April 2018 - App_rpt-users - lists.keekles.org

Link audio level
by K5CG 19 Jun '18

19 Jun '18

I'm trying to lower the audio level from the link to my RF repeater and I'm not seeing the linkmongain setting making a lick of difference. I have tried -6, -10, -20 and now have... linkmongain=-999 ...in the node section below Audio level settings and above Dial Plan settings but there is no change. I wold expect this value to mute it completely on my transmitter audio. http://docs.allstarlink.org/drupal/node/71 Asterisk 1.4.23-pre.hamvoip-V1.5.3-28- app_rpt-0.327 -04/05/2018 (should be OK, right?) Linux allstar 4.4.44-1-ARCH #1 SMP Mon Jan 23 19:01:18 MST 2017 armv7l GNU/Linux What have I done incorrectly? Thanks Danny K5CG

12 14

Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
by K5CG 15 Jun '18

15 Jun '18

Starting over. Brand new Pi 3 B + Formatted microSD card with SD Formatter. Re-flashed microSD card with Win32 Disk Imager Booted, "Resized root filesystem... rebooting" Logged in as repeater Changed password for "repeater" user sudo su - to become root passwd to set root user password Edited /etc/ssh/sshd_config to enable root login systemctl restart ssh to refresh sshd config ip addr 192.168.1.225/24 (from DHCP) ssh to 192.168.1.225 as root user root@repeater:~# apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel raspberrypi-kernel-headers set on hold. raspberrypi-kernel set on hold. root@repeater:~# apt-get update Fetched 11.9 MB in 8s (1,361 kB/s) Reading package lists... Done root@repeater:~# apt-get upgrade -y Preparing... Unpacking... Yadda yadda... Setting up linux-libc-dev:armhf (4.9.82-1+deb9u3+rpi1) ... Setting up libicu57:armhf (57.1-6+deb9u2) ... Setting up raspi-config (20180406+1) ... Setting up perl (5.24.1-3+deb9u3) ... Setting up libssl1.0.2:armhf (1.0.2l-2+deb9u3) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up libssl1.1:armhf (1.1.0f-3+deb9u2) ... Processing triggers for systemd (232-25+deb9u2) ... Setting up openssl (1.1.0f-3+deb9u2) ... Processing triggers for man-db (2.7.6.1-2) ... Setting up asl-asterisk-tools (1.01-20180226-10) ... Setting up libraspberrypi0 (1.20180417-1) ... Setting up libraspberrypi-doc (1.20180417-1) ... Setting up libraspberrypi-dev (1.20180417-1) ... Setting up libraspberrypi-bin (1.20180417-1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... root@repeater:~# reboot Now that the initial steps are done, do I run asl-menu as the user repeater or root? The readme isn't specific. From: "Steve Zingman" <szingman(a)msgstor.com> To: "Users of Asterisk app_rpt" <app_rpt-users(a)lists.allstarlink.org> Sent: Friday, April 20, 2018 1:12:01 PM Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01 Danny, Did you do this before asl-menu? sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot Steve N4IRS On 4/20/2018 2:09 PM, K5CG wrote: I downloaded the raspberry pi latest [ http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228… | http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228… ] I followed the included readme file instructions and It booted fine but the asl-menu does not work correctly for the networking (static IP), and it doesn't set the hostname or domain name. After rebooting at the end of the process everything is the same as it was. Hostname is still "repeater" and IP is still DHCP. I seem to recall having this issue before on an older build. Is there a trick to get this to work or must it be done manually? Danny K5CG _______________________________________________ App_rpt-users mailing list [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users(a)lists.allstarlink.org ] [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

3 3

Send text Commands to Echolink
by Jeffrey Lehman, KC8QCH 02 Jun '18

02 Jun '18

HI all, This may have been asked before and may be a silly question, but is it possible to send text commands to Echolink? I have an Allstar Node that connects to an Echolink conference fulltime. Is there a way to send conference command to the conference from the allstar node? Or am I just dreaming which is possible too. thanks :) Jeff -- Jeff Lehman, KC8QCH https://kc8qch.ddns.net kc8qch(a)gmail.com Webmaster Hamilton County ARPSC https://www.hamcoarpsc.org hamcoarpsc(a)gmail.com AllStar 47374 Node Administrator World Wide Amateur Radio Guild https://theguildglobal.org

