June 2018 - App_rpt-users - lists.keekles.org

AP2CJ Node 48092 no longer in DB
by Shehzad Hamid 12 Sep '18

12 Sep '18

Greetings, A little background, ive installed ASL on intel Atom with the modified usb FOB cm108 and an HT for RF on 144MHz, have echolink enabled and all connections from echolink and allstar in and out establish perfectly, configured the port forwarding on the router and all worked well. The bigger plan is to putup at least 3 nodes in Pakistan linking 3 city coverage repeaters together in future while having the facility of world being connected to us or vise versa :D. The issue in subject line has been posted many times before and I have gone through almost all of them for the past 3+ days now but to no avail. The node does not show up in the online nodes list nor on http://status.allstarlink.org/nodeinfo.cgi?node=48092 where as it does showup green in system-wide node list, the iax2 show registry shows allstarlink1*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 48092 39.50.88.107:10880 60 Registered have checked all possible network settings and no change from the first day it went online. repeater@allstarlink1:~$ sudo cat /tmp/rpt_extnodes-temp | grep 48092 48092=radio@39.50.88.107:4569/48092,39.50.88.107 repeater@allstarlink1:~$ sudo grep 48092 /var/lib/asterisk/rpt_extnodes 48092=radio@39.50.88.107:4569/48092,39.50.88.107 ran tcpdump on the allstarnode and I can see the packets being sent and acknowledged (below). 14:22:47.299321 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [S], seq 1388935083, win 29200, options [mss 1460,sackOK,TS val 1223790 ecr 0,nop,wscale 7], length 0 14:22:47.303605 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [S], seq 2416777296, win 29200, options [mss 1460,sackOK,TS val 1223791 ecr 0,nop,wscale 7], length 0 14:22:47.625331 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [S.], seq 953265040, ack 1388935084, win 28960, options [mss 1452,sackOK,TS val 914084267 ecr 1223790,nop,wscale 7], length 0 14:22:47.625451 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [.], ack 1, win 229, options [nop,nop,TS val 1223872 ecr 914084267], length 0 14:22:47.625642 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [P.], seq 1:316, ack 1, win 229, options [nop,nop,TS val 1223872 ecr 914084267], length 315: HTTP: GET /uhandler.php?node=48092&time=1529313767&seqno=107&nodes=&apprptvers=0.327&apprptuptime=1875&totalkerchunks=0&totalkeyups=5&totaltxtime=33&timeouts=0&totalexecdcommands=1 HTTP/1.1 14:22:47.632208 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [S.], seq 1293069211, ack 2416777297, win 28960, options [mss 1452,sackOK,TS val 914084267 ecr 1223791,nop,wscale 7], length 0 14:22:47.632359 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [.], ack 1, win 229, options [nop,nop,TS val 1223873 ecr 914084267], length 0 14:22:47.632735 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [P.], seq 1:217, ack 1, win 229, options [nop,nop,TS val 1223873 ecr 914084267], length 216: HTTP: GET /uhandler.php?node=48092&time=1529313767&seqno=108&keyed=0&keytime=1885 HTTP/1.1 14:22:47.953808 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [.], ack 316, win 235, options [nop,nop,TS val 914084349 ecr 1223872], length 0 14:22:47.958200 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [P.], seq 1:208, ack 316, win 235, options [nop,nop,TS val 914084350 ecr 1223872], length 207: HTTP: HTTP/1.1 200 OK 14:22:47.958288 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [.], ack 208, win 237, options [nop,nop,TS val 1223955 ecr 914084350], length 0 14:22:47.960295 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [F.], seq 316, ack 208, win 237, options [nop,nop,TS val 1223955 ecr 914084350], length 0 14:22:47.962823 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [.], ack 217, win 235, options [nop,nop,TS val 914084350 ecr 1223873], length 0 14:22:47.966204 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [P.], seq 1:208, ack 217, win 235, options [nop,nop,TS val 914084351 ecr 1223873], length 207: HTTP: HTTP/1.1 200 OK 14:22:47.966263 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [.], ack 208, win 237, options [nop,nop,TS val 1223957 ecr 914084351], length 0 14:22:47.968871 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [F.], seq 217, ack 208, win 237, options [nop,nop,TS val 1223957 ecr 914084351], length 0 14:22:48.284755 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [F.], seq 208, ack 317, win 235, options [nop,nop,TS val 914084432 ecr 1223955], length 0 14:22:48.284887 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [.], ack 209, win 237, options [nop,nop,TS val 1224037 ecr 914084432], length 0 14:22:48.296156 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [F.], seq 208, ack 218, win 235, options [nop,nop,TS val 914084433 ecr 1223957], length 0 14:22:48.296248 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [.], ack 209, win 237, options [nop,nop,TS val 1224039 ecr 914084433], length 0 Please advise -- 73's Shehzad AP2CJ

4 10

Re: [App_rpt-users] iaxrpt
by Mike Besemer 01 Jul '18

01 Jul '18

All, With the help of Dave AH6OD, this issue has been resolved. Thanks to all who shared their knowledge, and a special thanks to Dave for spending over an hour-and-a-half with me online today getting this fixed. 73, Mike WM4B From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Mike Besemer Sent: Thursday, June 28, 2018 8:00 PM To: Users of Asterisk app_rpt Subject: [App_rpt-users] iaxrpt Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address. I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com and have double checked everything. The port is open for both UDP and TCP connections. The firewall seems ok. It has to be something obvious. What did I miss? Mike WM4B

4 3

Upgrade to v1.5 not Working
by Jim Korenz 30 Jun '18

30 Jun '18

Hi All, I'm doing an "easy" upgrade from v1.1 to ver 1.5 Allstar on an PI 2. The "old" system was working fine. OK, now the "new" system. I changed the root password, but can't login with it. I have "successfully" changed it a number of times, but no luck. I can ping the allstar server, but I'm not in the active list. I can't run the simpleUSB tune app from the menu. I have a green light on the USB FOB, but it's not blinking. JimK N8PXW

