseudo-1580665299'
Any help appreciated-
Clifford – KK6QMS
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 12/14/18 7:24 PM, cnovey wrote:
Hi- -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack
You have the node password incorrect. [Dec 15 02:25:45] NOTICE[29658] chan_iax2.c: Host 23.241.113.252 failed MD5 authentication for '48654' (ff2759ceba964257d97305012973b84c != 1492cb51d65cc8e03b63ba866555b6ff) Get the password from the portal and make sure it's set in iax.conf with your register statement. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
So strange- ya I figured that out- just not sure how it got changed. Thanks for the fast help folks!! Clifford -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Bryan Fields Sent: Friday, December 14, 2018 6:43 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] connection failed On 12/14/18 7:24 PM, cnovey wrote:
Hi- -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack
You have the node password incorrect. [Dec 15 02:25:45] NOTICE[29658] chan_iax2.c: Host 23.241.113.252 failed MD5 authentication for '48654' (ff2759ceba964257d97305012973b84c != 1492cb51d65cc8e03b63ba866555b6ff) Get the password from the portal and make sure it's set in iax.conf with your register statement. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Every app_rpt install comes with a free gremlin ! Thought you knew that ! However, once you have it working correct, why not image your SD card and save it in the case it is going bad. ...mike/kb8jnm On 12/14/2018 10:15 PM, cnovey wrote:
So strange- ya I figured that out- just not sure how it got changed. Thanks for the fast help folks!! Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Bryan Fields Sent: Friday, December 14, 2018 6:43 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] connection failed
On 12/14/18 7:24 PM, cnovey wrote:
Hi- -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack You have the node password incorrect.
[Dec 15 02:25:45] NOTICE[29658] chan_iax2.c: Host 23.241.113.252 failed MD5 authentication for '48654' (ff2759ceba964257d97305012973b84c != 1492cb51d65cc8e03b63ba866555b6ff)
Get the password from the portal and make sure it's set in iax.conf with your register statement.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Haha! Ya man. I do have an image on my PC- I am prepared- but would only resort to using it if really necessary. Learn more solving the issue as long as the card is not corrupted. Issue now is stuttering audio really bad- even the telemetry coming right off the Pi locally over ethernet to iaxRpt on PC is choppy. Pi3 is 1-3% CPU- plenty of RAM free etc. Trying to sort that out now. Thanks! Clifford -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Friday, December 14, 2018 7:20 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] connection failed Every app_rpt install comes with a free gremlin ! Thought you knew that ! However, once you have it working correct, why not image your SD card and save it in the case it is going bad. ...mike/kb8jnm On 12/14/2018 10:15 PM, cnovey wrote:
So strange- ya I figured that out- just not sure how it got changed. Thanks for the fast help folks!! Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Bryan Fields Sent: Friday, December 14, 2018 6:43 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] connection failed
On 12/14/18 7:24 PM, cnovey wrote:
Hi- -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack You have the node password incorrect.
[Dec 15 02:25:45] NOTICE[29658] chan_iax2.c: Host 23.241.113.252 failed MD5 authentication for '48654' (ff2759ceba964257d97305012973b84c != 1492cb51d65cc8e03b63ba866555b6ff)
Get the password from the portal and make sure it's set in iax.conf with your register statement.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
What are you using for a URI ? How many usb devices ? What are you listening on iaxrpt, radio, other node ? You might also check codec settings for corruption in iax.conf ...mike/kb8jnm On 12/14/2018 10:50 PM, cnovey wrote:
Haha! Ya man. I do have an image on my PC- I am prepared- but would only resort to using it if really necessary. Learn more solving the issue as long as the card is not corrupted.
Issue now is stuttering audio really bad- even the telemetry coming right off the Pi locally over ethernet to iaxRpt on PC is choppy. Pi3 is 1-3% CPU- plenty of RAM free etc. Trying to sort that out now.
Thanks! Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Friday, December 14, 2018 7:20 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] connection failed
Every app_rpt install comes with a free gremlin !
Thought you knew that !
However, once you have it working correct, why not image your SD card and save it in the case it is going bad.
...mike/kb8jnm
On 12/14/2018 10:15 PM, cnovey wrote:
So strange- ya I figured that out- just not sure how it got changed. Thanks for the fast help folks!! Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Bryan Fields Sent: Friday, December 14, 2018 6:43 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] connection failed
On 12/14/18 7:24 PM, cnovey wrote:
Hi- -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack You have the node password incorrect.
[Dec 15 02:25:45] NOTICE[29658] chan_iax2.c: Host 23.241.113.252 failed MD5 authentication for '48654' (ff2759ceba964257d97305012973b84c != 1492cb51d65cc8e03b63ba866555b6ff)
Get the password from the portal and make sure it's set in iax.conf with your register statement.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Nothing- no radio yet- just iax connections using PC soft and headset No USB devices at all iaxRpt software will check iax.conf thanks!! -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Friday, December 14, 2018 7:56 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] connection failed What are you using for a URI ? How many usb devices ? What are you listening on iaxrpt, radio, other node ? You might also check codec settings for corruption in iax.conf ...mike/kb8jnm On 12/14/2018 10:50 PM, cnovey wrote:
Haha! Ya man. I do have an image on my PC- I am prepared- but would only resort to using it if really necessary. Learn more solving the issue as long as the card is not corrupted.