2 1

Re: [App_rpt-users] Errors
by John Rudolph- N2YP 30 Apr '18

30 Apr '18

The issue has been found and fixed. I ended up with a duplicate stanza heading [46101] which broke everything apparently. Removed that and all is back to normal. I'm really surprised that that item broke so much. John Rudolph Amateur Radio Op N2YP Unadilla,NY On April 29, 2018 12:00:01 PM EDT, app_rpt-users-request(a)lists.allstarlink.org wrote: >Send App_rpt-users mailing list submissions to > app_rpt-users(a)lists.allstarlink.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)lists.allstarlink.org > >You can reach the person managing the list at > app_rpt-users-owner(a)lists.allstarlink.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of App_rpt-users digest..." > >This site is dedicated to the memory of Jim Dixon WB6NIL > > >Today's Topics: > > 1. Errors (John Rudolph- N2YP) > 2. Re: Errors (Steve Zingman) > 3. Re: Errors (Tim Sawyer) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Sat, 28 Apr 2018 22:52:20 -0400 >From: John Rudolph- N2YP <John(a)n2yp.com> >To: app_rpt-users(a)lists.allstarlink.org >Subject: [App_rpt-users] Errors >Message-ID: <F405D071-964E-4C75-B085-1FE1BCAF4905(a)n2yp.com> >Content-Type: text/plain; charset="utf-8" > >I have a multi node x86 ASL Asterisk 1.01 system up and running. Today >I went to add a puesdo/dahdi hub and just made a additions to rpt.conf >and iax.conf, and went and rebooted Asterisk and or the whole system >and even though I love undone the "new" node the system is broke. My >URI'S no longer get a heartbeat but show via lsusb, I can't access >Asterisk CLI- get "Unable to connect to remote asterisk (does >/var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access >radio-tune-menu - get "Error parsing device parameters", nodes no >longer register with ASL, allmon2 can't access Asterisk manager, and my >EchoLink node shows active but you can't access it. After multiple >reboots I did try apt get update and upgrade with no success. Dahdi >and crc_ccitt show running and nothing shows in the asterisk log other >than it starting the nodes. > >What I don't understand is that I did nothing at all other than add a >stanza for another node and uncomment that node number in iax.conf and >restart. If someone could walk me through trouble shooting this I would >appreciate it so I can learn what went wrong. >John Rudolph >Amateur Radio Op N2YP >Unadilla,NY >

