June 2010 - App_rpt-users - lists.keekles.org

SheevaPlug
by Monty Dana 03 Jan '12

03 Jan '12

Anyone ever try to run app_rpt on the SheevaPlug <http://plugcomputer.org/>? -- Monty

4 3

Perminant links
by Scott Weis 30 Jun '10

30 Jun '10

Can someone define permanent links for me? Should permanent links be disconnected by ilink,6 (disconnect all links)? Thanks & 73, Scott KB2EAR

1 0

Port 4569 question - Multiple asterisk servers behind NAT ?
by Neil Addis (WA5JXY) 29 Jun '10

29 Jun '10

I searched the archives (& google) for an answer to this. I've tried everything I can on this end (other than replacing the router). Anyone else have any insight? I have two Asterisk servers running app_rpt, each with it's own node #. One of them I have default port forwarding 4569 to the pc ip. Everything works great! The other I set up with different ip, and used port forward (4563) to it's ip. I then set my iax.conf to append the non-standard port to the registration statement as follows; register=Anodenum:password:4563@register.allstarlink.org I then checked the /var/lib/asterisk/rpt_extnodes to see if my non-standard port is listed, but even after 24 hours it still shows 4569. I tried bindport=4563 to no avail. I also tried bindaddr=0.0.0.0:4563 I also tried bindaddr=192.168.1.106:4563 Is it a manual thing the allstarlink sysops have to do? Is it possible to have multiple asterisk pc's behind a single WAN ip - with port forwarding? Thanks! Neil

4 4

Disconnect non-perm links only
by Scott Weis 27 Jun '10

27 Jun '10

Is there a way to disconnect all and only non-permanent links? I have looked through the source and how-to's and found nothing but I wanted to check here before I put in a feature request. Thanks & 73, Scott KB2EAR

1 0

Connect announcements
by Paul M. Nannery 24 Jun '10

24 Jun '10

Has anyone gotten these settings to work ? irplann = 0 ; Default: 1 = Play irlp connect and disconnect announcements ; 0 = Disable irlp connect and disconnect announcements eannmode = 0 ; 0 = do not announce Echolink nodes at all, ; 1 = announce only the node number (Allstar-translated), ; 2 = announce only the call of the echolink station, ; 3 = announce both Paul M. Nannery Ham: KC2VRJ GMRS: WQBC441

4 3

Fw: Problems running Echolink
by Eric Meth - ve3ei 21 Jun '10

21 Jun '10

For some unknown reason this email did not show up on the list so I am sending it again. Eric Meth - ve3ei ----- Original Message ----- From: Eric Meth To: App_rpt-users(a)qrvc.com Sent: Sunday, June 20, 2010 10:27 PM Subject: Problems running Echolink I operate 3 app-rpt nodes, 2344, 2425 and 2579 Node 2344 has the following problem on echolink, from the /var/log/asterisk/messages log [Jun 20 19:16:07] NOTICE[11013] chan_echolink.c: Received OK from Echolink server server2.echolink.org [Jun 20 19:16:07] ERROR[11013] chan_echolink.c: Error in parsing header on server2.echolink.org [Jun 20 19:16:27] NOTICE[11013] chan_echolink.c: Received OK from Echolink server server3.echolink.org [Jun 20 19:16:27] ERROR[11013] chan_echolink.c: Error in parsing header on server3.echolink.org Anyone able help debug this problem? Eric Meth - ve3ei

2 1

PTT and delay
by Frank Herzog 21 Jun '10

21 Jun '10

Hi all, we have a problem with app_rpt together with chan_usbradio: Whenever PTT is released chan_usbradio prints out "TX OFF" with enabled debug output. Also chan_usbradio prints out " txPttIn = 0" immediately. But there elapses nearly 1 second up to the print out "txPttOut = 0" in the asterisk cli. How can we get rid of this delay? We do not use CTCSS, etc. Here the outpunt from the CLI: chan_usbradio ACRK dev=usb4 code=(null) TX ON [2010-06-21 16:49:12] NOTICE[7049]: chan_usbradio.c:2183 usbradio_read: txPttIn = 1, chan Radio/usb4 [2010-06-21 16:49:12] NOTICE[7049]: chan_usbradio.c:2200 usbradio_read: txPttOut = 1, chan Radio/usb4 [2010-06-21 16:49:12] NOTICE[7049]: chan_usbradio.c:2475 usbradio_read: dev=usb4 got b.txCtcssReady 88.5 chan_usbradio ACRUK dev=usb4 TX OFF >> [2010-06-21 16:49:14] NOTICE[7049]: chan_usbradio.c:2189 usbradio_read: txPttIn = 0, chan Radio/usb4 [2010-06-21 16:49:15] NOTICE[7049]: chan_usbradio.c:2200 usbradio_read: txPttOut = 0, chan Radio/usb4 [2010-06-21 16:49:15] NOTICE[7049]: chan_usbradio.c:2475 usbradio_read: dev=usb4 got b.txCtcssReady The attached radio is unkeyd after "txPttOut = 0" was printed out to the CLI with a delay of nearly one second after releasing the PTT-Button in the software. BR Frank **************************************** Dr.-Ing. Frank Herzog mailto:frank.herzog@dhp-gmbh.de PGP Fingerprint: D3EE B4D5 544C 7309 9D36 DFAD 5B6D C145 1409 E855 Tel: +49-241-990000-21 Fax: +49-241-990000-91 DOHMEN, HERZOG & Partner GmbH Soerser Weg 9 52070 Aachen Gesch?ftsf?hrende Gesellschafter Dr.-Ing. Marc Dohmen Dr.-Ing. Frank Herzog Amtsgericht Aachen HRB 5931 St.-Nr.: 201/5953/3633 USt-IdNr.: DE164205623 **************************************** Diese Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e- mail is strictly forbidden.