3 2

Re: [App_rpt-users] iaxrpt
by Mike Besemer 30 Jun '18

30 Jun '18

All, It's not an Android issue. Android works fine from an external IP but not from my Internal IP. That should indicate that the stanza(s) are fine. Mike WM4B -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Mike Sent: Saturday, June 30, 2018 12:19 PM To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] iaxrpt If he is to use that, he will also need a line in globals like: node = 12345 or replace both "${node}" with the actual node number "12345". ...mike/kb8jnm On 6/30/2018 11:49 AM, David Shaw wrote: > Sorry Mike use this line in the extensions.conf > > [radio-gui] > exten => ${NODE},1,rpt(${NODE}|X) > > > > -- > Thanks, David > > "Laws that forbid the carrying of arms...disarm only those who are neither > inclined nor determined to commit crimes. Such laws make things worse for > the assaulted and better for the assailants; they serve rather to encourage > than prevent homicides, for an unarmed man may be attacked with greater > confidence than an armed one." > Thomas Jefferson > > On Sat, Jun 30, 2018 at 8:34 AM, David Shaw <shawpbx(a)gmail.com> wrote: > >> Hello Mike, >> >> If your problem is with the android app. You need to make some changes. >> >> You will need to edit iax.conf and extensions.conf >> >> Howto: >> cd /etc/asterisk >> >> sudo nano iax.conf >> >> >> [CallSign] ; Connect from iaxrpt Username >> field (PC AllStar Client) >> type = friend ; Notice type is user here >> <--------------- >> context = radio-gui ; Context to jump to in >> extensions.conf >> auth = md5 >> secret = password >> host = dynamic >> disallow = all >> allow = ulaw >> transfer = no >> >> >> sudo nano extensions.conf >> >> [radio-gui] >> exten => 2060,1,rpt,2060|X >> >> >> >> David >> >> >> >> >> >> >> >> >> >> >> >> >> -- >> Thanks, David >> >> "Laws that forbid the carrying of arms...disarm only those who are neither >> inclined nor determined to commit crimes. Such laws make things worse for >> the assaulted and better for the assailants; they serve rather to encourage >> than prevent homicides, for an unarmed man may be attacked with greater >> confidence than an armed one." >> Thomas Jefferson >> >> On Sat, Jun 30, 2018 at 6:38 AM, Mike Besemer <mwbesemer(a)cox.net> wrote: >> >>> Tried all and failed. Also tried from my Windows tablet and Android >>> table, both via my Wifi. >>> >>> I’m WAY beyond perplexed! >>> >>> Mike >>> WM4B >>> >>> From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] >>> On Behalf Of David Shaw >>> Sent: Friday, June 29, 2018 6:43 PM >>> To: Users of Asterisk app_rpt >>> Subject: Re: [App_rpt-users] iaxrpt >>> >>> Hey Mike the stanza is fine. >>> >>> [Nodes] >>> 48166 = radio@127.0.0.1:4569/48166,NONE >>> This just tells Asterisk (ASL) where node 48166 is. The 127.0.0.0/8 is >>> used by the server. This is OK. >>> >>> This is what we know as of now: >>> ASL is setup and working to allow connection on port 4569. You have >>> iax2.conf configured to allow a user to login. I would say ASL is setup and >>> working. >>> >>> If your computer is on the same subnet as your ASL node. >>> >>> I would check: >>> Windows Firewall >>> Windows Anti-Virus >>> >>> Wireless access point turn off AP Isolation >>> https://wiki.dd-wrt.com/wiki/index.php/Advanced_wireless_set >>> tings#AP_Isolation >>> >>> Router turn any network Isolation >>> https://wiki.dd-wrt.com/wiki/index.php/Guest_Network#Guest_A >>> ccess_to_a_Network_Device >>> >>> >>> >>> David >>> >>> >>> >>> >>> >>> -- >>> Thanks, David >>> >>> "Laws that forbid the carrying of arms...disarm only those who are >>> neither inclined nor determined to commit crimes. Such laws make things >>> worse for the assaulted and better for the assailants; they serve rather to >>> encourage than prevent homicides, for an unarmed man may be attacked with >>> greater confidence than an armed one." >>> Thomas Jefferson >>> >>> On Fri, Jun 29, 2018 at 2:00 PM, Mike Besemer <mwbesemer(a)cox.net> wrote: >>> Here's what I've got so far. >>> >>> tracert reports 1 hop: 1 2ms 2ms 2ms RaspberryPi >>> 192.168.x.x >>> >>> Android Phone connected to Verizon network: Good connect via the >>> external IP >>> Android Phone in Airplane mode connected to my wireless network: No >>> connect >>> Windows Computer connected to my wireless network: No connect >>> >>> So, it seems to be an internal/external IP issue rather than an >>> Android/Windows issue - which is what I had originally thought. That >>> should mean that the [stanza] in iaxrpt.conf and extensions.conf is correct >>> - at least for the android phone. (The Android works on the external IP >>> but not the internal IP, and that proves the stanzas are ok.) >>> >>> Tracert is reporting one hop from the Windows machine to the Pi - so the >>> machines are seeing each other. >>> >>> Attached is a lousy photo of a netstat -pln run from the pi, but I don't >>> know what I'm looking at. >>> >>> Mike >>> WM4B >>> >>> >>> >>> >>> From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] >>> On Behalf Of David Shaw >>> Sent: Friday, June 29, 2018 10:19 AM >>> To: Users of Asterisk app_rpt >>> Subject: Re: [App_rpt-users] iaxrpt >>> >>> Most new routers won't allow you to exit the local network (LAN) and come >>> back in. This might happen if you use a domain name that is associated with >>> your public address. If you want to use your public domain name to access >>> your node from inside your LAN. You'll need to add a DNS entry to your >>> router. **See "Side Note" below >>> >>> By default IAX2 uses UDP port 4569 and the bind address is set to all >>> interfaces/addresses in the ASL OS (allstarlink.org) As for the >>> hamvoip.com settings, you should check with them. >>> >>> Are you using the hostname or IP address to access your node? >>> Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices. >>> >>> Testing: >>> From your windows based computer. Try tracert and the IPaddress of the >>> node. >>> >>> tracert 192.168.x.x >>> >>> 1 <1 ms <1 ms <1 ms 192.168.x.x >>> >>> There should be only one hope to your node if your windows computer in on >>> the same network. >>> >>> Side note: >>> I use dhcp on all my nodes on my LAN networks. I give them static address >>> via the DHCP server. I also change the hostname on the node. i.e. asl2060 >>> This allows the router's internal DNS server to associate the hostname >>> and IP address for the ASL node. Some routers will allow you to add a >>> domain name. >>> Also there is no need to open TCP port forwarding on you router for IAX2 >>> 4569. >>> >>> David >>> >>> >>> >>> >>> >>> -- >>> Thanks, David >>> >>> "Laws that forbid the carrying of arms...disarm only those who are >>> neither inclined nor determined to commit crimes. Such laws make things >>> worse for the assaulted and better for the assailants; they serve rather to >>> encourage than prevent homicides, for an unarmed man may be attacked with >>> greater confidence than an armed one." >>> Thomas Jefferson >>> >>> On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer(a)cox.net> wrote: >>> No. I've never seen reference to that. I'm still in the initial phase >>> of setting up this node; have not messed with rpt.conf yet. >>> >>> Mike >>> WM4B >>> >>> >>> On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: >>> Did you add your local node address for each node in the rpt,conf [nodes] >>> stanza? >>> Thanks, >>> Bob >>> K6ECM >>> 73 >>> >>> On Jun 28, 2018, at 6:12 PM, Mike <mm(a)midnighteng.com> wrote: >>> >>> >>> Mike, >>> >>> Still a lot of possibilities of things that may not be right but, >>> >>> Just so that you are conducting a 'good test' behind your nat through >>> wifi, >>> >>> put your phone in airplane mode, then turn just the wifi on and connect. >>> >>> You might also want to turn the forwarding to just the UDP 4569 and >>> specify that in your phone connect, >>> >>> guessing your using the android iaxrpt.... like this for your IP... >>> >>> 192.169.1.101:4569 < :port especially if not the norm, but do it >>> anyway. >>> That's a few things to investigate anyway, >>> >>> Let me know if your still having issues. >>> >>> Oh... don't forget to get back out of airplane mode / turn cellular back >>> on when done. >>> >>> Hate to see ya late for dinner ...lol >>> ...mike/kb8jnm >>> On 6/28/2018 8:00 PM, Mike Besemer wrote: >>> Making progress on my node. After several false starts I finally got the >>> node connected and am able to connect via iaxrpt from my Android devices if >>> I use my EXTERNAL IP address. >>> >>> I cannot connect from Android or Windows using my INTERAL IP address. I >>> followed the guide at hamvoip.com and have double checked everything. >>> >>> The port is open for both UDP and TCP connections. The firewall seems ok. >>> >>> It has to be something obvious. What did I miss? >>> >>> Mike >>> >>> WM4B >>> >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/c >>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of >>> the page. Enter your email address and press the "Unsubscribe or edit >>> options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/c >>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of >>> the page. Enter your email address and press the "Unsubscribe or edit >>> options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >>> >>> ------------------------------ >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/c >>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of >>> the page. Enter your email address and press the "Unsubscribe or edit >>> options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/c >>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of >>> the page. Enter your email address and press the "Unsubscribe or edit >>> options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/c >>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of >>> the page. Enter your email address and press the "Unsubscribe or edit >>> options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/c >>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of >>> the page. Enter your email address and press the "Unsubscribe or edit >>> options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >> >> > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Re: [App_rpt-users] iaxrpt
by Mike Besemer 30 Jun '18

