Here is some more information for those who might help.
Asterisk 2.6GHz, 512MB, PC Host
Centos 4.4
asterisk-1.2.13
asterisk-addons-1.2.5
libpri-1.2.4
zaptel-1.2.11
1 Digium TMD-400P with 3 FXS cards and 1 FXO card.
2 ARIB Interfaces.
First ARIB interface is connected to Zap1-2 and then to a full-duplex
transceiver (repeater). Of course all of the repeater logic is
disconnected since app-rpt takes care of that. It works and sounds well.
Second ARIB interface is connected to Zap3 and a simplex transceiver. It
was installed first on Zap2 and worked fine until I moved it to Zap3 and
put the repeater on Zap1-2.
The iaxRpt client worked fine with the simplex radio and now works fine
with the repeater.
I've got things set up with private node numbers now so as to not bother
everyone. Looking forward to getting it all back on line and showing it
off.
Here's the current zaptel.conf
----------------------------------
[root@auggie etc]# cat zaptel.conf
#
# zaptel.conf
#
# Repeater Full Duplex 2 FXS
fxogs=1 # TX pair
fxols=2 # RX pair
# Simplex Radio 1 FXS
e&m=3 # TX/RX on single channel
# fxo card
fxsks=4
loadzone = us
defaultzone=us
#
# End of file
#
Here's the current zapata.conf
----------------------------
[root@auggie asterisk]# cat zapata.conf
;
; Zapata telephony interface
;
; Configuration file
; 20061127 1135 sphenke merged
; 20061203 1925 sphenke adding repeater channel
; We empirically learned that normal Zap channels (e.g. non-e&m) must be
; defined before the app-rpt e&m channels or they will not load.
[trunkgroups]
[channels]
signalling=fxo_ks
callwaitingcallerid=no
echocancel=yes
echocancelwhenbridged=yes
echotraining=no
relaxdtmf=yes
immediate=no
adsi=off
usecallerid=yes
callgroup=1
pickupgroup=1
group=1
;Include AMP configs
#include zapata_additional.conf
relaxdtmf=yes
; Repeater TX
callerid=asreceived
context=repeatertx
callwaiting=no
threewaycalling=no
transfer=no
mailbox=
signalling=fxo_tx
channel=>1
; Repeater RX
signalling=fxo_rx
context=repeaterrx
threewaycalling=no
callwaiting=no
transfer=no
mailbox=
channel=>2
; Simplex Station TX/RX
signalling=em_rxtx
context=repeaterrx
threewaycalling=no
callwaiting=no
transfer=no
mailbox=
channel=>3
group=9
channel=>pseudo
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs (moved see above)
;#include zapata_additional.conf
;
; End of file
;
Here's the current rpt.conf
----------------------------
[root@auggie asterisk]# cat rpt.conf
; Radio Repeater configuration file (for use with app_rpt)
;
; 20061203 2015 sphenke installing repeater interface
;
; auggie repeater
;
[3001] ; Name of First Repeater
rxchannel = Zap/2 ; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
txchannel = Zap/1 ; Tx audio/signalling channel
functions=functions ; Repeater Function Table
link_functions=link-functions ; Link Function Table
telemetry=telemetry ; Telemetry descriptions
wait_times=wait-times ; Wait times
context = radio ; dialing context for phone
callerid = "Your Repeater" <6198192562> ; callerid for phone calls
idrecording = /etc/asterisk/id ; id recording
accountcode=RADIO ; account code (optional)
hangtime=1000 ; squelch tail hang time (in ms)
(optional)
totime=170000 ; transmit time-out time (in ms)
(optional)
idtime=540000 ; id interval time (in ms) (optional)
; The default values for hangtime, time-out time, and id interval time are
; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms)
; respectively
politeid=30000 ; time in milliseconds before ID
timer
; expires to try and ID in the tail.
; (optional, default is 30000).
idtalkover=|iid/r ; Talkover ID (optional) default
is none
unlinkedct=ct2 ; unlinked courtesy tone
(optional) default is none
;
; auggie simplex radio
;
;[2057] ; Name of First Repeater
[3003]
rxchannel = Zap/3 ; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/1 ; Tx audio/signalling channel
functions=functions ; Repeater Function Table
link_functions=link-functions ; Link Function Table
telemetry=telemetry ; Telemetry descriptions
wait_times=wait-times ; Wait times
duplex=0 ; Half-duplex
context = radio ; dialing context for phone
callerid = "Your Repeater" <6198192562> ; callerid for phone calls
idrecording = /etc/asterisk/id ; id recording
accountcode=RADIO ; account code (optional)
hangtime=100 ; squelch tail hang time (in ms)
(optional)
totime=170000 ; transmit time-out time (in ms)
(optional)
idtime=540000 ; id interval time (in ms) (optional)
archivedir= /var/log/asterisk/rpt
; The default values for hangtime, time-out time, and id interval time are
; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms)
; respectively
politeid=30000 ; time in milliseconds before ID
timer
; expires to try and ID in the tail.
