March 2011 - App_rpt-users - lists.keekles.org

Fwd: Re: Allstar QSO Recording
by Keith Williamson 30 Jan '13

30 Jan '13

---------- Forwarded message ---------- From: "Keith Williamson" <hkwilliamson(a)gmail.com> Date: Feb 7, 2011 10:22 AM Subject: Re: Allstar QSO Recording To: "Bobby Lacey" <kf4gta(a)amsat.org> Cc: "app_rpt users list" <app_rpt-users(a)qrvc.com> Hi Bobby, The latest version which added remote command script capability is NodeShark v0.95 and can be downloaded from here: http://www.arizuni.com/NodeShark/ 73's, Keith KF7DRV Allstar: 2541 On 2/7/11, Bobby Lacey <kf4gta(a)amsat.org> wrote: > Hi Keith, > > I noticed on the app_rpt list that you were working on an interface for > playing recorded QSOs. I am really interested in this and was curious if you > have ever released it? Would love to try it out. > > Tnx & 73 > Bobby KF4GTA > -- Sent from my mobile device

3 2

SheevaPlug
by Monty Dana 03 Jan '12

03 Jan '12

Anyone ever try to run app_rpt on the SheevaPlug <http://plugcomputer.org/>? -- Monty

4 3

simpleusb
by George Csahanin 10 Jun '11

10 Jun '11

Hey y'all, I confuse easily. I want to try running COS and PTT from parallel port, much cleaner than microsurgery on the USB fob, did one - wasn't too bad. But the radios I use all have COS and/or PL decode outs. And the USB squelch is still a bit "odd". But the parallel port interface would make it plug compatible (I think) with my currently deployed DRIL system nailed up from here in TX to my folks home in NJ(They're hams too). I see the documentation: http://ohnosec.org/drupal/node/177 "Manipulating GPIO (and Parallel Printer Port) signals within chan_usbradio and chan_simpleusb" But I'm not fully certain of how to implement this. I'm using version 0.273. Unsure of the meaning of this, exactly: "(from within the section of usbradio.conf that is for the desired device):" In a typical simpleusb.conf where exactly does it go, or better yet, can someone send a sample of a working config file? I have not been able to locate a sample that explains this. I know I need to change "rxchannel=Radio/usb2360" (or 2428 for my remote) in rpt.conf. I have an example of simpleusb.conf. I see under [general] there is [usb]. would that [usb] change to [usb2360]? Then the stuff like: pp2 = out1 ; out0, out1 or ptt pp10 = in ; in, cor or ctcss goes under the [usb2360]??? Last dumb question, does the simpleusb work with the Limey Linux distro, that is an outstanding way to make a system with (almost) no moving parts. I use D945GLLY boards. HALP! I wanted to fiddle with this over the long weekend. I plan on replacing the DRIL link to NJ with a pair of app_rpt systems. The far end in NJ will probably be an "unlisted" node, maybe not... I am totally impressed with what has been done with asterisk here, and have possible made another convert here in Austin and maybe another in the Toronto area. I'd love to get it to run on my Sheeva Plug computer, but haven't yet fiddled with compiling a kernel and initrd on that one yet. Enough for now, goodnight to all. George Csahanin W2DB Cedar Park, TX 2360

