August 2018 - App_rpt-users - lists.keekles.org

AP2CJ Node 48092 no longer in DB
by Shehzad Hamid 12 Sep '18

12 Sep '18

Greetings, A little background, ive installed ASL on intel Atom with the modified usb FOB cm108 and an HT for RF on 144MHz, have echolink enabled and all connections from echolink and allstar in and out establish perfectly, configured the port forwarding on the router and all worked well. The bigger plan is to putup at least 3 nodes in Pakistan linking 3 city coverage repeaters together in future while having the facility of world being connected to us or vise versa :D. The issue in subject line has been posted many times before and I have gone through almost all of them for the past 3+ days now but to no avail. The node does not show up in the online nodes list nor on http://status.allstarlink.org/nodeinfo.cgi?node=48092 where as it does showup green in system-wide node list, the iax2 show registry shows allstarlink1*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 48092 39.50.88.107:10880 60 Registered have checked all possible network settings and no change from the first day it went online. repeater@allstarlink1:~$ sudo cat /tmp/rpt_extnodes-temp | grep 48092 48092=radio@39.50.88.107:4569/48092,39.50.88.107 repeater@allstarlink1:~$ sudo grep 48092 /var/lib/asterisk/rpt_extnodes 48092=radio@39.50.88.107:4569/48092,39.50.88.107 ran tcpdump on the allstarnode and I can see the packets being sent and acknowledged (below). 14:22:47.299321 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [S], seq 1388935083, win 29200, options [mss 1460,sackOK,TS val 1223790 ecr 0,nop,wscale 7], length 0 14:22:47.303605 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [S], seq 2416777296, win 29200, options [mss 1460,sackOK,TS val 1223791 ecr 0,nop,wscale 7], length 0 14:22:47.625331 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [S.], seq 953265040, ack 1388935084, win 28960, options [mss 1452,sackOK,TS val 914084267 ecr 1223790,nop,wscale 7], length 0 14:22:47.625451 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [.], ack 1, win 229, options [nop,nop,TS val 1223872 ecr 914084267], length 0 14:22:47.625642 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [P.], seq 1:316, ack 1, win 229, options [nop,nop,TS val 1223872 ecr 914084267], length 315: HTTP: GET /uhandler.php?node=48092&time=1529313767&seqno=107&nodes=&apprptvers=0.327&apprptuptime=1875&totalkerchunks=0&totalkeyups=5&totaltxtime=33&timeouts=0&totalexecdcommands=1 HTTP/1.1 14:22:47.632208 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [S.], seq 1293069211, ack 2416777297, win 28960, options [mss 1452,sackOK,TS val 914084267 ecr 1223791,nop,wscale 7], length 0 14:22:47.632359 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [.], ack 1, win 229, options [nop,nop,TS val 1223873 ecr 914084267], length 0 14:22:47.632735 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [P.], seq 1:217, ack 1, win 229, options [nop,nop,TS val 1223873 ecr 914084267], length 216: HTTP: GET /uhandler.php?node=48092&time=1529313767&seqno=108&keyed=0&keytime=1885 HTTP/1.1 14:22:47.953808 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [.], ack 316, win 235, options [nop,nop,TS val 914084349 ecr 1223872], length 0 14:22:47.958200 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [P.], seq 1:208, ack 316, win 235, options [nop,nop,TS val 914084350 ecr 1223872], length 207: HTTP: HTTP/1.1 200 OK 14:22:47.958288 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [.], ack 208, win 237, options [nop,nop,TS val 1223955 ecr 914084350], length 0 14:22:47.960295 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [F.], seq 316, ack 208, win 237, options [nop,nop,TS val 1223955 ecr 914084350], length 0 14:22:47.962823 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [.], ack 217, win 235, options [nop,nop,TS val 914084350 ecr 1223873], length 0 14:22:47.966204 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [P.], seq 1:208, ack 217, win 235, options [nop,nop,TS val 914084351 ecr 1223873], length 207: HTTP: HTTP/1.1 200 OK 14:22:47.966263 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [.], ack 208, win 237, options [nop,nop,TS val 1223957 ecr 914084351], length 0 14:22:47.968871 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [F.], seq 217, ack 208, win 237, options [nop,nop,TS val 1223957 ecr 914084351], length 0 14:22:48.284755 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [F.], seq 208, ack 317, win 235, options [nop,nop,TS val 914084432 ecr 1223955], length 0 14:22:48.284887 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [.], ack 209, win 237, options [nop,nop,TS val 1224037 ecr 914084432], length 0 14:22:48.296156 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [F.], seq 208, ack 218, win 235, options [nop,nop,TS val 914084433 ecr 1223957], length 0 14:22:48.296248 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [.], ack 209, win 237, options [nop,nop,TS val 1224039 ecr 914084433], length 0 Please advise -- 73's Shehzad AP2CJ

