November 2012 - App_rpt-users - lists.keekles.org

URI<>TKR-750 cable
by Jay Urish 06 Feb '15

06 Feb '15

Does anybody have notes on connecting tkr750 to a URI? TIA, W5GM

4 3

Registration issues
by Randy Ballard 07 Dec '13

07 Dec '13

My nodes 27365 and 27751 both on same server is showing on the status page but not showing in the rpt_extnodes on other nodes im using standard port 4569. we have been seeing this with several nodes in our group over past month or so of coarse if we define in the rpt file we can connect but would be nice if it was registering. sometimes it may show up in a few hours or a day generally a reboot and its gone again Thanks for any help in advance 73 Randy KB3HJC

5 9

ACID versus XIPAR
by Michael Hebert 18 Mar '13

18 Mar '13

What is the difference between ACID and XIPAR?

5 5

Fwd: Re: Allstar QSO Recording
by Keith Williamson 30 Jan '13

30 Jan '13

---------- Forwarded message ---------- From: "Keith Williamson" <hkwilliamson(a)gmail.com> Date: Feb 7, 2011 10:22 AM Subject: Re: Allstar QSO Recording To: "Bobby Lacey" <kf4gta(a)amsat.org> Cc: "app_rpt users list" <app_rpt-users(a)qrvc.com> Hi Bobby, The latest version which added remote command script capability is NodeShark v0.95 and can be downloaded from here: http://www.arizuni.com/NodeShark/ 73's, Keith KF7DRV Allstar: 2541 On 2/7/11, Bobby Lacey <kf4gta(a)amsat.org> wrote: > Hi Keith, > > I noticed on the app_rpt list that you were working on an interface for > playing recorded QSOs. I am really interested in this and was curious if you > have ever released it? Would love to try it out. > > Tnx & 73 > Bobby KF4GTA > -- Sent from my mobile device

3 2

Help Motorola GM300 and app_rpt
by FERNANDO VILLARROEL 30 Nov '12

30 Nov '12

Dear All. I have installed ACID succesfully I have the follows devices connected: Motorola GM300 conected to my Asterisk (Centos) http://www.dmkeng.com/URI_Order_Page.htm http://www.uricables.com/DuplexMotorola.html (i have connected from RX Cable) I am trying to doing PTT from Zoiper and IAXrpt, but not works. I do not understand why. http://allstarnode.com/viewtopic.php?f=5&t=67 When i try to do *98 i have not audio in radio base and mobiles radios (handy). Does anyone tell me what is the best config for usbradio.conf and rpt.conf? I hope anyone could help me or how i can do. Fernando

5 8

RTCM Firmware Upgrade ...
by Tony Youngblood 29 Nov '12

29 Nov '12

Got it figured out, I was following directions correctly it turns out, just had a weird issue w the loader utility being there but not there ... lol How To RTCM FirmWare Update Just learned how to get my rtcm's up to spec with the latest firmware (version 1.11)(11/04/2012). I checked mine with the 98 status command, one was version 1.0 and the other was 1.05 ... Thanks Jim Duuuude! You need the two files you will find here. The ENC_loader.INI and ENC_loader.exe files. http://svn.ohnosec.org/viewvc/projects/ ... /?root=svn and one of the .cry files from here ... Voter-SMT.cry for the RTCM. http://svn.ohnosec.org/viewvc/projects/ ... /?root=svn The default (hard-coded) IP address for the bootloader firmware is: 192.168.1.11. If this doesn't work for you, you will need to change it in the .INI file. Download to desktop and Run the ENC_loader.exe and enter the Target ip address of your RTCM and click "set address", click file and select the Voter-SMT.cry file that you downloaded as well. Telnet to the RTCM or use your 'Console Access' cable you may have built and login to it. First click the "Capture Target" button in the Encrypted Ethernet Loader Utility. Next execute the "r" command to reboot the RTCM. You will see data on the ENC_loader window in regards to the RTCM, click the "Program" button. Wait till you see the "finished programing file" message. Then click the "Reset LIA" button. Give it a minute and then it should be up and running the new firmware. ((Quick-Tip)) If the ENC_loader utility does not reveal itself and is running properly, check your screen resolution settings. From a smaller monitor screen the ENC_loader will not be seen ... BUT maximize screen resolution and esc back to normal and bingo ... tricked the windows to reveal the ENC_loader Utility Thanks Tim wd6AWP for the tips as well! 73 k5TRY ^^^heres my write up, I posted this on my rtcm thread as well-> http://allstarnode.com/viewtopic.php?f=14&t=62&sid=ec775c6e2423b39dfb3151cf… :(:) http://k5try.intuitwebsites.com/ ;(;)

2 1

jitter buffer in chan_simpleusb.c
by Ramesh Dhami (VA3UV) 27 Nov '12

27 Nov '12

Hi Guys; Has anyone experimented with the jitter buffer size in chan_simpleusb.c ? I have one node where the audio gets a little raspy every few seconds, then clears up.... it's cyclical like this. I am thinking about experimenting with the jitter buffer size in chan_simpleusb.c - but wanted to see if anyone else has 'been there done that'. Thx, Ramesh. www.freestar.us

2 1

connect 2 announcements
by 41.2 Jim 25 Nov '12

25 Nov '12

is there a way to turn off the female voice that tells you that you are connected to a node and it is done in voice. I understand it needs to tell me I'm connected but when connected to a hub it announces all connections to the hub and this telemetry is what i want to limit any ideas? thank you for your time -- Jim Frederick KF6QBW IRLP Node #3911 AllStar Node #'s 28839, 28842, 28843

1 0

sip.allstarlink.org
by Scott 24 Nov '12

24 Nov '12

Hello, We're trying to use sip.allstarlink.org. Using: sip://0@sip.allstarlink.org:5060; It rings and answers. My side starts the rtp stream; however, we do NOT see an rtp stream coming back. We do see the sip on udp banter for setup and then the timeout tare down. I *think* it's a codec negotiation failure in the PCMU framing rate 20 vs 30 ms and it just doesn't "catch." But I'm not sure. Are you able to see anything on your side? Is there another 'test' codec, like gsm@40ms, we could maybe try for debugging purposes. I know such issues are usually firewall related, but I've run, tcpdump -i eth0 host sip.allstarlink.org on the outside interface (before firewall process) and we're just NOT seeing the reply rtp stream hit the outside interface. My IP begins 99.232.n.n for your logs. Any help greatly appreciated! /Scott

1 0

Interesting problem
by Bryan D. Boyle 24 Nov '12

24 Nov '12

I have a simplex node (that I finally got working...); alinco DR135, that I use as an occasional link from my node(s) into the local club repeater (trying to demonstrate for them the wonders of asterisk...). The DR135 is set up for digital input, levels are ok, keying off the ptt on the rear connector. I can connect ok, get good modulation in both directions, PL works fine (i'm taking flat audio out of the 135 and injecting back in with asterisk handling the pl generation, etc.) Anyway...have an interesting problem that cropped up...when I connect the 135 to ANY of my 2 hubs or nodes and confirm the connection...my transmit side (listening on the transmit frequency of the link radio), when I key the 135, has a 1KC tone underneath the transmit audio. I've checked (via radio-tune-menu) that the 1KC tone is off, all the configurations are saved properly, etc. This ONLY happens when I connect the DR135 up as a simplex link; it does not happen between any of my other repeater nodes. It's a bit of a quandry...wondering what this could be. Any thoughts? BB

2 1