30 Jun '18

Tried all and failed. Also tried from my Windows tablet and Android table, both via my Wifi. I’m WAY beyond perplexed! Mike WM4B From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David Shaw Sent: Friday, June 29, 2018 6:43 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] iaxrpt Hey Mike the stanza is fine. [Nodes] 48166 = radio@127.0.0.1:4569/48166,NONE This just tells Asterisk (ASL) where node 48166 is. The 127.0.0.0/8 is used by the server. This is OK. This is what we know as of now: ASL is setup and working to allow connection on port 4569. You have iax2.conf configured to allow a user to login. I would say ASL is setup and working. If your computer is on the same subnet as your ASL node. I would check: Windows Firewall Windows Anti-Virus Wireless access point turn off AP Isolation https://wiki.dd-wrt.com/wiki/index.php/Advanced_wireless_settings#AP_Isolat… Router turn any network Isolation https://wiki.dd-wrt.com/wiki/index.php/Guest_Network#Guest_Access_to_a_Netw… David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 29, 2018 at 2:00 PM, Mike Besemer <mwbesemer(a)cox.net> wrote: Here's what I've got so far. tracert reports 1 hop: 1 2ms 2ms 2ms RaspberryPi 192.168.x.x Android Phone connected to Verizon network: Good connect via the external IP Android Phone in Airplane mode connected to my wireless network: No connect Windows Computer connected to my wireless network: No connect So, it seems to be an internal/external IP issue rather than an Android/Windows issue - which is what I had originally thought. That should mean that the [stanza] in iaxrpt.conf and extensions.conf is correct - at least for the android phone. (The Android works on the external IP but not the internal IP, and that proves the stanzas are ok.) Tracert is reporting one hop from the Windows machine to the Pi - so the machines are seeing each other. Attached is a lousy photo of a netstat -pln run from the pi, but I don't know what I'm looking at. Mike WM4B From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David Shaw Sent: Friday, June 29, 2018 10:19 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] iaxrpt Most new routers won't allow you to exit the local network (LAN) and come back in. This might happen if you use a domain name that is associated with your public address. If you want to use your public domain name to access your node from inside your LAN. You'll need to add a DNS entry to your router. **See "Side Note" below By default IAX2 uses UDP port 4569 and the bind address is set to all interfaces/addresses in the ASL OS (allstarlink.org) As for the hamvoip.com settings, you should check with them. Are you using the hostname or IP address to access your node? Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices. Testing: >From your windows based computer. Try tracert and the IPaddress of the node. tracert 192.168.x.x 1 <1 ms <1 ms <1 ms 192.168.x.x There should be only one hope to your node if your windows computer in on the same network. Side note: I use dhcp on all my nodes on my LAN networks. I give them static address via the DHCP server. I also change the hostname on the node. i.e. asl2060 This allows the router's internal DNS server to associate the hostname and IP address for the ASL node. Some routers will allow you to add a domain name. Also there is no need to open TCP port forwarding on you router for IAX2 4569. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer(a)cox.net> wrote: No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet. Mike WM4B On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: Did you add your local node address for each node in the rpt,conf [nodes] stanza? Thanks, Bob K6ECM 73 On Jun 28, 2018, at 6:12 PM, Mike <mm(a)midnighteng.com> wrote: Mike, Still a lot of possibilities of things that may not be right but, Just so that you are conducting a 'good test' behind your nat through wifi, put your phone in airplane mode, then turn just the wifi on and connect. You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect, guessing your using the android iaxrpt.... like this for your IP... 192.169.1.101:4569 < :port especially if not the norm, but do it anyway. That's a few things to investigate anyway, Let me know if your still having issues. Oh... don't forget to get back out of airplane mode / turn cellular back on when done. Hate to see ya late for dinner ...lol ...mike/kb8jnm On 6/28/2018 8:00 PM, Mike Besemer wrote: Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address. I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com and have double checked everything. The port is open for both UDP and TCP connections. The firewall seems ok. It has to be something obvious. What did I miss? Mike WM4B _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

3 4

Re: [App_rpt-users] iaxrpt
by Mike Besemer 30 Jun '18

30 Jun '18

David, The Android app works fine from an external IP, so the stanza is ok. It’s got to be some sort of routing issue with my internal IP. 73, Mike WM4B From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David Shaw Sent: Saturday, June 30, 2018 11:34 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] iaxrpt Hello Mike, If your problem is with the android app. You need to make some changes. You will need to edit iax.conf and extensions.conf Howto: cd /etc/asterisk sudo nano iax.conf [CallSign] ; Connect from iaxrpt Username field (PC AllStar Client) type = friend ; Notice type is user here <--------------- context = radio-gui ; Context to jump to in extensions.conf auth = md5 secret = password host = dynamic disallow = all allow = ulaw transfer = no sudo nano extensions.conf [radio-gui] exten => 2060,1,rpt,2060|X David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Sat, Jun 30, 2018 at 6:38 AM, Mike Besemer <mwbesemer(a)cox.net> wrote: Tried all and failed. Also tried from my Windows tablet and Android table, both via my Wifi. I’m WAY beyond perplexed! Mike WM4B From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David Shaw Sent: Friday, June 29, 2018 6:43 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] iaxrpt Hey Mike the stanza is fine. [Nodes] 48166 = radio@127.0.0.1:4569/48166,NONE This just tells Asterisk (ASL) where node 48166 is. The 127.0.0.0/8 is used by the server. This is OK. This is what we know as of now: ASL is setup and working to allow connection on port 4569. You have iax2.conf configured to allow a user to login. I would say ASL is setup and working. If your computer is on the same subnet as your ASL node. I would check: Windows Firewall Windows Anti-Virus Wireless access point turn off AP Isolation https://wiki.dd-wrt.com/wiki/index.php/Advanced_wireless_settings#AP_Isolat… Router turn any network Isolation https://wiki.dd-wrt.com/wiki/index.php/Guest_Network#Guest_Access_to_a_Netw… David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 29, 2018 at 2:00 PM, Mike Besemer <mwbesemer(a)cox.net> wrote: Here's what I've got so far. tracert reports 1 hop: 1 2ms 2ms 2ms RaspberryPi 192.168.x.x Android Phone connected to Verizon network: Good connect via the external IP Android Phone in Airplane mode connected to my wireless network: No connect Windows Computer connected to my wireless network: No connect So, it seems to be an internal/external IP issue rather than an Android/Windows issue - which is what I had originally thought. That should mean that the [stanza] in iaxrpt.conf and extensions.conf is correct - at least for the android phone. (The Android works on the external IP but not the internal IP, and that proves the stanzas are ok.) Tracert is reporting one hop from the Windows machine to the Pi - so the machines are seeing each other. Attached is a lousy photo of a netstat -pln run from the pi, but I don't know what I'm looking at. Mike WM4B From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David Shaw Sent: Friday, June 29, 2018 10:19 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] iaxrpt Most new routers won't allow you to exit the local network (LAN) and come back in. This might happen if you use a domain name that is associated with your public address. If you want to use your public domain name to access your node from inside your LAN. You'll need to add a DNS entry to your router. **See "Side Note" below By default IAX2 uses UDP port 4569 and the bind address is set to all interfaces/addresses in the ASL OS (allstarlink.org) As for the hamvoip.com settings, you should check with them. Are you using the hostname or IP address to access your node? Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices. Testing: >From your windows based computer. Try tracert and the IPaddress of the node. tracert 192.168.x.x 1 <1 ms <1 ms <1 ms 192.168.x.x There should be only one hope to your node if your windows computer in on the same network. Side note: I use dhcp on all my nodes on my LAN networks. I give them static address via the DHCP server. I also change the hostname on the node. i.e. asl2060 This allows the router's internal DNS server to associate the hostname and IP address for the ASL node. Some routers will allow you to add a domain name. Also there is no need to open TCP port forwarding on you router for IAX2 4569. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer(a)cox.net> wrote: No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet. Mike WM4B On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: Did you add your local node address for each node in the rpt,conf [nodes] stanza? Thanks, Bob K6ECM 73 On Jun 28, 2018, at 6:12 PM, Mike <mm(a)midnighteng.com> wrote: Mike, Still a lot of possibilities of things that may not be right but, Just so that you are conducting a 'good test' behind your nat through wifi, put your phone in airplane mode, then turn just the wifi on and connect. You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect, guessing your using the android iaxrpt.... like this for your IP... 192.169.1.101:4569 < :port especially if not the norm, but do it anyway. That's a few things to investigate anyway, Let me know if your still having issues. Oh... don't forget to get back out of airplane mode / turn cellular back on when done. Hate to see ya late for dinner ...lol ...mike/kb8jnm On 6/28/2018 8:00 PM, Mike Besemer wrote: Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address. I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com and have double checked everything. The port is open for both UDP and TCP connections. The firewall seems ok. It has to be something obvious. What did I miss? Mike WM4B _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Re: [App_rpt-users] iaxrpt
by Mike Besemer 29 Jun '18

