January 2018 - App_rpt-users - lists.keekles.org

DIAL Install from git fails
by Dan Srebnick 01 Feb '18

01 Feb '18

Hi: I've built a fresh Debian amd64 OS, ver 9.3.0. I'm attempting to build an Allstar system using https://github.com/AllStarLink/DIAL and the install script as documented in the README.md file. My installation is dying during the dependency check for menuselect.makeopts. The error complains about app_dahdiras not being included but other modules being dependent upon it. I'm open to suggestion. 73, Dan K2DLS

2 3

CM108 dongles
by ARS W5OMR 31 Jan '18

31 Jan '18

I found these... https://www.banggood.com/Free-Drive-USB-Sound-Card-Notebook-Computer-Extern… >From the pictures, it seems that the chip is not potted. There's 8 left. What I need now, is good info on connecting one of these to a Baoufang UV-82 Main Trading Company, in Paris Texas has 500 of them to blow out at $25.95 per. We received 500 pieces of these UV-82 Dual Band Baofengs. They are labeled as a UV-82DX 7 watt radio. They are mislabeled. This is a plain UV-82 5 Watt Radio, They are labeled as UV-82DX 7 watt radio. We are blowing them out. Save big BaoFeng UV-82 Dual-Band 136-174/400-520 MHz FM Ham Two-way Radio, Transceiver, HT - With Battery, Antenna, and Charger - Frequency Range: 65-108 MHz(Only commercial FM radio reception) VHF: 136-174 MHz(Rx/Tx). UHF: 400-520 MHz(Rx/Tx), Broad (Wide) / Narrowband (Narrow), High power / low (5W/1W), selectable. - Selectable Frequency Step/2.5/5/6.25/10/12.5/25 kHz, Function "VOX" (Voice Operated Transmission), "OFFSET" (frequency offset for repeater access). - Dual-band handheld transceiver with display function menu on the display "LCD". Function Busy Channel Lock "BCLO". - Find Helpful BaoFeng Guides at Miklor <http://r20.rs6.net/tn.jsp?f=001Hv7pmxjCHGbEJKEJntIS22BSiSEwMRxOBJAlXzB-sFa6…> Product Features: 25KHz/12.5KHz Switchable (Wide / Narrow Band FM Radio (65.0MHz-108.0MHz) LED Flashlight:Hight /Low Transmit Power Selectable (1W / 5W) 50 CTCSS/ 104 DTCS Codes Tone searching Dual standby / Dual Watch PC programmable Transmitter time-out timer(TOT) Busy channel lock-out(BCLO) Specification: General Frequency Range: 65-108MHz(FM Receive only),136-174MHZ and 400-520MHZ (TX/RX) Programmable Channels: 128 Antenna: High gain Dual Band Antenna Operating Voltage: DC 7.4V Modes : Simple or semi-duplex Antenna: SMA -Female Power adapter: Input: AC100-240V, 50-60Hz; Output: DC10V/500mA; Plug Type: US Maximum deviation: 5kHz(Wide) / 2.5kHz(Narrow) CTCSS/DCS deviation: 0.5±0.1kHz(Wide) / 0.3±0.1kHz(Narrow) Package included: UV-82 Radio 7.4V/1800mAh BL-8 Battery Antenna Battery Charger and Power Adapter Belt Clip Hand Strap User Manual -- 73 = Best Regards, -Geoff/W5OMR

5 4

Re: [App_rpt-users] cw id with two nodes on server
by ars.w5omr＠gmail.com 30 Jan '18

30 Jan '18

I ran into that years ago. There's only one stanza on a machine in rpt.conf for all nodes on that machine, as far as the CW ID is concerned. You 'can' define a voice ID on the 'other' node and have it default to CW when in 'polite' mode, but it will revert to whatever is in the CW ID stanza. 73 = Best Regards Geoff/W5OMR (29655/56/57) On Jan 30, 2018 04:18, Bryan Fields <bryan(a)bryanfields.net> wrote: > > > > On Jan 30, 2018, at 00:12, STAN SIEMS <ssiems(a)mycns.net> wrote: > >> I am running 2 nodes 1994 and 1996 on this server with programed as below cw Id is good on mode 1996 not good on 1994 if I change the node number [morse1996] to [morse1994] the problem reverses to the other node.Does this file need to be duplicated for both nodes? >> >> ; Morse code parameters, these are common to all repeaters. >> ; >> [morse1996] >> >> speed=20 >> frequency=800 >> amplitude=4096 >> idfrequency=750 >> idamplitude=1024 > > > How is your node configured? You need to reference the Morse stanza in both node stanzas. > > > 73 > -- > Bryan Fields > M: +1-727-409-1194 > > >

3 3

cw id with two nodes on server
by STAN SIEMS 30 Jan '18

30 Jan '18

I am running 2 nodes 1994 and 1996 on this server with programed as below cw Id is good on mode 1996 not good on 1994 if I change the node number [morse1996] to [morse1994] the problem reverses to the other node.Does this file need to be duplicated for both nodes? ; Morse code parameters, these are common to all repeaters. ; [morse1996] speed=20 frequency=800 amplitude=4096 idfrequency=750 idamplitude=1024 -- Thanks Stan Siems WB0EMJ The difficult we do right away the impossible just takes a little longer and the words it can't be done should never be spoken