4 10

duplex=0 bug?
by Stephen - K1LNX 03 Sep '18

03 Sep '18

Hi guys, I recently re-built the node that interfaces to my controller, and one of the things I noticed after re-building it that there was a fairly long hang time, anywhere from 5-10 seconds. I have the following set, and unless I'm misinterpreting how this is expected to work, could this be a potential bug? duplex = 0 ;0 = Half duplex with no telemetry tones or hang time. linktolink = yes ; disables forcing physical half-duplex operation of main repeater while ; still keeping half-duplex semantics (optional) I am still testing, but setting the the hang time to "0" appears to have fixed it, I also tried setting other params to "0" in the wait-times section: hangtime = 0 ; squelch tail hang time (in ms) (optional, default 5 seconds, 5000 ms) althangtime = 0 ; longer squelch tail [wait-times] telemwait = 0 ; Time to wait before sending most telemetry idwait = 500 ; Time to wait before starting ID unkeywait = 0 ; Time to wait after unkey before sending CT's and link telemetry calltermwait = 0 ; Time to wait before announcing "call terminated" Anyone else run into this, or is this working as expected? Hardware is a Raspberry Pi 3 B+ and Repeater Builder RIM "lite" SCOM interface. 73 Stephen K1LNX

2 2

Power Point
by John Wagner 02 Sep '18

02 Sep '18

Hi David - Here's a slide deck I did for our club that you're welcome to use. This is a couple years old so it's a little dated, and probably has a lot more than you need, but maybe you can use parts of it. https://docs.google.com/presentation/d/1lvr3acd16nWjUXIuiOpyRaTF7XzMrF4gfhR… I'm pretty sure that link should work for anyone that can use it. - John, N8CD [App_rpt-users] Power Point > Date: Wed, 29 Aug 2018 11:31:12 -0700 > From: David Shaw <shawpbx(a)gmail.com> > To: APP RPT <app_rpt-users(a)lists.allstarlink.org> > Subject: [App_rpt-users] Power Point > Message-ID: > <CAH4RvbJhjiAtTC49c9yzVA7YGPYo8aFujRuTrU6= > BC+tzpDfHg(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hello Everyone, I wanted to ask the group if anyone has a power point I can > have on AllStarLink. The local club in my area is wanting to link the two > club repeaters and join ASL.. > > Any help would be great. > > > -- > Thanks, David > KE6UPI > >

3 2

System seems to connect to other allstar nodes but can't connect to its self.
by Loren Tedford 31 Aug '18

