May 2021 - App_rpt-users - lists.keekles.org

Allmon2
by ARS W5OMR 30 Sep '21

30 Sep '21

So, I followed the instructions at https://wiki.allstarlink.org/wiki/Allmon2_Install Got it all done, and tried to open up, in my local browser, 192.168.x.x/allmon2 (correct address inserted) and I get the error code of "Resource Not Found" allmon.ini.php root@repeater:/var/www/html/allmon2# less allmon.ini.php <?php [Off-site Link] url=http://google.com [29655] host=my.127.0.0.1:5038 user=admin passwd=llcgi nomenu=yes hideNodeURL=yes ;[501] ;system=System1 ;host=192.168.0.3:5038 ;user=admin ;passwd=password2 ;nomenu=yes ;hideNodeURL=yes ;[502] ;system=System1 ;host=my.address.com:5038 ;user=admin ;passwd=password2 ;nomenu=yes ;hideNodeURL=yes ;[2000] ;system=System2 ;host=my.address.com:5037 ;user=admin ;passwd=password2 ;[2000 RTCM] ;system=System2 ;rtcmnode=2000 ;[Grouped Nodes] ;nodes=500,501,2000 ;[2 RTCMs] ;system=System2 ;rtcmnode=2000,2001 ?> (END) After reading the README file, I see that Apache needs to be installed and running. Is there enough room on my RPI3b's SD card for apache? root@repeater:# df -h Filesystem Size Used Avail Use% Mounted on /dev/root 30G 2.4G 26G 9% / devtmpfs 459M 0 459M 0% /dev tmpfs 463M 0 463M 0% /dev/shm tmpfs 463M 47M 417M 11% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 463M 0 463M 0% /sys/fs/cgroup /dev/mmcblk0p1 99M 20M 79M 20% /boot log2ram 40M 40M 0 100% /var/log yeah... looks like. So, I'm guessing that's my next step? Thoughts? -- 73 = Best Regards, -Geoff/W5OMR (29655)

2 1

ID without PL?
by Kyle Y 30 May '21

30 May '21

Hello all, Is anyone on the list sending their ID without PL? I've got a GPIO wired up for the purpose but don't see an easy way to drop that in. I'd appreciate any suggestions. Thanks. 73 Kyle K0KN

1 0

Voter boards and PICs still available
by Joe Moskalski 04 May '21

04 May '21

Just letting anyone who is interested know, I still have the VOTER board PCB's and pre-programmed PIC microcontrollers for them still available from the last batch I ordered. I also have my own version of the PCGM available as well. If anyone is interested, please let me know. -Joe KC2IRV P.S Also, to all those who did purchase these from me, I haven't heard any feedback, I hope everyone was happy with what they received.

1 0