January 2019 - App_rpt-users - lists.keekles.org

Limey Unix
by Todd Lesser 04 Mar '19

04 Mar '19

Does anyone know how to save the network configuration in Limey Linux? My node is currently set up as static IP and I want to change it to DHCP. I run net setup but when I reboot, it loses it all. I assume there is a command that will save it to flash memory. Does anyone know what that is? Thanks

4 4

Choppy Audio
by Mark Johnston 21 Feb '19

21 Feb '19

Hello, ... Issues with audio on ASL 1.01 GIT version 004b9dd Usually issue clears up after reboot, was happening every few months, now seems every day/few days... This does not appear to be network issue, as ID's and courtesy tones, local audio files, are also impacted. Using DSP aka usbradio issue is heard even via phone portal using standared URI Single Node 4.9.0-6-686-pae Kernel Intel Atom CPU 1.8Ghz 2GB Ram SSD *load average: 0.12, 0.07, 0.02* *Logs show:* *[Jan 27 11:55:49] WARNING[372] chan_usbradio.c: Loaded parameters from usbradio_tune_usb_27038.conf for device usb_27038 .* *[Jan 27 11:55:49] WARNING[370] chan_usbradio.c: Possibly stuck USB read channel. [usb_27038]* *[Jan 27 11:55:49] WARNING[370] chan_usbradio.c: Nope, USB read channel [usb_27038] wasn't stuck after all.* *[Jan 27 11:55:49] NOTICE[372] chan_usbradio.c: USB Adapter has no EEPROM installed or Checksum BAD on channel usb_27038* *Dmesg:* *[ 314.006920] **perf**: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750* *[ 366.570103] **perf**: interrupt took too long (3169 > 3133), lowering kernel.perf_event_max_sample_rate to 63000* *[ 429.870947] **perf**: interrupt took too long (3963 > 3961), lowering kernel.perf_event_max_sample_rate to 50250* *I have been restarting weekly, and the issue is only getting worse, any thoughts?, Is there a newer version of ASL?* *Thanks,* *Mark*

3 5

ASL on Asterisk LTS
by Marco Brunozzi 10 Feb '19

10 Feb '19

Hi everyone, I'm looking for a way to use Asterisk LTS or other new version for ASL, is that possible? Thanks in advance, 73 Marco IW0RED. -- Marco Brunozzi Tel. +14152360004 Cel. +393483343274 Skype: marco.brunozzi Twitter: marcobrunozzi ---------------------------------------

5 6

Secure access to nodes without node IAX password?
by DuaneVT 31 Jan '19

31 Jan '19

Web Transceiver allow(ed) a registered Ham to access a remote node using authentication from the ASL account. ASL provided a blanket authentication. Using DVSwitch or IAX RPT, I would have to issue a user a unique password for access to this node. They could easily divulge it to another who could cause mischief. Is there now or in the future, a way of working through the ASL account to grant registered users access to many nodes at once? Thoughts? Duane, KA1LM 42996

1 0

HEX files
by Marco Brunozzi 30 Jan '19

30 Jan '19

Hi everyone, I'm looking for the hex files for the voter board. Where I can find it? Thanks in advance. 73 Marco IW0RED. -- Marco Brunozzi Tel. +14152360004 Cel. +393483343274 Skype: marco.brunozzi Twitter: marcobrunozzi ---------------------------------------

2 1

link status announcements
by George Csahanin 29 Jan '19

29 Jan '19

Folks, is there a way to play link status announcements at the local node that made the interrogation or command? We have one node that makes many link status long requests and commands resulting in "already in this mode", and maybe a long string of node numbers. Even when I connect/disconnect it would be nice to not disrupt comms on other nodes. So...is there a way to only hear this locally? GeorgeC W2DB 2360, 28599 -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5710 office 401-338-0568 cel george(a)w2db.com

2 1

New Node Numbers
by Tim Sawyer 28 Jan '19

28 Jan '19

We were getting close to issuing node numbers within the 50000 block. Turns out there are about 2000 nodes within the 40000 block that have not been issued. Those will start going out today. -- Tim WD6AWP

1 0

ASL on Asterisk LTS
by Marco Brunozzi 28 Jan '19

28 Jan '19

Hi everyone, I'm looking for a way to use Asterisk LTS or other new version for ASL, is that possible? Thanks in advance, 73 Marco IW0RED. -- Marco Brunozzi Tel. +14152360004 Cel. +393483343274 Skype: marco.brunozzi Twitter: marcobrunozzi ---------------------------------------

1 0

Running an AllStarLink. Hub in AWS ...
by Gerry Filby 24 Jan '19

24 Jan '19

... or any other VM provider for that matter. Hi Folks, I've tried installing the AMD64 iso in my local VirtualBox exported to OVA and tried to import it into AWS. Unfortunately the highest rev of Debian supported by the AWS-ECS import process is Debian 8. Has anyone made this work ? Could use some advice. 2 possible alternatives (hopefully) that come to mind: - (since AWS does have a Debian 9 AMI) - installing on clean Debian from some Repo ? - Another VM provider that supports importing Debian 9 images ? Any help would be much appreciated ... 73 from Gerry W6WNG

6 6

webtranciver?
by jimmy keffer 24 Jan '19

24 Jan '19

are there plans to bring back webtransciver? jimmy ka3vgm

3 6