July 2014 - App_rpt-users - lists.keekles.org

Registration issues
by Thor Wiegman 30 Nov '15

30 Nov '15

Tonight I had a user tell me that one of my nodes wouldn't connect anywhere. Verified, rebooted the server, still nothing. Tried running the rc.updatenodelist script manually and it just sits there. However, after running the following command I do get an update and can now connect to other nodes. /usr/bin/wget -O /var/lib/asterisk/rpt_extnodeshttp://nodes1.allstarlink.org/cgi-bin/nodes.pl When I checked two other nodes they had the same problem and same work-around. I ran that same command for nodes2 and it works. When I run it for nodes3 it times out. Could a problem with nodes3.allstarlink.org be causing the rc.updatenodelist script to choke? And could that have been causing my nodes to not be able to connect to others?

5 5

URI<>TKR-750 cable
by Jay Urish 06 Feb '15

06 Feb '15

Does anybody have notes on connecting tkr750 to a URI? TIA, W5GM

4 3

Echo-stink
by Johnny Keeker 05 Jan '15

05 Jan '15

I've found the 'permit=w1aw,w5yi,etc' line in the echolink.conf only allows for 29 allowed calls. Any more than 30 entries in the list prevents incoming requests on or not on the list access to the node. Short of checking for typo's, using a backslash\ to continue to the next line, or adding another 'permit= line' hasn't proved any results. ???

6 6

Nodes with Traffic
by Skyler F 05 Aug '14

05 Aug '14

Hi, I installed a node on a repeater with little traffic. I want to play a lot of stuff so people scanning through the repeaters hear something and then go there and hang out on that repeater. What allstar nodes can I connect to that have a lot of traffic? (Like the Western or Win system reflector, which is IRLP) 73 Skyler kd0whb -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

6 6

Re: [App_rpt-users] IAX Ping
by Doug Crompton 30 Jul '14

30 Jul '14

Tim, Is this the same system that was showing such lousey numbers for iLBC? Dave and I conferred on that and he thought there might be something wrong with that system or in that case the hardware floating point. As I remember on the surface from its specs one would not think that. Do you have any other hardware to do a comparison with? Some systems just don't work as well as others even though they are suppose to. I suspect you could run some benchmarks to see. 73 Doug WA3DSP http://www.crompton.com/hamradio From: tim.sawyer(a)mac.com Subject: Re: [App_rpt-users] IAX Ping Date: Tue, 29 Jul 2014 21:18:18 -0700 To: doug(a)crompton.com Just FYI, Here’s netstats: Huntington*CLI> iax2 show netstats -------- LOCAL --------------------- -------- REMOTE --------------------Channel RTT Jit Del Lost % Drop OOO Kpkts Jit Del Lost % Drop OOO Kpkts FirstMsg LastMsgIAX2/173.164.198.177:5642 184 17 57 3357 5 28 8 171 431 471 4952 8 142 67 175 Rx:NEW Rx:ACK IAX2/127.0.0.1:4569-312 1 49 89 1820 13 1 1 103 379 419 47 11 0 0 9 Rx:NEW Tx:ACK IAX2/127.0.0.1:4569-511 3 21 62 9459 6 3 1 492 2 60 10 1 0 0 9 Tx:NEW Tx:ACK IAX2/127.0.0.1:4569-1213 3 0 40 0 0 0 0 64 2 42 9459 6 3 3 435 Rx:NEW Rx:ACK IAX2/127.0.0.1:4569-1296 3 379 419 47 11 0 0 66 49 89 1820 13 1 1 47 Tx:NEW Rx:ACK IAX2/homie-1380 15 2 61 50 2 0 0 66 23 65 9510 6 7 10 433 Rx:NEW Rx:ACK IAX2/127.0.0.1:4569-1590 3 21 62 9469 6 3 3 492 0 40 0 0 0 0 9 Tx:NEW Tx:ACK IAX2/127.0.0.1:4569-3089 1 2 60 10 1 0 0 65 20 62 9449 5 3 1 435 Rx:NEW Rx:ACK IAX2/127.0.0.1:4569-4392 1 21 61 260 6 0 0 9 1 60 10 1 0 0 0 Tx:NEW Tx:ACK IAX2/68.229.0.10:4569-475 83 19 64 1608 20 0 5 23 8 61 1587 4 1 0 97 Tx:NEW Rx:ACK IAX2/162.218.153.251:4569 74 67 107 2790 11 8 3 117 4 63 8930 6 2 2 383 Tx:NEW Rx:ACK IAX2/homie-10405 15 0 40 0 0 0 0 2 3 62 256 6 4 0 6 Tx:NEW Rx:ACK IAX2/127.0.0.1:4569-13612 3 1 60 10 1 0 0 2 2 42 239 7 0 0 6 Rx:NEW Rx:ACK IAX2/72.182.25.98:4569-14 95 158 206 17 3 3 0 6 27 71 861 8 19 0 23 Rx:NEW Rx:ACK 14 active IAX channels -- Tim :wq On Jul 29, 2014, at 7:56 AM, Doug Crompton <doug(a)crompton.com> wrote:Tim, I think you might be comparing apples and oranges. A ping is icmp protocol at the ip level and over a set period of time while the Asterisk statistics are cumulative over the entire time it has been running. It shows loss of iax udp packets which can be expected. Unless the loss is excessive over time I would not worry about it. There is never any guarantee that a udp packet is going to make it to its destination. If it were really bad you would hear it in the audio. There is a way to actually ping tcp and udp connections but I have never done it. My connections show the same minor loss over extended periods of use. Are you actually having a problem? https://github.com/tyru/srvtools 73 Doug WA3DSP http://www.crompton.com/hamradio From: tim.sawyer(a)mac.com Date: Mon, 28 Jul 2014 21:45:06 -0700 To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] IAX Ping Anyone know why regular ping would show no loss, yet IAX shows there is loss? I’ve even seen localhost connections with IAX loss. Which makes me think there is something other than a network problem. Here’s an example… 0% loss ICMP ping yet 7% IAX loss: --- 208.70.77.197 ping statistics ---100 packets transmitted, 100 received, 0% packet loss, time 99159msrtt min/avg/max/mdev = 5.939/7.540/10.921/0.882 ms[root@IronSystem ~]# asterisk -rAsterisk 1.6.2.24, Copyright (C) 1999 - 2010 Digium, Inc. and others.Created by Mark Spencer <markster(a)digium.com>Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.This is free software, with components licensed under the GNU General PublicLicense version 2 and other licenses; you are welcome to redistribute it undercertain conditions. Type 'core show license' for details.=========================================================================Connected to Asterisk 1.6.2.24 currently running on IronSystem (pid = 19087)Verbosity is at least 3IronSystem*CLI> iax2 show netstats -------------- LOCAL --------------- ------------- REMOTE ---------------Channel RTT Jit Del Lost % Drop OOO Kpkts Jit Del Lost % Drop OOO Kpkts FirstMsg LastMsgIAX2/208.70.77.197:4569-1 7 3 63 410 7 0 1 6 0 40 0 0 0 0 0 Tx:NEW Rx:ACK 1 active IAX channel -- Tim :wq _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem._______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