29 Jun '18

Thanks, David. Much appreciated. I’ll take a look at it tomorrow… I’ve already beat my head enough today and just got in from mowing and walking Harley the Wonder Beagle. Time for something cold and hoppy. 73, Mike WM4B From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David Shaw Sent: Friday, June 29, 2018 6:43 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] iaxrpt Hey Mike the stanza is fine. [Nodes] 48166 = radio@127.0.0.1:4569/48166,NONE This just tells Asterisk (ASL) where node 48166 is. The 127.0.0.0/8 is used by the server. This is OK. This is what we know as of now: ASL is setup and working to allow connection on port 4569. You have iax2.conf configured to allow a user to login. I would say ASL is setup and working. If your computer is on the same subnet as your ASL node. I would check: Windows Firewall Windows Anti-Virus Wireless access point turn off AP Isolation https://wiki.dd-wrt.com/wiki/index.php/Advanced_wireless_settings#AP_Isolat… Router turn any network Isolation https://wiki.dd-wrt.com/wiki/index.php/Guest_Network#Guest_Access_to_a_Netw… David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 29, 2018 at 2:00 PM, Mike Besemer <mwbesemer(a)cox.net> wrote: Here's what I've got so far. tracert reports 1 hop: 1 2ms 2ms 2ms RaspberryPi 192.168.x.x Android Phone connected to Verizon network: Good connect via the external IP Android Phone in Airplane mode connected to my wireless network: No connect Windows Computer connected to my wireless network: No connect So, it seems to be an internal/external IP issue rather than an Android/Windows issue - which is what I had originally thought. That should mean that the [stanza] in iaxrpt.conf and extensions.conf is correct - at least for the android phone. (The Android works on the external IP but not the internal IP, and that proves the stanzas are ok.) Tracert is reporting one hop from the Windows machine to the Pi - so the machines are seeing each other. Attached is a lousy photo of a netstat -pln run from the pi, but I don't know what I'm looking at. Mike WM4B From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David Shaw Sent: Friday, June 29, 2018 10:19 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] iaxrpt Most new routers won't allow you to exit the local network (LAN) and come back in. This might happen if you use a domain name that is associated with your public address. If you want to use your public domain name to access your node from inside your LAN. You'll need to add a DNS entry to your router. **See "Side Note" below By default IAX2 uses UDP port 4569 and the bind address is set to all interfaces/addresses in the ASL OS (allstarlink.org) As for the hamvoip.com settings, you should check with them. Are you using the hostname or IP address to access your node? Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices. Testing: >From your windows based computer. Try tracert and the IPaddress of the node. tracert 192.168.x.x 1 <1 ms <1 ms <1 ms 192.168.x.x There should be only one hope to your node if your windows computer in on the same network. Side note: I use dhcp on all my nodes on my LAN networks. I give them static address via the DHCP server. I also change the hostname on the node. i.e. asl2060 This allows the router's internal DNS server to associate the hostname and IP address for the ASL node. Some routers will allow you to add a domain name. Also there is no need to open TCP port forwarding on you router for IAX2 4569. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer(a)cox.net> wrote: No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet. Mike WM4B On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: Did you add your local node address for each node in the rpt,conf [nodes] stanza? Thanks, Bob K6ECM 73 On Jun 28, 2018, at 6:12 PM, Mike <mm(a)midnighteng.com> wrote: Mike, Still a lot of possibilities of things that may not be right but, Just so that you are conducting a 'good test' behind your nat through wifi, put your phone in airplane mode, then turn just the wifi on and connect. You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect, guessing your using the android iaxrpt.... like this for your IP... 192.169.1.101:4569 < :port especially if not the norm, but do it anyway. That's a few things to investigate anyway, Let me know if your still having issues. Oh... don't forget to get back out of airplane mode / turn cellular back on when done. Hate to see ya late for dinner ...lol ...mike/kb8jnm On 6/28/2018 8:00 PM, Mike Besemer wrote: Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address. I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com and have double checked everything. The port is open for both UDP and TCP connections. The firewall seems ok. It has to be something obvious. What did I miss? Mike WM4B _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Re: [App_rpt-users] iaxrpt
by Mike Besemer 29 Jun '18