; (optional, default is 30000).
idtalkover=|iid/r ; Talkover ID (optional) default
is none
unlinkedct=ct2 ; unlinked courtesy tone (optional)
; default is none
;
; Repeater function table for node 010
;
[functions]
1=ilink,1 ; Specific link disconnect
2=ilink,2 ; Specific Link connect - monitor
only
3=ilink,3 ; Specific Link connect - transceive
4=ilink,4 ; Enter command mode on a specific
link
7=ilink,5 ; Link status
80=status,1 ; System info
81=status,2 ; Time
82=status,3 ; app_rpt.c Version
6=autopatchup ; Autopatch up
0=autopatchdn ; Autopatch down
99=cop,4 ; Audio test tone
;
; Link function table
;
; If this section is defined, then the remote user accessing our machine
in command mode
; will only be able to do the functions defined in this section. If this
section is
; omitted, then the link functions will be the same as the repeater
functions.
;
[link-functions]
1=ilink,1 ; Specific link disconnect
2=ilink,2 ; Specific Link connect - monitor
only
3=ilink,3 ; Specific Link connect - transceive
7=ilink,5 ; Link status
80=status,1 ; System info
81=status,2 ; Time
82=status,3 ; app_rpt.c Version
6=autopatchup ; Autopatch up
0=autopatchdn ; Autopatch down
99=cop,4 ; Audio test tone
[telemetry]
; Telemetry entries can be shared across all repeaters, or defined for
each repeater.
; Can be a tone sequence, morse string, or a file
;
; |t - Tone escape sequence
;
; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2,
duration, amplitude)
; Single frequencies are created by setting freq1 or freq2 to zero.
;
; |m - Morse escape sequence
;
; Sends Morse code at the telemetry amplitude and telemetry frequency as
defined in the
; [morse] section.
;
; Follow with an alphanumeric string
;
; |i - Morse ID escape sequence
;
; Sends Morse code at the ID amplitude and ID frequency as defined in the
; [morse] section.
;
; Follow with an alphanumeric string
ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
ct2=|t(660,880,150,2048)
ct3=|t(440,0,150,2048)
ct4=|t(550,0,150,2048)
ct5=|t(660,0,150,2048)
ct6=|t(880,0,150,2048)
ct7=|t(660,440,150,2048)
ct8=|t(700,1100,150,2048)
remotetx=|t(1633,0,75,2048)(0,0,75,0)(1209,0,75,2048);
remotemon=|t(1209,0,75,2048)
cmdmode=|t(900,903,200,2048)
functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
;
; Morse code parameters, these are common to all repeaters.
;
[morse]
speed=20 ; Approximate speed in WPM
frequency=800 ; Morse Telemetry Frequency
amplitude=4096 ; Morse Telemetry Amplitude
idfrequency=1064 ; Morse ID Frequency
idamplitude=3072 ; Morse ID Amplitude
;
; This section allows wait times for telemetry events to be adjusted
; A section for wait times can be defined for every repeater
;
[wait-times]
telemwait=1750 ; Time to wait before sending most
telemetry
idwait=500 ; Time to wait before starting ID
unkeywait=1000 ; Time to wait after unkey before
sending CT's and link telemetry
calltermwait=1500 ; Time to wait before announcing
"call terminated"
;
; This is where you define your nodes which can be connected to.
;
[nodes]
;2057= radio(a)127.0.0.1/2057,NONE ; This must be changed to your
node number
3001=radio(a)127.0.0.1/3001,NONE
3003=radio(a)127.0.0.1/3003,NONE
;
; end of file
;
And finally iax.conf
----------------------------
[root@auggie asterisk]# cat iax.conf
; Inter-Asterisk eXchange driver definition
;
;
[general]
bindport = 4569 ; Port to bind to (IAX is 4569)
bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine)
disallow=all
allow=ulaw
allow=alaw
allow=gsm
allow=g726
jitterbuffer=yes
tos=lowdelay
mailboxdetail=yes
#include iax_additional.conf
#include additional_a2billing_sip.conf
; Incoming radio connections
[radio]
type=user
disallow=all
allow=g726
allow=gsm
codecpriority=host
context=radio-secure
[gui]
type=user
disallow=all
allow=g726
allow=gsm
codecpriority=host
context=radio-gui
;secret=purdue
secret=xxxxxxx
NODE=3003
[radio]
type=user
disallow=all
allow=g726
allow=gsm
codecpriority=host
context=radio-secure
[gui]
type=user
disallow=all
allow=g726
allow=gsm
codecpriority=host
context=radio-gui
;secret=purdue
secret=xxxxxxx
; end of radios
; Setup for outgoing calls
[yourprovider] ; This needs to change
type=peer
host=127.0.0.1
secret=nunya
auth=md5
notransfer=yes
disallow=all
allow=gsm
----------------------------------------
Any help is appreciated.
Steve Henke, W9SH