31 Aug '18

I have been struggling with an issue on this new installation where allstar can't connect to a node on its own self.. I can't figure this out no matter what i have tried.. Here is the topology of the system. We have a vpn connection that starts on boot so that way we have full access to the systems from our local servers.. The reason we vpn this is because we go out across Verizon 4G LTE network then come back into our servers systems. Here is what ip addr spits out. root@debian:~# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 04:8d:38:3d:b6:f4 brd ff:ff:ff:ff:ff:ff 3: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:22:4d:7c:5f:94 brd ff:ff:ff:ff:ff:ff inet 192.168.1.2/24 brd 192.168.1.255 scope global enp1s0 valid_lft forever preferred_lft forever inet6 2600:1008:b04c:ca22:222:4dff:fe7c:5f94/64 scope global mngtmpaddr dynamic valid_lft 86382sec preferred_lft 14382sec inet6 fe80::222:4dff:fe7c:5f94/64 scope link valid_lft forever preferred_lft forever 4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 100 link/none inet 192.168.8.162 peer 192.168.8.161/32 scope global tun0 valid_lft forever preferred_lft forever inet6 fe80::fe4d:c773:1afa:cead/64 scope link flags 800 valid_lft forever preferred_lft forever root@debian:~# Here is what iax2 show registry says. AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version 004b9dd Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others. Created by Mark Spencer <markster(a)digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk GIT Version 004b9dd currently running on debian (pid = 352) debian*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 40875 157.185.79.38:5469 60 Registered 44.98.254.145:4569 Y 29925 157.185.79.38:5469 60 Registered debian*CLI> Keep in mind for some reason local host doesn't seem to work at all.. And it confuses me.. Here is Extensions.conf root@debian:/etc/asterisk# cat extensions.conf [general] static=yes ; These two lines prevent the command-line interface writeprotect=yes ; from overwriting the config file. Leave them here. [globals] [default] exten => i,1,Hangup [radio-secure] exten => 29925,1,rpt,29925 exten => 40875,1,rpt,40875 [radio-secure-proxy] exten => 29925,1,rpt,29925|X exten => 40875,1,rpt,40875|X exten => _0X.,1,Goto(allstar-sys|${EXTEN:1}|1) [pstn-out] exten=_NXXNXXXXXX,1,Dial(IAX2/allstar-autopatch/${EXTEN}) exten=_NXXNXXXXXX,2,Busy [invalidnum] exten=s,1,Wait,3 exten=s,n,Playback,ss-noservice exten=s,n,Wait,1 exten=s,n,Hangup [radio] exten=_X11,1,Goto(check_route|${EXTEN}|1); exten=_NXXXXXX,1,Goto(check_route|1${HOMENPA}${EXTEN}|1) exten=_1XXXXXXXXXX,1,Goto(check_route|${EXTEN}|1) exten=_07XX,1,Goto(parkedcalls|${EXTEN:1}|1) exten=00,1,Goto(my-ip|s|1) [check_route] ; no 800 exten=_1800NXXXXXX,2,Goto(invalidnum|s|1) exten=_1888NXXXXXX,2,Goto(invalidnum|s|1) exten=_1877NXXXXXX,2,Goto(invalidnum|s|1) exten=_1866NXXXXXX,2,Goto(invalidnum|s|1) exten=_1855NXXXXXX,2,Goto(invalidnum|s|1) ; no X00 NPA exten=_1X00XXXXXXX,2,Goto(invalidnum|s|1) ; no X11 NPA exten=_1X11XXXXXXX,2,Goto(invalidnum|s|1) ; no X11 exten=_X11,2,Goto(invalidnum|s|1) ; no 555 Prefix in any NPA exten=_1NXX555XXXX,2,Goto(invalidnum|s|1) ; no 976 Prefix in any NPA exten=_1NXX976XXXX,2,Goto(invalidnum|s|1) ; no NPA=809 exten=_1809XXXXXXX,2,Goto(invalidnum|s|1) ; no NPA=900 exten=_1900XXXXXXX,2,Goto(invalidnum|s|1) ; okay, route it exten=_1NXXXXXXXXX,1,Goto(pstn-out|${EXTEN:1}|1) exten=_X.,2,Goto(invalidnum|s|1) [my-ip] exten=s,1,Set(MYADDR=${CURL(http://myip.vg)}) exten=s,2,Wait,1 exten=s,3,SayAlpha(${MYADDR}) exten=s,4,Hangup [allstar-sys] exten => 0,1,Answer exten => 0,n,System(rm -rf /tmp/allstar-config\; mkdir -p /tmp/allstar-config\;curl -sk -m 20 --retry 1 https://config.allstarlink.org/config/start.sh > /tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh ${CALLERID(name)}) exten => 0,n,Hangup exten => _0.,1,Answer exten => _0.,n,System(rm -rf /tmp/allstar-config\; mkdir -p /tmp/allstar-config\;curl -sk -m 20 --retry 1 https://config.allstarlink.org/config/start.sh > /tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh ${CALLERID(name)}) exten => _0.,n,Hangup exten => _1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) exten => _1.,n,Hangup exten => _2.,1,Ringing exten => _2.,n,Wait(3) exten => _2.,n,Answer exten => _2.,n,Playback(rpt/node) exten => _2.,n,Saydigits(${EXTEN:1}) exten => _2.,n,Rpt(${EXTEN:1}|P|${CALLERID(name)}-P) exten => _2.,n,Hangup exten => _3.,1,Ringing exten => _3.,n,Wait(3) exten => _3.,n,Answer exten => _3.,n,Playback(rpt/node) exten => _3.,n,Saydigits(${EXTEN:1}) exten => _3.,n,Rpt(${EXTEN:1}|Pv|${CALLERID(name)}-P) exten => _3.,n,Hangup exten => _4.,1,Ringing exten => _4.,n,Wait(3) exten => _4.,n,Answer exten => _4.,n,Playback(rpt/node) exten => _4.,n,Saydigits(${EXTEN:1}) exten => _4.,n,Rpt(${EXTEN:1}|D|${CALLERID(name)}-P) exten => _4.,n,Hangup exten => _5.,1,Ringing exten => _5.,n,Wait(3) exten => _5.,n,Answer exten => _5.,n,Playback(rpt/node) exten => _5.,n,Saydigits(${EXTEN:1}) exten => _5.,n,Rpt(${EXTEN:1}|Dv|${CALLERID(name)}-P) exten => _5.,n,Hangup [allstar-public] exten => s,1,Ringing exten => s,n,Set(RESP=${CURL(https://register.allstarlink.org/cgi-bin/authwebphone.p… exten => s,n,Set(NODENUM=${CALLERID(number)}) exten => s,n,GotoIf($["${RESP:0:1}" = "?"]?hangit) exten => s,n,GotoIf($["${RESP:0:1}" = ""]?hangit) exten => s,n,GotoIf($["${RESP:0:5}" != "OHYES"]?hangit) exten => s,n,Set(CALLSIGN=${RESP:5}) exten => s,n,Wait(3) exten => s,n,Playback(rpt/node|noanswer) exten => s,n,Saydigits(${NODENUM}) exten => s,n,Set(CALLERID(num)=0) exten => s,n,Set(CALLERID(name)=${CALLSIGN}) exten => s,n,Rpt(${NODENUM}|X) exten => s,n,Hangup exten => s,n(hangit),Answer exten => s,n(hangit),Wait(1) exten => s,n(hangit),Hangup exten => 9999,1,Goto(allstar-public|s|1) #includeifexists custom/extensions.conf [to-callcentric] exten => _X.,1,Dial(SIP/${EXTEN}@callcentric) root@debian:/etc/asterisk# Here is iax.conf root@debian:/etc/asterisk# cat iax.conf [general] bindport=5469 bindaddr=0.0.0.0 disallow=all allow=gsm allow=g726aal2 allow=ulaw jitterbuffer=yes forcejitterbuffer=yes dropcount=2 maxjitterbuffer=4000 maxjitterinterps=10 resyncthreshold=1000 maxexcessbuffer=80 minexcessbuffer=10 jittershrinkrate=1 autokill=yes delayreject=yes ;iaxthreadcount=30 ;iaxmaxthreadcount=150 register=29925:PASSWORD@register.allstarlink.org register=40875:PASSWORD@register.allstarlink.org [allstar-autopatch] type=peer host=register.allstarlink.org username=29925 secret=592463 auth=md5 disallow=all allow=gsm ;allow=ulaw transfer=no [radio-proxy] type=user deny=0.0.0.0/0.0.0.0 permit=/255.255.255.255 context=radio-secure-proxy disallow=all allow=g726aal2 transfer=no [radio-proxy-out] type=peer host= username=42447 secret=800129 auth=md5 disallow=all allow=g726aal2 transfer=no ; Incoming radio connections [radio] type=user disallow=all allow=g726aal2 allow=gsm codecpriority=host context=radio-secure transfer=no ; Incoming phone connections to app_rpt ;[radio-control] ;type=user ;secret=nunya ;disallow=all ;allow=gsm ;codecpriority=host ;context=radio-control ;transfer=no ; Setup for outgoing calls ;[yourprovider] ; This needs to change ;type=peer ;host=127.0.0.1 ;secret=nunya ;auth=md5 ;disallow=all ;allow=gsm ;transfer=no [allstar-sys] type=user context=allstar-sys auth=rsa inkeys=allstar disallow=all allow=gsm allow=ulaw [allstar-public] type=user context=allstar-public auth=md5 secret=allstar disallow=all allow=gsm allow=ulaw #includeifexists custom/iax.conf root@debian:/etc/asterisk# Here is what rpt.conf file says. root@debian:/etc/asterisk# cat rpt.conf ; Radio Repeater configuration file (for use with app_rpt) ; ; ; Your Repeater ; [29925] ; Change this to your assigned node number rxchannel = SimpleUSB/usb29925 duplex = 2 erxgain = -3 etxgain = 3 ;controlstates=controlstates scheduler = schedule29925 macro = macro startup_macro=*95341715 morse = morse29925 macro = macro29925 functions = functions29925 phone_functions = functions29925 link_functions = functions29925 telemetry = telemetry wait_times = wait-times context = radio callerid = "Repeater" <0000000000> idrecording = /etc/asterisk/ids/kc9zhvrpt idrecording = |iKC9ZHV accountcode = RADIO hangtime = 0 althangtime = 10 totime = 210000 idtime = 540000 politeid = 3000 idtalkover = |iKC9ZHV unlinkedct = ct88 remotect = ct88 linkunkeyct = ct88 ;remotetx=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL ;remotemon=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL ;cmdmode=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) ;nolocallinkct=0 ;eannmode=1 ;connpgm=yourconnectprogram ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct = 0 ;holdofftelem=0 beaconing = 0 telemdefault = 2 ;archivedir=/etc/asterisk/audio ; ; *** Status Reporting *** ; ; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org ; depending on whether you are running ACID or Limey Linux. ; ** For ACID *** statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ; ** For Limey Linux ** ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ; ; Morse code parameters, these are common to all repeaters. ; [morse29925] speed=20 frequency=800 amplitude=4096 idfrequency=750 idamplitude=1024 [schedule29925] ;dtmf_function = m h dom mon dow ; ala cron, star is implied [functions29925] 1=ilink,1 2=ilink,2 3=ilink,3 4=ilink,4 5=macro,1 70=ilink,5 71=ilink,6 72=ilink,7 73=ilink,15 74=ilink,16 75=ilink,8 951=ilink,11 ; Permanent link disconnect ;952=ilink,12 ; Permanent link receive 953=ilink,13 ; Permanent link transceive 80=status,1 81=status,2 ;6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up ;0=autopatchdn ; Autopatch down 6=autopatchup,context=to-callcentric,noct=1,farenddisconnect=1,dialtime=20000 0=autopatchdn ; Autopatch down ;989=cop,4 980=status,3 99=cop,6 ; Place command macros here [macro29925] ;2= *81 [40875] ; Change this to your assigned node number rxchannel = SimpleUSB/usb40875 duplex = 2 erxgain = -3 etxgain = 3 ;controlstates=controlstates scheduler = schedule40875 macro = macro startup_macro=*95342448 morse = morse40875 macro = macro40875 functions=functions40875 phone_functions=functions40875 link_functions=functions40875 telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = /etc/asterisk/ids/kc9zhvrpt idrecording = |iKC9ZHV/R accountcode = RADIO hangtime=10 althangtime=20 totime=210000 idtime=540000 politeid=3000 idtalkover=|iKC9ZHV/R unlinkedct=ct89 remotect=ct89 linkunkeyct=ct89 ;remotetx=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;remotemon=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;cmdmode=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;functcomplete=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;nolocallinkct=0 ;eannmode=1 ;connpgm=yourconnectprogram ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=0 ;holdofftelem=0 beaconing=0 telemdefault=2 ;archivedir=/etc/asterisk/audio ; ; *** Status Reporting *** ; ; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org ; depending on whether you are running ACID or Limey Linux. ; ** For ACID *** statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ; ** For Limey Linux ** ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ; ; Morse code parameters, these are common to all repeaters. ; [morse40875] speed=20 frequency=800 amplitude=4096 idfrequency=750 idamplitude=1024 [schedule40875] ;dtmf_function = m h dom mon dow ; ala cron, star is implied [functions40875] 1=ilink,1 2=ilink,2 3=ilink,3 4=ilink,4 5=macro,1 70=ilink,5 71=ilink,6 72=ilink,7 73=ilink,15 74=ilink,16 75=ilink,8 951=ilink,11 ; Permanent link disconnect ;952=ilink,12 ; Permanent link receive 953=ilink,13 ; Permanent link transceive 80=status,1 81=status,2 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn ; Autopatch