Issue now is stuttering audio really bad- even the telemetry coming right off the Pi locally over ethernet to iaxRpt on PC is choppy. Pi3 is 1-3% CPU- plenty of RAM free etc. Trying to sort that out now.
Thanks! Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Friday, December 14, 2018 7:20 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] connection failed
Every app_rpt install comes with a free gremlin !
Thought you knew that !
However, once you have it working correct, why not image your SD card and save it in the case it is going bad.
...mike/kb8jnm
On 12/14/2018 10:15 PM, cnovey wrote:
So strange- ya I figured that out- just not sure how it got changed. Thanks for the fast help folks!! Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Bryan Fields Sent: Friday, December 14, 2018 6:43 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] connection failed
On 12/14/18 7:24 PM, cnovey wrote:
Hi- -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack You have the node password incorrect.
[Dec 15 02:25:45] NOTICE[29658] chan_iax2.c: Host 23.241.113.252 failed MD5 authentication for '48654' (ff2759ceba964257d97305012973b84c != 1492cb51d65cc8e03b63ba866555b6ff)
Get the password from the portal and make sure it's set in iax.conf with your register statement.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Well- using a USB headset helps the issue a lot. I was enjoying a new BT earpiece but wow- suck-ola. I seem to recall some BT tweaks to improve performance but do not recall. Anyway- guess I will stick w wired/USB headset for now. Clifford -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Friday, December 14, 2018 7:56 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] connection failed What are you using for a URI ? How many usb devices ? What are you listening on iaxrpt, radio, other node ? You might also check codec settings for corruption in iax.conf ...mike/kb8jnm On 12/14/2018 10:50 PM, cnovey wrote:
Haha! Ya man. I do have an image on my PC- I am prepared- but would only resort to using it if really necessary. Learn more solving the issue as long as the card is not corrupted.
Issue now is stuttering audio really bad- even the telemetry coming right off the Pi locally over ethernet to iaxRpt on PC is choppy. Pi3 is 1-3% CPU- plenty of RAM free etc. Trying to sort that out now.
Thanks! Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Friday, December 14, 2018 7:20 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] connection failed
Every app_rpt install comes with a free gremlin !
Thought you knew that !
However, once you have it working correct, why not image your SD card and save it in the case it is going bad.
...mike/kb8jnm
On 12/14/2018 10:15 PM, cnovey wrote:
So strange- ya I figured that out- just not sure how it got changed. Thanks for the fast help folks!! Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Bryan Fields Sent: Friday, December 14, 2018 6:43 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] connection failed
On 12/14/18 7:24 PM, cnovey wrote:
Hi- -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack You have the node password incorrect.
[Dec 15 02:25:45] NOTICE[29658] chan_iax2.c: Host 23.241.113.252 failed MD5 authentication for '48654' (ff2759ceba964257d97305012973b84c != 1492cb51d65cc8e03b63ba866555b6ff)
Get the password from the portal and make sure it's set in iax.conf with your register statement.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I had one occurrence over the last 4 weeks. Corrected with a reboot. 73, Marty WD9GYM
On Dec 14, 2018, at 10:27 PM, cnovey <cnovey@gmail.com> wrote:
Well- using a USB headset helps the issue a lot. I was enjoying a new BT earpiece but wow- suck-ola. I seem to recall some BT tweaks to improve performance but do not recall. Anyway- guess I will stick w wired/USB headset for now. Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Friday, December 14, 2018 7:56 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] connection failed
What are you using for a URI ?
How many usb devices ?
What are you listening on iaxrpt, radio, other node ?
You might also check codec settings for corruption in iax.conf
...mike/kb8jnm
On 12/14/2018 10:50 PM, cnovey wrote:
Haha! Ya man. I do have an image on my PC- I am prepared- but would only resort to using it if really necessary. Learn more solving the issue as long as the card is not corrupted.3
Issue now is stuttering audio really bad- even the telemetry coming right off the Pi locally over ethernet to iaxRpt on PC is choppy. Pi3 is 1-3% CPU- plenty of RAM free etc. Trying to sort that out now.
Thanks! Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Friday, December 14, 2018 7:20 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] connection failed
Every app_rpt install comes with a free gremlin !
Thought you knew that !
However, once you have it working correct, why not image your SD card and save it in the case it is going bad.
...mike/kb8jnm
On 12/14/2018 10:15 PM, cnovey wrote:
So strange- ya I figured that out- just not sure how it got changed. Thanks for the fast help folks!! Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Bryan Fields Sent: Friday, December 14, 2018 6:43 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] connection failed
On 12/14/18 7:24 PM, cnovey wrote:
Hi- -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack You have the node password incorrect.
[Dec 15 02:25:45] NOTICE[29658] chan_iax2.c: Host 23.241.113.252 failed MD5 authentication for '48654' (ff2759ceba964257d97305012973b84c != 1492cb51d65cc8e03b63ba866555b6ff)
Get the password from the portal and make sure it's set in iax.conf with your register statement.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Bryan Fields -
cnovey -
Martin Boroff -
Mike