5 4

Re: [App_rpt-users] Errors
by John Rudolph- N2YP 29 Apr '18

29 Apr '18

Tim when running the command as suggested here is what I get. AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version 004b9dd Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others. Created by Mark Spencer <markster(a)digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Asterisk Event Logger Started /var/log/asterisk/event_log Asterisk Dynamic Loader Starting: [Apr 29 17:50:16] NOTICE[27387]: dnsmgr.c:394 do_reload: Managed DNS entries will be refreshed every 300 seconds. == Manager registered action Ping == Manager registered action Events == Manager registered action Logoff == Manager registered action Hangup == Manager registered action Status == Manager registered action Setvar == Manager registered action Getvar == Manager registered action GetConfig == Manager registered action UpdateConfig == Manager registered action Redirect == Manager registered action Originate == Manager registered action Command == Manager registered action ExtensionState == Manager registered action AbsoluteTimeout == Manager registered action MailboxStatus == Manager registered action MailboxCount == Manager registered action ListCommands == Manager registered action UserEvent == Manager registered action WaitEvent Asterisk Management interface listening on port 5038 [Apr 29 17:50:16] NOTICE[27387]: cdr.c:1416 do_reload: CDR simple logging enabled. == RTP Allocating from port range 5000 -> 31000 == UDPTL allocating from port range 4500 -> 4999 Asterisk PBX Core Initializing Registering builtin applications: [Answer] == Registered application 'Answer' [BackGround] == Registered application 'BackGround' [Busy] == Registered application 'Busy' [Congestion] == Registered application 'Congestion' [Goto] == Registered application 'Goto' [GotoIf] == Registered application 'GotoIf' [GotoIfTime] == Registered application 'GotoIfTime' [ExecIfTime] == Registered application 'ExecIfTime' [Hangup] == Registered application 'Hangup' [NoOp] == Registered application 'NoOp' [Progress] == Registered application 'Progress' [ResetCDR] == Registered application 'ResetCDR' [Ringing] == Registered application 'Ringing' [SayNumber] == Registered application 'SayNumber' [SayDigits] == Registered application 'SayDigits' [SayAlpha] == Registered application 'SayAlpha' [SayPhonetic] == Registered application 'SayPhonetic' [SetAMAFlags] == Registered application 'SetAMAFlags' [SetGlobalVar] == Registered application 'SetGlobalVar' [Set] == Registered application 'Set' [ImportVar] == Registered application 'ImportVar' [Wait] == Registered application 'Wait' [WaitExten] == Registered application 'WaitExten' == Manager registered action DBGet == Manager registered action DBPut Asterisk Dynamic Loader Starting: [Apr 29 17:50:16] NOTICE[27387]: loader.c:874 load_modules: 57 modules will be loaded. res_adsi.so => (ADSI Resource) -- Loaded PUBLIC key 'freeworlddialup' -- Loaded PUBLIC key 'iaxtel' -- Loaded PUBLIC key 'allstar' res_crypto.so => (Cryptographic Digital Signatures) -- Registered extension context 'parkedcalls' -- Added extension '700' priority 1 to parkedcalls == Registered application 'ParkedCall' == Registered application 'Park' == Manager registered action ParkedCalls == Manager registered action Park res_features.so => (Call Features Resource) -- Registered indication country 'us' -- Registered indication country 'au' -- Registered indication country 'fr' -- Registered indication country 'de' -- Registered indication country 'nl' -- Registered indication country 'uk' -- Registered indication country 'fi' -- Registered indication country 'no' -- Setting default indication country to 'us' == Registered application 'PlayTones' == Registered application 'StopPlayTones' res_indications.so => (Indications Resource) == Registered application 'Authenticate' app_authenticate.so => (Authentication Application) == Registered application 'Dial' == Registered application 'RetryDial' app_dial.so => (Dialing Application) == Registered application 'Exec' == Registered application 'TryExec' == Registered application 'ExecIf' app_exec.so => (Executes dialplan applications) == Registered application 'MacroExit' == Registered application 'MacroIf' == Registered application 'MacroExclusive' == Registered application 'Macro' app_macro.so => (Extension Macros) == Registered application 'Playback' app_playback.so => (Sound File Playback Application) == Manager registered action RptLocalNodes == Manager registered action RptStatus == Registered application 'Rpt' == Registered application 'MDC1200Gen' app_rpt.so => (Radio Repeater/Remote Base Application) == Registered application 'SendText' app_sendtext.so => (Send Text Applications) == Registered application 'TrySystem' == Registered application 'System' app_system.so => (Generic System() application) == Registered application 'Transfer' app_transfer.so => (Transfer) -- Automatically generated pseudo channel == Registered channel type 'DAHDI' (DAHDI Telephony Driver) == Manager registered action DAHDITransfer == Manager registered action ZapTransfer == Manager registered action DAHDIHangup == Manager registered action ZapHangup == Manager registered action DAHDIDialOffHook == Manager registered action ZapDialOffHook == Manager registered action DAHDIDNDon == Manager registered action ZapDNDon == Manager registered action DAHDIDNDoff == Manager registered action ZapDNDoff == Manager registered action DAHDIShowChannels == Manager registered action ZapShowChannels == Manager registered action DAHDIRestart == Manager registered action ZapRestart chan_dahdi.so => (DAHDI Telephony) == Registered channel type 'echolink' (Echolink channel driver) chan_echolink.so => (echolink channel driver) == Registered custom function IAXPEER == Registered application 'IAX2Provision' == Manager registered action IAXpeers == Manager registered action IAXnetstats == Refreshing DNS lookups. == adding dns manager for 'register.allstarlink.org' == adding dns manager for 'register.allstarlink.org' == adding dns manager for 'register.allstarlink.org' == adding dns manager for 'register.allstarlink.org' == adding dns manager for 'register.allstarlink.org' == Using TOS bits 30 == Binding IAX2 to default address 0.0.0.0:4569 == Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2)) == 10 helper threads started == IAX Ready and Listening == Loaded firmware 