29 Jun '18

Here's what I've got so far. tracert reports 1 hop: 1 2ms 2ms 2ms RaspberryPi 192.168.x.x Android Phone connected to Verizon network: Good connect via the external IP Android Phone in Airplane mode connected to my wireless network: No connect Windows Computer connected to my wireless network: No connect So, it seems to be an internal/external IP issue rather than an Android/Windows issue - which is what I had originally thought. That should mean that the [stanza] in iaxrpt.conf and extensions.conf is correct - at least for the android phone. (The Android works on the external IP but not the internal IP, and that proves the stanzas are ok.) Tracert is reporting one hop from the Windows machine to the Pi - so the machines are seeing each other. Attached is a lousy photo of a netstat -pln run from the pi, but I don't know what I'm looking at. Mike WM4B From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David Shaw Sent: Friday, June 29, 2018 10:19 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] iaxrpt Most new routers won't allow you to exit the local network (LAN) and come back in. This might happen if you use a domain name that is associated with your public address. If you want to use your public domain name to access your node from inside your LAN. You'll need to add a DNS entry to your router. **See "Side Note" below By default IAX2 uses UDP port 4569 and the bind address is set to all interfaces/addresses in the ASL OS (allstarlink.org) As for the hamvoip.com settings, you should check with them. Are you using the hostname or IP address to access your node? Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices. Testing: >From your windows based computer. Try tracert and the IPaddress of the node. tracert 192.168.x.x 1 <1 ms <1 ms <1 ms 192.168.x.x There should be only one hope to your node if your windows computer in on the same network. Side note: I use dhcp on all my nodes on my LAN networks. I give them static address via the DHCP server. I also change the hostname on the node. i.e. asl2060 This allows the router's internal DNS server to associate the hostname and IP address for the ASL node. Some routers will allow you to add a domain name. Also there is no need to open TCP port forwarding on you router for IAX2 4569. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer(a)cox.net> wrote: No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet. Mike WM4B On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: Did you add your local node address for each node in the rpt,conf [nodes] stanza? Thanks, Bob K6ECM 73 On Jun 28, 2018, at 6:12 PM, Mike <mm(a)midnighteng.com> wrote: Mike, Still a lot of possibilities of things that may not be right but, Just so that you are conducting a 'good test' behind your nat through wifi, put your phone in airplane mode, then turn just the wifi on and connect. You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect, guessing your using the android iaxrpt.... like this for your IP... 192.169.1.101:4569 < :port especially if not the norm, but do it anyway. That's a few things to investigate anyway, Let me know if your still having issues. Oh... don't forget to get back out of airplane mode / turn cellular back on when done. Hate to see ya late for dinner ...lol ...mike/kb8jnm On 6/28/2018 8:00 PM, Mike Besemer wrote: Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address. I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com and have double checked everything. The port is open for both UDP and TCP connections. The firewall seems ok. It has to be something obvious. What did I miss? Mike WM4B _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Re: [App_rpt-users] iaxrpt
by Mike Besemer 29 Jun '18

29 Jun '18

Sitting in front of it now. [Nodes] 48166 = radio@127.0.0.1:4569/48166,NONE That’s it. Are you saying I need the local IP of the Windows computer entered there? Mike WM4B From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob Pyke Sent: Friday, June 29, 2018 3:21 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] iaxrpt ASL is setup to look for public domain IP addresses. To connect a local IP address I.e. 192... to a 192.. you need to tell the other node which local address is used by the other node. This is entered in the rpt.config file in the [nodes] stanza. Thanks, Bob K6ECM 73 On Jun 29, 2018, at 9:26 AM, mwbesemer(a)cox.net wrote: Correct. I have my account configured for a private (internal) connection on 192.xxx.xxx.xxx and for a public (external) connection on 174.xxx.xxx.xxx. The 174.xxx.xxx.xxx works fine, but not the 192.xxx.xxx.xxx. Will troubleshoot further as soon as the boss lets me go home ! Tnx, Mike WM4B On Fri, Jun 29, 2018 at 12:16 PM, David Shaw wrote: If your using a public domain name then yes. If you are using your LAN IP address for your node, then no. Good to see your using your DHCP server to assign a fixed IP address. So you should be going straight to your node then. Private IP Adresses Network 10.0.0.0 - 10.255.255.255 172.16.0.0 - 172.31.255.255 192.168.0.0 - 192.168.255.255 If your IP Address is outside the above ranges then it's on the public (WWW) domain. W9SH Steve's iaxRpt software: Options>Accounts Host: Just use the IP Address only. No need for the default port. (4569) The only time