IAX Ping
by Tim Sawyer 29 Jul '14

29 Jul '14

Anyone know why regular ping would show no loss, yet IAX shows there is loss? I’ve even seen localhost connections with IAX loss. Which makes me think there is something other than a network problem. Here’s an example… 0% loss ICMP ping yet 7% IAX loss: --- 208.70.77.197 ping statistics --- 100 packets transmitted, 100 received, 0% packet loss, time 99159ms rtt min/avg/max/mdev = 5.939/7.540/10.921/0.882 ms [root@IronSystem ~]# asterisk -r Asterisk 1.6.2.24, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer <markster(a)digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 1.6.2.24 currently running on IronSystem (pid = 19087) Verbosity is at least 3 IronSystem*CLI> iax2 show netstats -------------- LOCAL --------------- ------------- REMOTE --------------- Channel RTT Jit Del Lost % Drop OOO Kpkts Jit Del Lost % Drop OOO Kpkts FirstMsg LastMsg IAX2/208.70.77.197:4569-1 7 3 63 410 7 0 1 6 0 40 0 0 0 0 0 Tx:NEW Rx:ACK 1 active IAX channel -- Tim :wq

2 2

Access to URI COR and PTT status via software
by ronald simpson 29 Jul '14

29 Jul '14

Hi guys, Looking for info on whether or not there are ways to monitor these gpio pins on a URI in real time. Maybe some command in Asterisk or app_rpt I missed... Ron, N6GKJ

1 0

Re: [App_rpt-users] IAX Ping
by mike＠midnighteng.com 29 Jul '14

29 Jul '14

1 0

Re: [App_rpt-users] Command to Disable/Enable ID
by Skyler Fennell 28 Jul '14

28 Jul '14

Thanks, that's what I wanted! I will test it out, hope, crossing my fingers that no node disconnects. Skyler On Jul 28, 2014, at 11:55 AM, Kenneth Grimard <n1dot1(a)gmail.com> wrote: > there is no dtmf command for that ulese you create one. > > it requires that you do asterisk -rx " rpt reload " from the asterisk cli or an external script > > from the cli you use rpt reload. > > ken n1dot > > > > On 7/28/2014 5:30 PM, Skyler Fennell wrote: >> What's the command for rpt reload? Sorry I'm new to all this still >> >> Skyler >> >> On Jul 28, 2014, at 11:19 AM, Kenneth Grimard <n1dot1(a)gmail.com> wrote: >> >>> no it should not. >>> >>> ken >>> >>> >>> >>> On 7/28/2014 4:59 PM, Skyler Fennell wrote: >>>> Will an RPT.conf reload (not an asterisk reload) disconnect the node? >>>> >>>> Would there be any way without the nodes all disconnecting to solve this problem? >>>> >>>> >>>> >>>> On Jul 28, 2014, at 10:44 AM, Kenneth Grimard <n1dot1(a)gmail.com> wrote: >>>> >>>>> On 7/28/2014 4:40 PM, Skyler F wrote: >>>>>> What is COP 17 and 18? >>>>>> >>>>>> It says that it can do this : does that mean that it can do this >>>>>> >>>>>> * 17 - User functions (time, id, etc) enable >>>>>> * 18 - User functions (time, id, etc) disable >>>>>> >>>>>> would that solve my problem? I would use COP 17 to enable and COP 18 to disable >>>>>> >>>>>> Skyler KDØWHB >>>>> no those only disable or enable user function codes only. they will not disable the id's at all. >>>>> >>>>> ken n1dot >

1 0

Command to Disable/Enable ID
by Skyler F 28 Jul '14

28 Jul '14

I have a link to a remote repeater using the input frequency. We finally figured out how to execute a command when the last link disconnects but not when 1 link is still connected while the other disconnects. In the connect and disconnect script files, we have the DTMF dialing. *Is there a command I can use to completely disable the ID without disabling any other telemetry or changing anything else so I can put that in the script files? * The node ONLY needs to ID when it is transmitting, and the ONLY time it transmits is when it is connected to a link. you might say "hey, what if you are only connected for 8 mins, not 10 and it does not ID" , well I will have it ID on disconnect. Thanks, this is the last problem we have to fix, and if not, our only other choice is to let the ID loop play every 10 mins. Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

3 5