- Allstar-Digital - lists.keekles.org

Dv4mini
by Robert Newberry 15 May '16

15 May '16

I noticed my dv4mini isn't working so hot. I looked at it and when I attempt to transmit with my HT the LED on the dv4mini switches from blue to green, but will alternate to yellow. Looking at the control panel it appears to switching from active rx to idle repeatedly. Is there a user group for these things? N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

3 2

Yaesu Fusion
by David Shaw 15 May '16

15 May '16

Hello Everyone, I'll be heading to Dayton this year. I wanted to ask this group if they are going to work on a ASL <-> Fusion. Just wanted to see before I spent my money on the DV4Home. http://wirelesshold.com/dv4home-2.aspx -- Gun Control https://youtu.be/GpOX7ICsnJk -- In 1988, America was strong. We had Ronald Reagan, Steve Jobs, Johnny Cash, and Bob Hope. Today, we have Obama, no Jobs, no Cash, and no Hope. Thanks, David

2 2

DMRGateway Steering one way audio
by Robert Newberry 13 May '16

13 May '16

Well I sat down tonight and started working on gateway steering. So I added to /opt/dmrlink/ambe_audio/ambe_audio.cfg. [ME_SW] tgFilter = 3123 txTg = 3123 txTs = 2 I then typed from the shell prompt. echo -n "section=ME_SW" | nc 127.0.0.1 31002 I have one way audio. I can hear audio coming from BM, but audio from DMRGateway is not being heard across BM. I'm able to steer, but only part way. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

3 25

What booth at Dayton?
by Robert Newberry 12 May '16

12 May '16

What booth space will you be at during Dayton? My friend will be there he wanted to stop by. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

3 3

Using AllStar DTMF to steer DMRGateway
by Steve Zingman 11 May '16

11 May '16

It's easy to steer your DMRGateway via DTMF or CLI or AllMon or AndroidIAX. Consider the following snip from ambe_audio.cfg section = BM # Use BM section values # order of precedence: dmrlink.cfg, section=, DEFAULTS [BM] # Listen to all, TX on TG3100 TS1 tgFilter = 3100,3106,31094 # A list of TG IDs to monitor. All TGs will be passed to DMRGateway txTg = 3100 # TG to use for all frames received from DMRGateway -> IPSC txTs = 2 # Slot to use for frames received from DMRGateway -> IPSC [BM3100] # Brandmeister tgFilter = 3100 # USA Nationwide txTg = 3100 txTs = 1 [BM3106] # Brandmeister tgFilter = 3106 # California Statewide txTg = 3106 txTs = 2 [BM31094] # Brandmeister tgFilter = 31094 # US call area 4 txTg = 31094 txTs = 1 [Sandbox] # Sandbox network tgFilter = 3120 txTg = 3120 txTs = 2 [LOCAL] # Local network tgFilter = 3 txTg = 3 txTs = 2 [Shutup] # Be quiet tgFilter = 0 txTg = 0 txTs = 2 /etc/asterisk/rpt.conf ; DMRGateway Commands 73 = cmd,/bin/bash -c 'echo -n "section=Shutup" | nc 127.0.0.1 31002' 74 = cmd,/bin/bash -c 'echo -n "section=BM" | nc 127.0.0.1 31002' 76 = cmd,/bin/bash -c 'echo -n "section=DMR-MARC" | nc 127.0.0.1 31002' 77 = cmd,/bin/bash -c 'echo -n "section=BM3100" | nc 127.0.0.1 31002' 78 = cmd,/bin/bash -c 'echo -n "section=BM3106" | nc 127.0.0.1 31002' 79 = cmd,/bin/bash -c 'echo -n "section=BM31094" | nc 127.0.0.1 31002' Issue a *73 from a radio (simplified for example) and ambe_audio will use the section [Shutup] Issue a *77 from a radio (simplified for example) and ambe_audio will use the section [BM3100] Replace radio with CLI or AllMon or AndroidIAX. Add a script to cron ... Available remote control commands: 'reread_subscribers' 'reread_config' 'txTg' 'txTs' 'section' 'gateway_dmr_id' 'gateway_peer_id' 'restart' 'playbackFromFile' 'tgs' 'dump_template' 'get_info' See: <https://github.com/N4IRS/DMRGateway/blob/master/DMRGatewayDiagram.pdf> <https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.rtf> <https://github.com/N4IRS/DMRGateway/blob/master/DMRGatewayTechOverview.pdf> For INAD, 73 Steve N4IRS -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

4 10

DMRGateway.ini
by Robert Newberry 11 May '16

11 May '16

I decided to change the subject to more accurately reflect what we're talking about. I took a look at /etc/DMRGateway.ini. Currently my RPI2 and DV3000 reside at the site with the repeater. I'd like to set something like this up at home. I have a few questions. Can I just get another pi and install DMRlink and DMRGateway and point DMRGateway.ini to my remote site via IP? Or would I need to also have a DV3000 installed at home as well? I assume the cheap little USB fobs we use for ASL would be OK? N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

3 6

D-STAR to DMR via AllStar
by n8ohu＠yahoo.com 11 May '16

11 May '16

Good evening folks, I'm in the process of bringing my AllStar nodes back up after a goofy issue with my network and was wondering if anyone here was considering implementing a D-STAR to DMR bridge on their AllStar node, and what the best way to do it would be. I have a DV-Dongle and a DV-3000 that I could use for the purpose. Matthew PIttsN8OHU

5 9

DV4Home
by Robert Newberry 11 May '16

11 May '16

Anyone seen this yet? It sounds similar to something Mike teased a while back with a RPI2, DV3000, with a speaker and microphone. Are there any updates on this? N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

3 13

DMRGui screen shots
by Steve Zingman 11 May '16

11 May '16

Here are a couple of screen shots of DMRGui. It can be used standalone (with ambe_audio and DMRGateway) plus mic and speaker to access a IPSC network. (DMR-MARC, DCI, BrandMeister...) or control a existing ASL <---> DMR Gateway. The screenshot I took was from my Windows 7 machine. The DMRGui will use any X Window server. Free versions of the X Window server are available for Windows, OSX, Android and of course Linux. <https://www.dropbox.com/s/zudl1vdbkfp2v02/DMRGui.PNG> <https://www.dropbox.com/s/4q4ae912fmz35wh/DMRGui_1.PNG> -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Local TG
by Robert Newberry 10 May '16

10 May '16

I was setting up TS2 TG9 for a local repeat only. Would I need to do anything in my bridge_rules.py? I'm thinking no since it is only repeating locally. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

3 2