you would use :port is if it was different then 4569. Options>Preferences>IAX2 is where you can change the default port. When you click Connect what error do you get on the bottom? You can also see what asterisk is seeing when you try to login. sudo asterisk -vvvvvvvvvvvvvvr Here is my output when I login asl2083*CLI> -- Accepting AUTHENTICATED call from 172.16.11.10: > requested format = gsm, > requested prefs = (), > actual format = gsm, > host prefs = (ulaw|adpcm|gsm), > priority = mine -- Executing [2083@iaxrpt:1] Rpt("IAX2/iaxrpt-6838", "2083|X") in new stack Node Variable dump for node 2083: RPT_NUMLINKS=0 RPT_LINKS=0 RPT_NUMALINKS=0 RPT_ALINKS=0 RPT_TXKEYED=0 RPT_ETXKEYED=0 RPT_RXKEYED=0 RPT_AUTOPATCHUP=0 -- 8 variables == Spawn extension (iaxrpt, 2083, 1) exited KEEPALIVE on 'IAX2/iaxrpt-6838' Here is the output of a bad login. Wrong Username asl2083*CLI> [Jun 29 09:01:43] NOTICE[411]: chan_iax2.c:9459 socket_process: Host 172.16.11.10 failed to authenticate as iaxrpt1 You can also use tcpdump to see connections to and from your node. sudo apt-get install tcpdump After tcpdump is installed run sudo tcpdump -n "src host 172.16.11.10 and port 4569" or sudo tcpdump -n "src host 172.16.11.10 and not dst port 22" replace 172.16.11.10 with your windows IP address. Ctrl c to stop David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 29, 2018 at 7:49 AM, < mwbesemer(a)cox.net> wrote: David, WRT your first statement, if I'm connecting via my Windows machine to my local IP, am I really exiting my LAN and coming back in? Or am I routing straight to the IP of my node. I have DD-WRT on my router have have the port forwarded. (I really expect my problem to be there - port forwarding has historically bit me in the butt.) BTW, my node is set for DHCP, but in the router, I have that MAC address assigned to a fixed IP address. I've tried using xxx.xxx.xxx.xxx:4569 and that doesn't help. I probably confused people by referencing the hamvoip document. I'm using ASL, but the hamvoip document was recommend to me as a guide to set up iaxrpt on my node. I'll try the traccert tonight when I get home. Many thanks, Mike WM4B On Fri, Jun 29, 2018 at 10:18 AM, David Shaw wrote: Most new routers won't allow you to exit the local network (LAN) and come back in. This might happen if you use a domain name that is associated with your public address. If you want to use your public domain name to access your node from inside your LAN. You'll need to add a DNS entry to your router. **See "Side Note" below By default IAX2 uses UDP port 4569 and the bind address is set to all interfaces/addresses in the ASL OS ( allstarlink.org) As for the hamvoip.com settings, you should check with them. Are you using the hostname or IP address to access your node? Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices. Testing: >From your windows based computer. Try tracert and the IPaddress of the node. tracert 192.168.x.x 1 <1 ms <1 ms <1 ms 192.168.x.x There should be only one hope to your node if your windows computer in on the same network. Side note: I use dhcp on all my nodes on my LAN networks. I give them static address via the DHCP server. I also change the hostname on the node. i.e. asl2060 This allows the router's internal DNS server to associate the hostname and IP address for the ASL node. Some routers will allow you to add a domain name. Also there is no need to open TCP port forwarding on you router for IAX2 4569. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 29, 2018 at 3:58 AM, < mwbesemer(a)cox.net> wrote: No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet. Mike WM4B On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: Did you add your local node address for each node in the rpt,conf [nodes] stanza? Thanks, Bob K6ECM 73 On Jun 28, 2018, at 6:12 PM, Mike < mm(a)midnighteng.com> wrote: Mike, Still a lot of possibilities of things that may not be right but, Just so that you are conducting a 'good test' behind your nat through wifi, put your phone in airplane mode, then turn just the wifi on and connect. You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect, guessing your using the android iaxrpt.... like this for your IP... 192.169.1.101:4569 < :port especially if not the norm, but do it anyway. That's a few things to investigate anyway, Let me know if your still having issues. Oh... don't forget to get back out of airplane mode / turn cellular back on when done. Hate to see ya late for dinner ...lol ...mike/kb8jnm On 6/28/2018 8:00 PM, Mike Besemer wrote: Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address. I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.comand have double checked everything. The port is open for both UDP and TCP connections. The firewall seems ok. It has to be something obvious. What did I miss? Mike WM4B ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-usersand scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ----------------------------- - ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ----------------------------- - ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-usersand scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-usersand scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Re: [App_rpt-users] iaxrpt
by mwbesemer＠cox.net 29 Jun '18