3 4

Anyone compiling asterisk from sources on Debian.
by Tom Russo 06 Apr '11

06 Apr '11

I'm getting started on a project that will ultimately use asterisk/app_rpt to handle a repeater linking system in a fairly complex set-up. For the moment I have a simple proof-of-concept project before me, but because it's ultimately going to be a big, non-allstarlink project I really don't want to use ACID or anything other pre-packaged system that's meant to be turn-key for a simple set-up. I'm much more familiar with Debian-based systems than with Fedora/RH/CentOS systems, and so I would rather use that as the base. I've got Debian Squeeze (the current stable system) installed on an otherwise empty machine, have pulled the files.tar.gz file from the place where ACID's installer would have downloaded it, and have installed all the dependencies (libraries, dev packages for them, kernel headers, etc.). But right now I'm encountering Issues building the Zaptel kernel module that I don't quite get. Is anyone here using the app_rpt sources of Asterisk on a Debian system who might be able to help me diagnose what's going wrong with my build? The short story is that the zaptel kernel module build is behaving very much like it's not getting the kernel headers right, even though the correct headers for the kernel are installed. It doesn't complain about not finding specific files, though, it's merely dying during compilation of pciradio.c with undefined macros that are definitely present in kernel headers that it should have found. I don't want to burden the list with details unless there is interest in the solution, though. If someone else is using app_rpt on a Debian-based system, I'd love to be in contact to hash out details. -- Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM "The truth will set you free, but first it will piss you off."

4 5

Help with login
by Chad Martin 30 Mar '11

30 Mar '11

Hello all, I am having some trouble with a install. I have put centos on a computer. I change the root and the password and the pc again reboots. I get a blinking green led on my uri but I cant log into the pc at the loging screen. I have tried my node number, and allstar created password, i have tried my actual allstar log in information and several other variations. Any help would be appreciated. Thanks in advance Chad S. Martin

3 2

Re: [App_rpt-users] [SPAM] App_rpt-users Digest, Vol 25, Issue 40
by George Csahanin 30 Mar '11

30 Mar '11

Wasn't talking about the app_rpt box, meant the web site features. GeorgeC > > ------------------------------ > > Message: 2 > Date: Wed, 30 Mar 2011 08:03:19 -0400 > From: "Bryan D. Boyle" <bdboyle(a)bdboyle.com> > To: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] Help with login > Message-ID: <4D931C07.4040503(a)bdboyle.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Userid: root > Password: whatever you changed it to during the centos install process.

1 0

Help logging in
by George Csahanin 29 Mar '11

29 Mar '11

I have been trying to login to drupal and keep getting rejected From here I can get in and get a list of list members: http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users Can't login here: http://ohnosec.org/drupal/node/3 Also, can no longer log into mantis, forgot what username I used then, probably wb2dyb or george(a)dyb.com Oh yeah, I can send mail to the list. Applied a couple of times to set new account, and never received any confirmation e-mail. Can anyone help me? GeorgeC W2DB 2360

1 0

Re: [App_rpt-users] New Releases
by David KE6UPI 29 Mar '11

29 Mar '11

https://allstarlink.org/voter.html On Tue, Mar 29, 2011 at 1:47 PM, David Osborn <david.osborn(a)manx.net> wrote: > Scratching around the SVN repository I noticed mention of a “Voter” and, > upon further reading, talk of simulcast systems. > > > > This is v-e-r-y interesting. Is this part of the overall AllStar setup? > Where can I learn more about this aspect of the project and how I can get up > to speed? > > > > David Osborn > > GD4HOZ > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

1 0

Config files for Santiago Board
by KC2WDZ 29 Mar '11

29 Mar '11

I'm trying to figure out how to configure app_rpt to use the Santiago Board between an existing controller and repeater. Should duplex=1 in rpt.conf ? as for usbradio.conf only the following underlined are needed ?? *hdwtype=0 rxboost=1 *txboost=1 *rxctcssrelax=1 *txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 ;rxctcssoverride=0 carrierfrom=vox ctcssfrom=no rxdemod=speaker txprelim=no txlimonly=no txtoctype=no *txmixa=composite* txmixb=no *invertptt=0 duplex=0 *rxondelay=0 rxnoisefiltype=0 *eeprom=0*

1 0

Re: [App_rpt-users] New Releases
by David Osborn 29 Mar '11

29 Mar '11

Scratching around the SVN repository I noticed mention of a "Voter" and, upon further reading, talk of simulcast systems. This is v-e-r-y interesting. Is this part of the overall AllStar setup? Where can I learn more about this aspect of the project and how I can get up to speed? David Osborn GD4HOZ

1 0