1 0

Re: [App_rpt-users] DTMF passthrough (silly question?)
by Anthony Percy 21 Jun '10

21 Jun '10

Hi Ken/Jim Thanks Ken for that parameter, thats exactly what we need!!! Jim, The repeater setup does use TX CTCSS to control the access to the IRLP/echolink node. To prevent the repeater ident been sent we don't send the TX CTCSS during the repeater ident time etc I know this is not ideal but you can guess what my next questions is... Can we turn off TX CTCSS during the app_rpt ident period or only on during real user activity??? regards Anthony VK2ACP PS. We got the dual allstar repeater setup working on saturday, just need to get the internet access fixed now.. On Mon, Jun 21, 2010 at 6:49 AM, Ken <ke2n(a)cs.com> wrote: > OK - spent some time poking around and found this > > http://app-rpt.qrvc.com/node/134 > > I think if you set it to yes - then the DTMF goes through > > GL > > Ken > > > -----Original Message----- > From: Ken <ke2n(a)cs.com> > To: anthcp(a)gmail.com > Sent: Thu, Jun 17, 2010 5:43 pm > Subject: Re: [App_rpt-users] DTMF passthrough (silly question?) > > There is a flag that stops the muting of the tones. Unfortunately I am > off on a business trip and cannot access my old mail database where I have > the name of that flag. In theory, if you look at the start of the "C" > source code for PMR (probably) it ought to be findable ... > 73 > Ken > > > -----Original Message----- > From: Anthony Percy <anthcp(a)gmail.com> > To: app_rpt-users(a)qrvc.com <app_rpt-users(a)qrvc.com> > Sent: Thu, Jun 17, 2010 2:18 pm > Subject: [App_rpt-users] DTMF passthrough (silly question?) > > > > > Hi Jim, > > Its a long story... > > We are setting up two allstar nodes at our club ( Chifley Amateur > > Radio Club) so we can link them together. But we have had a bit of a > > set back with our internet connection at the club shack so someone has > > setup the IRLP/Echolink server at his home using a 70cms radio to > > connect into the 70cms repeater. Hams can access IRLP/Echolink via the > > old repeater/controller without it being on the internet in this > > config. So they would like to to the same with the allstar repeaters > > but they need DTMF passthrough to be able to control the remote > > IRLP/Echolink box.... > > I hope this makes sense... > > > > regards > > > > Anthony VK2ACP > > > > On Wed, Jun 16, 2010 at 9:00 PM, Jim Duuuude <telesistant(a)hotmail.com> wrote: > > > > > > > > > > > > no. why would you want to do that? > > > > JIM > > > > Date: Wed, 16 Jun 2010 20:14:53 +1000 > > From: anthcp(a)gmail.com > > To: app_rpt-users(a)qrvc.com > > Subject: [App_rpt-users] DTMF passthrough (silly question?) > > > > Hi all, > > Does anyone know if its possible to allow DTMF tones to be heard on > > the app_rpt repeater? > > Currently all DTMF tones are "swallowed" by app_rpt (or more > > specifically chan_usbradio?) > > I have searched the asterisk docs where it talks about DTMF being > > terminated by the channel driver and then regenerated by asterisk but > > the "how to do this" alludes me so far! > > > > regards > > > > Anthony Percy VK2ACP > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)qrvc.com > > http://qrvc.com/mailman/listinfo/app_rpt-users > > > >

3 2

Anyone used the connpgm options?
by Buddy Brannan 20 Jun '10

20 Jun '10

Hi, I'm thinking that the way to handle things so the IRLP people don't get their knickers in a knot would be to disable connections after an IRLP reflector is connected. And I guess the best way to handle this would be with a shell script that executes on an outbound connection. So what I'm trying to determine is how to get at the values passed to your external program called with connpgm= [for instance, connpgm=/usr/local/bin/some-script ] Are the "us" and "them" values just passed off, so the script is called as /usr/local/bin/some-script 2331 3009999 Or am I completely misunderstanding this? [My misunderstanding this is not at all unlikely.] Thanks, -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY

1 0

DTMF passthrough (silly question?)
by Anthony Percy 17 Jun '10

17 Jun '10

Hi Jim, Its a long story... We are setting up two allstar nodes at our club ( Chifley Amateur Radio Club) so we can link them together. But we have had a bit of a set back with our internet connection at the club shack so someone has setup the IRLP/Echolink server at his home using a 70cms radio to connect into the 70cms repeater. Hams can access IRLP/Echolink via the old repeater/controller without it being on the internet in this config. So they would like to to the same with the allstar repeaters but they need DTMF passthrough to be able to control the remote IRLP/Echolink box.... I hope this makes sense... regards Anthony VK2ACP On Wed, Jun 16, 2010 at 9:00 PM, Jim Duuuude <telesistant(a)hotmail.com> wrote: no. why would you want to do that? JIM Date: Wed, 16 Jun 2010 20:14:53 +1000 From: anthcp(a)gmail.com To: app_rpt-users(a)qrvc.com Subject: [App_rpt-users] DTMF passthrough (silly question?) Hi all, Does anyone know if its possible to allow DTMF tones to be heard on the app_rpt repeater? Currently all DTMF tones are "swallowed" by app_rpt (or more specifically chan_usbradio?) I have searched the asterisk docs where it talks about DTMF being terminated by the channel driver and then regenerated by asterisk but the "how to do this" alludes me so far! regards Anthony Percy VK2ACP

1 0