down ;989=cop,4 980=status,3 99=cop,6 ; Place command macros here [macro40875] ;[telemetry] ;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ;ct2=|t(660,880,150,2048) ;ct3=|t(440,0,150,4096) ;ct4=|t(550,0,150,2048) ;ct5=|t(660,0,150,2048) ;ct6=|t(880,0,150,2048) ;ct7=|t(660,440,150,2048) ;ct8=|t(700,1100,150,2048) ;ct88=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL ;ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;NaSA beep ;ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;remotetx=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;remotemon=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;cmdmode=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;functcomplete=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ; ; Nextel tones setup ;remotetx=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL ;remotemon=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL ;cmdmode=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) ;Unknown settings below.. ;unlinkedct=ct1 ; local off-link tone ;remotect=ct3 ; remote base connected tone ;linkunkeyct=ct8 ; remote on-link tone ;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000); ;remotemon=|t(1209,0,50,2048) ;cmdmode=|t(900,903,200,2048) ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) ;patchup=rpt/callproceeding ;patchdown=rpt/callterminated [telemetry] ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ct2=|t(660,880,150,2048) ct3=|t(440,0,150,4096) ct4=|t(550,0,150,2048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ;ct8=|t(700,1100,150,2048) ct88=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;NaSA beep ;ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;remotetx=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;remotemon=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;cmdmode=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ;functcomplete=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1 ; ; Nextel tones setup remotetx=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL remotemon=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL cmdmode=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048) ; NEXTEL functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) ;Unknown settings below.. ;unlinkedct=ct1 ; local off-link tone ;remotect=ct3 ; remote base connected tone ;linkunkeyct=ct8 ; remote on-link tone ;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000); ;remotemon=|t(1209,0,50,2048) ;cmdmode=|t(900,903,200,2048) ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) patchup=rpt/callproceeding patchdown=rpt/callterminated ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times] telemwait=2000 idwait=500 unkeywait=2000 calltermwait=2000 ; ; This is where you define your nodes which cam be connected to. ; [nodes] ; Note, if you are using automatic update for allstar link nodes, ; no allstar link nodes should be defined here. Only place a definition ; for your locak nodes, and private (off of allstar link) nodes here. 29925 = radio(a)127.0.0.1/29925,NONE 40875 = radio(a)127.0.0.1/40875,NONE 29925 = radio@192.168.1.50:4569/29925,NONE 40875 = radio@192.168.1.50:4569/40875,NONE ; Memories for remote bases [memory] ;00 = 146.580,100.0,m ;01 = 147.030,103.5,m+t ;02 = 147.240,103.5,m+t ;03 = 147.765,79.7,m-t ;04 = 146.460,100.0,m ;05 = 146.550,100.0,m #includeifexists custom/rpt.conf root@debian:/etc/asterisk# Above i did try to set at one point in time a static ip and force it to go back around however didn't work either.. Anythoughts on this?? root@debian:/etc/asterisk# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback iface enp1s0 inet loopback # The primary network interface allow-hotplug enp1s0 iface enp1s0 inet dhcp root@debian:/etc/asterisk# What did i miss? I even turned firewalls off thinking that might have been the issue for not allowing the two nodes to connect together on the same system.

