January 2011 - App_rpt-users - lists.keekles.org

SheevaPlug
by Monty Dana 03 Jan '12

03 Jan '12

Anyone ever try to run app_rpt on the SheevaPlug <http://plugcomputer.org/>? -- Monty

4 3

Echolink Link Status
by K&R Yoksh 13 Feb '11

13 Feb '11

Hello, My apologies if this has been covered.. I searched the archives this morning before posting.. I'm just getting my Echolink node connected, and curious if it's possible to report my node to Echolink's Link Status screen? http://www.echolink.org/links.jsp Thanks.. 73, Kyle K0KN

8 19

Quad Radio PCI Board Configuration Help
by John (WB5NFC) 30 Jan '11

30 Jan '11

I recently purchased a used Quad PCI board and find I need some help with configuration, especially with zaptel.conf and zapata.conf. I've read the setup instructions and sample files, but I'm still confused. Desired outcome is to configure all four channels as follows: Channels: 1 - Allstar node 2186 PL 100 Hz TX & RX Non-inverted COR 2 - Allstar node 2293 PL 100 Hz TX & RX Non-inverted COR 3 - Private Link Node (1000) DCS 365 (normal) Inverted COR 4 - Remote base IC-706 To be determined... (next on the project list) Example configs, suggestions and/or guidance greatly appreciated. John / WB5NFC

2 1

Re: [App_rpt-users] Scheduling audio messages
by KI6PSP (Ed) 30 Jan '11

30 Jan '11

Use something like this, and it will play a file every hour like you are wanting. [schedule] 10= 00 * * * * [functions] 910=playback,rpt/510 [macro] 10=*910# ;Information -- KI6PSP (Ed)

1 0

Nodes no longer in database
by Tony KT9AC 29 Jan '11

29 Jan '11

I'm playing around with my test system at home, and noticed that on the Allstar Link Network - Node list my three nodes are "no longer in the database" yet show up as green on the page. Some other nodes picked at random show up fine, and I did migrate them back when the new Portal first came out (removed the "A" from the registration section). I can connect to Jim's node 2000 just fine so I think all is working. Nodes 27129, 27418 and 27460 are mine. Thanks, Tony

1 1

Scheduling audio messages
by KC2WDZ 29 Jan '11

29 Jan '11

How would you schedule an audio message file to play every hour or so? As it seems, tailmessage wont work for me because I'm running a simplex node with no tones or hangtimes (duplex=0 in rpt.conf).

1 0

Messages log file question
by Matt Beasant 29 Jan '11

29 Jan '11

Hi, Is there any way that I can stop the Indian hackers who are constantly trying to find a valid extension / password combination on my SIP gateway into the repeaters? They're using up a bunch of my capped internet bandiwdth and making 10 days worth of messages log over 24Mb! If not, is there a way to stop such attempts filing the messages log with megs and megs of this stuff? Thanks Matt G4RKY

2 1

CTCSS Problem
by Kris Kirkland 27 Jan '11

27 Jan '11

Howdy First I'd like to start off by saying thanks for such a great piece of software for asterisk, I've been using Asterisk for 6 years now. I'm a network engineer so I'm not a repeater guru by any means, but I'm having a problem with my setup using the URI Model: DMK URI My first problem is; if ctcssfrom is set to anything but dsp, the repeater keys up as soon as asterisk is started. I can even disconnect everything but PTT and Ground and it still keys up as soon as its started. I did this to eliminate the possibility of the device sensing CTCSS via the mic_in_ac. So my understanding was that if I set ctcssfrom=no then it would ignore ctcss, but it still keys up. Is this a bug in the software being that it happens even with everything but ptt/gnd is disconnected? -- ______________________ Kris Kirkland ~ K5KRK ______________________

3 6

Re: [App_rpt-users] CTCSS Problem
by Tony KT9AC 27 Jan '11

27 Jan '11

I believe that's what the documentation or even within the usbradio.conf file says. Ctcssfrom=no; system will be carrier access ----- Reply message ----- From: "Kris Kirkland" <kris(a)kriskirkland.com> Date: Thu, Jan 27, 2011 2:37 pm Subject: [App_rpt-users] CTCSS Problem To: <app_rpt-users(a)ohnosec.org> So if I set ctcssfrom=no will it disable ctcss checking all together and repeat based on COR? If I can disable CTCSS then I can narrow my problem down a little further. -- ______________________ Kris Kirkland ~ K5KRK ______________________ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Wx Script
by k8khw＠att.net 27 Jan '11

27 Jan '11

I have found using the WOANM wx Script plays on Asterisk Node using Playback just fine. His script now uses wavplay which wont key the Radio ect to play the files. Anyone know what I could to to get playback to be called to play the wx files instead of wavplay Randy

3 2