29 Jun '18

Correct. I have my account configured for a private (internal) connection on 192.xxx.xxx.xxx and for a public (external) connection on 174.xxx.xxx.xxx. The 174.xxx.xxx.xxx works fine, but not the 192.xxx.xxx.xxx. Will troubleshoot further as soon as the boss lets me go home ! Tnx, Mike WM4B On Fri, Jun 29, 2018 at 12:16 PM, David Shaw wrote: If your using a public domain name then yes. If you are using your LAN IP address for your node, then no. Good to see your using your DHCP server to assign a fixed IP address. So you should be going straight to your node then. Private IP Adresses Network 10.0.0.0 - 10.255.255.255 172.16.0.0 - 172.31.255.255 192.168.0.0 - 192.168.255.255 If your IP Address is outside the above ranges then it's on the public (WWW) domain. W9SH Steve's iaxRpt software: Options>Accounts Host: Just use the IP Address only. No need for the default port. (4569) The only time you would use :port is if it was different then 4569. Options>Preferences>IAX2 is where you can change the default port. When you click Connect what error do you get on the bottom? You can also see what asterisk is seeing when you try to login. sudo asterisk -vvvvvvvvvvvvvvr Here is my output when I login asl2083*CLI> -- Accepting AUTHENTICATED call from 172.16.11.10 <http://172.16.11.10> : <http://172.16.11.10> > requested format = gsm, <http://172.16.11.10> > requested prefs = (), <http://172.16.11.10> > actual format = gsm, <http://172.16.11.10> > host prefs = (ulaw|adpcm|gsm), <http://172.16.11.10> > priority = mine <http://172.16.11.10> -- Executing [2083@iaxrpt:1] Rpt("IAX2/iaxrpt-6838", "2083|X") in new stack <http://172.16.11.10> Node Variable dump for node 2083: <http://172.16.11.10> RPT_NUMLINKS=0 <http://172.16.11.10> RPT_LINKS=0 <http://172.16.11.10> RPT_NUMALINKS=0 <http://172.16.11.10> RPT_ALINKS=0 <http://172.16.11.10> RPT_TXKEYED=0 <http://172.16.11.10> RPT_ETXKEYED=0 <http://172.16.11.10> RPT_RXKEYED=0 <http://172.16.11.10> RPT_AUTOPATCHUP=0 <http://172.16.11.10> -- 8 variables <http://172.16.11.10> == Spawn extension (iaxrpt, 2083, 1) exited KEEPALIVE on 'IAX2/iaxrpt-6838' <http://172.16.11.10> <http://172.16.11.10> Here is the output of a bad login. Wrong Username <http://172.16.11.10> asl2083*CLI> <http://172.16.11.10> [Jun 29 09:01:43] NOTICE[411]: chan_iax2.c:9459 socket_process: Host 172.16.11.10 failed to authenticate as iaxrpt1 <http://172.16.11.10> <http://172.16.11.10> <http://172.16.11.10> You can also use tcpdump to see connections to and from your node. <http://172.16.11.10> <http://172.16.11.10> sudo apt-get install tcpdump <http://172.16.11.10> <http://172.16.11.10> After tcpdump is installed run <http://172.16.11.10> <http://172.16.11.10> sudo tcpdump -n "src host 172.16.11.10 and port 4569" <http://172.16.11.10> or <http://172.16.11.10> sudo tcpdump -n "src host 172.16.11.10 and not dst port 22" <http://172.16.11.10> <http://172.16.11.10> replace 172.16.11.10 with your windows IP address. <http://172.16.11.10> <http://172.16.11.10> Ctrl c to stop <http://172.16.11.10> <http://172.16.11.10> David <http://172.16.11.10> <http://172.16.11.10> <http://172.16.11.10> -- <http://172.16.11.10> Thanks, David <http://172.16.11.10> <http://172.16.11.10> "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." <http://172.16.11.10> Thomas Jefferson <http://172.16.11.10> On Fri, Jun 29, 2018 at 7:49 AM, < mwbesemer(a)cox.net <javascript:parent.wgMail.openComposeWindow('mwbesemer(a)cox.net')> > wrote: David, WRT your first statement, if I'm connecting via my Windows machine to my local IP, am I really exiting my LAN and coming back in? Or am I routing straight to the IP of my node. I have DD-WRT on my router have have the port forwarded. (I really expect my problem to be there - port forwarding has historically bit me in the butt.) BTW, my node is set for DHCP, but in the router, I have that MAC address assigned to a fixed IP address. I've tried using xxx.xxx.xxx.xxx:4569 and that doesn't help. I probably confused people by referencing the hamvoip document. I'm using ASL, but the hamvoip document was recommend to me as a guide to set up iaxrpt on my node. I'll try the traccert tonight when I get home. Many thanks, Mike WM4B On Fri, Jun 29, 2018 at 10:18 AM, David Shaw wrote: <javascript:parent.wgMail.openComposeWindow('mwbesemer(a)cox.net')> Most new routers won't allow you to exit the local network (LAN) and come back in. This might happen if you use a domain name that is associated with your public address. If you want to use your public domain name to access your node from inside your LAN. You'll need to add a DNS entry to your router. **See "Side Note" below By default IAX2 uses UDP port 4569 and the bind address is set to all interfaces/addresses in the ASL OS ( allstarlink.org <http://allstarlink.org> ). As for the hamvoip.com <http://hamvoip.com> settings, you should check with them. Are you using the hostname or IP address to access your node? Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices. Testing: From your windows based computer. Try tracert and the IPaddress of the node. tracert 192.168.x.x 1 <1 ms <1 ms <1 ms 192.168.x.x There should be only one hope to your node if your windows computer in on the same network. Side note: I use dhcp on all my nodes on my LAN networks. I give them static address via the DHCP server. I also change the hostname on the node. i.e. asl2060 This allows the router's internal DNS server to associate the hostname and IP address for the ASL node. Some routers will allow you to add a domain name. Also there is no need to open TCP port forwarding on you router for IAX2 4569. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson <http://hamvoip.com> On Fri, Jun 29, 2018 at 3:58 AM, < mwbesemer(a)cox.net <javascript:parent.wgMail.openComposeWindow('mwbesemer(a)cox.net')> > wrote: No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet. Mike WM4B On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: Did you add your local node address for each node in the rpt,conf [nodes] stanza? Thanks, Bob K6ECM 73 On Jun 28, 2018, at 6:12 PM, Mike < mm(a)midnighteng.com <javascript:parent.wgMail.openComposeWindow('mm(a)midnighteng.com')> > wrote: Mike, Still a lot of possibilities of things that may not be right but, Just so that you are conducting a 'good test' behind your nat through wifi, put your phone in airplane mode, then turn just the wifi on and connect. You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect, guessing your using the android iaxrpt.... like this for your IP... 192.169.1.101:4569 <http://192.169.1.101:4569> < :port especially if not the norm, but do it anyway. That's a few things to investigate anyway, Let me know if your still having issues. Oh... don't forget to get back out of airplane mode / turn cellular back on when done. Hate to see ya late for dinner ...lol ...mike/kb8jnm On 6/28/2018 8:00 PM, Mike Besemer wrote: Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address. I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com <http://hamvoip.com> and have double checked everything. The port is open for both UDP and TCP connections. The firewall seems ok. It has to be something obvious. What did I miss? Mike WM4B ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org <javascript:parent.wgMail.openComposeWindow('App_rpt-users(a)lists.allstarlink.org')> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org <javascript:parent.wgMail.openComposeWindow('App_rpt-users(a)lists.allstarlink.org')> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ----------------------------- - ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org <javascript:parent.wgMail.openComposeWindow('App_rpt-users(a)lists.allstarlink.org')> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://lists.allstarlink.org/c <http://lists.allstarlink.org/c> gi-bin/mailman/listinfo/app_rp t-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org <javascript:parent.wgMail.openComposeWindow('App_rpt-users(a)lists.allstarlink.org')> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://lists.allstarlink.org/c <http://lists.allstarlink.org/c> gi-bin/mailman/listinfo/app_rp t-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ----------------------------- - ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org <javascript:parent.wgMail.openComposeWindow('App_rpt-users(a)lists.allstarlink.org')> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> ______________________________ _________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlin k.org <javascript:parent.wgMail.openComposeWindow('App_rpt-users(a)lists.allstarlink.org')> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org <javascript:parent.wgMail.openComposeWindow('App_rpt-users(a)lists.allstarlink.org')> <javascript:parent.wgMail.openComposeWindow('App_rpt-users(a)lists.allstarlink.org')> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1