4 5

Re: [App_rpt-users] Delivery Status Notification (Failure)
by Loren Tedford 31 Aug '18

31 Aug '18

On 8/31/2018 1:17 PM, Mail Delivery Subsystem wrote: > Error Icon > > > Message not delivered > > There was a problem delivering your message to *bryan(a)k6cbr.us*. See > the technical details below. > LEARN MORE <https://support.google.com/a/answer/168383> > > The response was: > > Your email to group bryan(a)k6cbr.us was rejected due to spam > classification. The owner of the group can choose to enable message > moderation instead of bouncing these emails. More information can be > found here: https://support.google.com/a/answer/168383. > > > > Reporting-MTA: dns; googlemail.com > Received-From-MTA: dns; loren(a)lorentedford.com > Arrival-Date: Fri, 31 Aug 2018 11:17:45 -0700 (PDT) > X-Original-Message-ID: <747bed01-e993-ceac-3afb-341fe799c735(a)lorentedford.com> > > Final-Recipient: rfc822; bryan(a)k6cbr.us > Action: failed > Status: 5.0.0 > Diagnostic-Code: smtp; Your email to group bryan(a)k6cbr.us was rejected due to spam classification. > The owner of the group can choose to enable message moderation instead of bouncing these emails. > More information can be found here: https://support.google.com/a/answer/168383. > Last-Attempt-Date: Fri, 31 Aug 2018 11:17:45 -0700 (PDT)

1 0

Phone Portal/Web Transceiver access
by kc8qch＠gmail.com 29 Aug '18

29 Aug '18

Hi all, Is there a way to disable web transceiver/phone portal access? The question was brought to me and I didn't know if it was possible or not. Thanks. Jeff Jeff Lehman, KC8QCH Email: kc8qch(a)gmail.com <mailto:kc8qch@gmail.com> Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org Email: hamcoarpsc(a)gmail.com Allstar Node 47374 Administrator The Guild/IRN http://theguildglobal.org

2 4

Power Point
by David Shaw 29 Aug '18

29 Aug '18

Hello Everyone, I wanted to ask the group if anyone has a power point I can have on AllStarLink. The local club in my area is wanting to link the two club repeaters and join ASL.. Any help would be great. -- Thanks, David KE6UPI

1 0

rxctcssdecode = -1
by K. Ishikawa 28 Aug '18

28 Aug '18

Hi to the group, When I set "radio set debug" in CLI, the screen is inundated with a flow the following message. It keeps printing the same message so fast that I can't catch other debug messages. Can anyone advise how I can eliminate this, please? [Aug 28 18:32:39] NOTICE[3013]: chan_usbradio.c:2913 usbradio_read: rxctcssdecode = -1, chan Radio/usb_2132 The node itself is working well, as far as I can tell. It's on R-Pi 3 with URI. Thanks, K -- JI1BQW - #2132

3 5

rxctcssdecode = -1
by K. Ishikawa 28 Aug '18

28 Aug '18

(Let me go again as the format was broken in the previous post.) Hi to the group, When I set "radio set debug" in CLI, the screen is inundated with a flow the following message. It keeps printing the same message so fast that I can't catch other debug messages. Can anyone advise how I can eliminate this, please? [Aug 28 18:32:39] NOTICE[3013]: chan_usbradio.c:2913 usbradio_read: rxctcssdecode = -1, chan Radio/usb_2132 The node itself is working well, as far as I can tell. It's on R-Pi 3 with URI. Thanks, K -- JI1BQW - #2132

1 0

Cannot get node to execute commands via CLI
by TGundo 2003 26 Aug '18

26 Aug '18

I had my node working and was able to connect to another node about a week ago using the CLI interface in asterisk. Since then the things I have changed: -Configured iax client so I can monitor with iaxrpt on my PC. -Removed ID's the and hang times from the rpt.conf file. Not much else than that. If I go to radio-tune-menu and enable echo mode I hear myself back. I show online on the node list. I'm really thinking I may have messed something up when I configured for the iax client. Any suggestions? Thanks! TomW9SRV

1 0