3 2

Re: [App_rpt-users] Allstar Google Maps of Nodes
by thorn＠myactv.net 29 Jan '18

29 Jan '18

4 3

Allstar Google Maps of Nodes
by Greg Thornwall 29 Jan '18

29 Jan '18

I added a Google map of Allstar nodes to the Allstar stats website. http://stats.allstarlink.org/maps/ There is also a link on the main status page. 73 Greg KD3SU

4 5

Re: [App_rpt-users] Allstar Google Maps of Nodes
by thorn＠myactv.net 29 Jan '18

29 Jan '18

3 2

Allmon control function *74 question for Tim
by larry 29 Jan '18

29 Jan '18

Tim, Using Allmon2, In the canned control window you have a function that says "Say time (the TT way)" What does/did that actually do? Since it is defined to use *74 (which is undefined). I was wondering what you had it configured to accomplish when you used it? Did you use it to broadcast the DTMF command to another radio/repeater?. Just curious Larry - N7FM

2 1

Weather broadcast
by George Csahanin 28 Jan '18

28 Jan '18

Anybody know where I can get just the weather.sh script I see the other group using? I got W2YMM's script(s) for ARN and ARRL news working but having the ability for WX info would be great. GeorgeC W2DB Crowley, TX Allstar 2360 441.35 Allstar 28599 927.1125 STXNet -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel PLEASE NOTE: Effective January 1, 2018 george(a)dyb.com will no longer function USE george(a)w2db.com

1 0

Short repeat of audio after unkey
by Bryan Taylor 27 Jan '18

27 Jan '18

Hopefully a simple question, setup a new node today, full duplex repeater, with full duplex in simpleusb.conf set to 1, duplex set to 2 in rpt.conf. 50sec Hangtime and courtesy tone as well. When someone keys up and says 123, Then Unkeys he hears himself say 3. Is this something fixable in software? Incorrect configuration maybe? Thanks Bryan Vo1mxz Sent from my iPhone > On Jan 22, 2018, at 12:16 PM, Loren Tedford <loren(a)lorentedford.com> wrote: > > Here is what i get from my repeater site > > root@rpt:~# dahdi_test -c 100 > Opened pseudo dahdi interface, measuring accuracy... > 99.996% 99.997% 99.991% 99.997% 99.998% 99.995% 99.998% 99.989% > 99.996% 99.995% 99.997% 99.996% 99.996% 99.998% 99.996% 99.999% > 99.995% 99.996% 99.996% 99.993% 99.996% 99.996% 99.996% 99.999% > 99.993% 99.997% 99.996% 99.996% 99.996% 99.996% 99.996% 99.996% > 99.995% 99.995% 99.987% 100.000% 99.993% 99.996% 99.997% 99.990% > 99.997% 99.995% 99.997% 99.997% 99.995% 99.998% 99.995% 99.996% > 99.997% 99.995% 99.999% 99.994% 99.995% 99.999% 99.995% 99.996% > 99.987% 99.996% 99.997% 99.995% 99.997% 99.995% 99.996% 99.997% > 99.994% 99.997% 99.998% 99.994% 99.997% 99.998% 99.999% 99.992% > 99.996% 99.998% 99.991% 99.997% 99.989% 99.996% 99.997% 99.996% > 99.997% 99.988% 99.997% 99.998% 99.994% 99.998% 99.995% 99.997% > 99.996% 99.996% 99.996% 99.995% 99.998% 99.996% 99.995% 99.996% > 99.995% 99.997% > --- Results after 98 passes --- > Best: 100.000% -- Worst: 99.987% -- Average: 99.995637% > Cummulative Accuracy (not per pass): 99.996 > root@rpt:~# > > > Here is what I get from the Data Center Hub.. Not yet aware of any issues but maybe i do have some thing going on too.. > > root@uhf:~# dahdi_test -c 100 > Opened pseudo dahdi interface, measuring accuracy... > 99.612% 99.607% 99.609% 99.612% 99.998% 99.994% 99.610% 99.607% > 100.000% 99.158% 99.152% 99.999% 100.000% 99.998% 98.729% 98.730% > 99.611% 99.608% 99.999% 99.994% 99.997% 99.996% 99.997% 100.000% > 99.999% 99.608% 99.994% 99.614% 99.994% 99.999% 99.616% 99.609% > 99.997% 99.993% 99.998% 99.998% 99.998% 99.617% 99.611% 99.611% > 99.998% 99.607% 99.994% 99.991% 99.998% 99.998% 99.997% 99.994% > 99.997% 99.615% 99.999% 99.607% 99.999% 99.997% 99.607% 99.994% > 99.604% 99.998% 99.998% 99.995% 99.997% 99.996% 99.999% 99.998% > 99.995% 99.992% 99.623% 99.609% 99.612% 99.611% 99.988% 99.628% > 99.612% 99.615% 99.612% 99.616% 99.613% 99.999% 99.995% 99.998% > 99.615% 99.612% 99.994% 100.000% 99.996% 98.104% 98.102% 99.999% > 99.591% 99.605% 99.980% 99.999% 100.000% 99.996% 99.999% 99.996% > 99.998% 99.998% > --- Results after 98 passes --- > Best: 100.000% -- Worst: 98.102% -- Average: 99.781178% > Cummulative Accuracy (not per pass): 99.998 > root@uhf:~# > > > I hope this helps. > > > Loren > > >> On 1/22/2018 7:36 AM, Pierre Martel wrote: >> dahdi_test -c 100 > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 1