'iaxy.bin' chan_iax2.so => (Inter Asterisk eXchange (Ver 2)) == Registered channel type 'Local' (Local Proxy Channel Driver) chan_local.so => (Local Proxy Channel (Note: used internally by other modules)) -- Registered IAX2 to '67.215.233.178', who sees us as 104.228.103.221:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 104.228.103.221:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 104.228.103.221:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 104.228.103.221:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 104.228.103.221:4569 with no messages waiting [Apr 29 17:50:17] WARNING[27387]: chan_usbradio.c:5377 store_config: File usbradio_tune_usb_46100.conf not found, using default parameters. [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1774 createPmrChannel: xpmr rxlpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1775 createPmrChannel: xpmr rxhpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1776 createPmrChannel: xpmr txlpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1777 createPmrChannel: xpmr txhpf: 0 ERROR: numrxcodes != numtxcodes [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1774 createPmrChannel: xpmr rxlpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1775 createPmrChannel: xpmr rxhpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1776 createPmrChannel: xpmr txlpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1777 createPmrChannel: xpmr txhpf: 0 ERROR: numrxcodes != numtxcodes [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1774 createPmrChannel: xpmr rxlpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1775 createPmrChannel: xpmr rxhpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1776 createPmrChannel: xpmr txlpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1777 createPmrChannel: xpmr txhpf: 0 ERROR: numrxcodes != numtxcodes [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1774 createPmrChannel: xpmr rxlpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1775 createPmrChannel: xpmr rxhpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1776 createPmrChannel: xpmr txlpf: 0 [Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1777 createPmrChannel: xpmr txhpf: 0 ERROR: numrxcodes != numtxcodes == Registered channel type 'Radio' (USB (CM108) Radio Channel Driver) chan_usbradio.so => (usb Console Channel Driver) == Registered translator 'adpcmtolin' from format adpcm to slin, cost 1 == Registered translator 'lintoadpcm' from format slin to adpcm, cost 1 codec_adpcm.so => (Adaptive Differential PCM Coder/Decoder) == Registered translator 'alawtolin' from format alaw to slin, cost 1 == Registered translator 'lintoalaw' from format slin to alaw, cost 1 codec_alaw.so => (A-law Coder/Decoder) == Registered translator 'alawtoulaw' from format alaw to ulaw, cost 1 == Registered translator 'ulawtoalaw' from format ulaw to alaw, cost 1 codec_a_mu.so => (A-law and Mulaw direct Coder/Decoder) == Registered translator 'g722tolin' from format g722 to slin, cost 1 == Registered translator 'lintog722' from format slin to g722, cost 1 codec_g722.so => (ITU G.722-64kbps G722 Transcoder) == Registered translator 'g726tolin' from format g726 to slin, cost 1 == Registered translator 'lintog726' from format slin to g726, cost 1 == Registered translator 'g726aal2tolin' from format g726aal2 to slin, cost 1 == Registered translator 'lintog726aal2' from format slin to g726aal2, cost 1 == Registered translator 'g726aal2tog726' from format g726aal2 to g726, cost 1 == Registered translator 'g726tog726aal2' from format g726 to g726aal2, cost 1 codec_g726.so => (ITU G.726-32kbps G726 Transcoder) == Registered translator 'gsmtolin' from format gsm to slin, cost 1 == Registered translator 'lintogsm' from format slin to gsm, cost 1 codec_gsm.so => (GSM Coder/Decoder) == Registered translator 'ulawtolin' from format ulaw to slin, cost 1 == Registered translator 'lintoulaw' from format slin to ulaw, cost 1 codec_ulaw.so => (mu-Law Coder/Decoder) == Registered translator 'ilbctolin' from format ilbc to slin, cost 3 == Registered translator 'lintoilbc' from format slin to ilbc, cost 6 codec_ilbc.so => (iLBC Coder/Decoder) == Registered file format g723sf, extension(s) g723|g723sf format_g723.so => (G.723.1 Simple Timestamp File Format) == Registered file format g726-40, extension(s) g726-40 == Registered file format g726-32, extension(s) g726-32 == Registered file format g726-24, extension(s) g726-24 == Registered file format g726-16, extension(s) g726-16 format_g726.so => (Raw G.726 (16/24/32/40kbps) data) == Registered file format g729, extension(s) g729 format_g729.so => (Raw G729 data) == Registered file format gsm, extension(s) gsm format_gsm.so => (Raw GSM data) == Registered file format h263, extension(s) h263 format_h263.so => (Raw H.263 data) == Registered file format h264, extension(s) h264 format_h264.so => (Raw H.264 data) == Registered file format iLBC, extension(s) ilbc format_ilbc.so => (Raw iLBC data) == Registered file format pcm, extension(s) pcm|ulaw|ul|mu == Registered file format alaw, extension(s) alaw|al == Registered file format au, extension(s) au == Registered file format g722, extension(s) g722 format_pcm.so => (Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G.722 16Khz) == Registered file format sln, extension(s) sln|raw format_sln.so => (Raw Signed Linear Audio support (SLN)) == Registered file format vox, extension(s) vox format_vox.so => (Dialogic VOX (ADPCM) File Format) == Registered file format wav49, extension(s) WAV|wav49 format_wav_gsm.so => (Microsoft WAV format (Proprietary GSM)) == Registered file format wav, extension(s) wav format_wav.so => (Microsoft WAV format (8000Hz Signed Linear)) == Registered custom function BASE64_ENCODE == Registered custom function BASE64_DECODE func_base64.so => (base64 encode/decode dialplan functions) == Registered custom function CALLERID func_callerid.so => (Caller ID related dialplan function) == Registered custom function CDR func_cdr.so => (CDR dialplan function) == Registered custom function CHANNEL func_channel.so => (Channel information dialplan function) == Registered custom function CURL func_curl.so => (Load external URL) == Registered custom function CUT == Registered custom function SORT func_cut.so => (Cut out information from a string) == Registered custom function DB == Registered custom function DB_EXISTS == Registered custom function DB_DELETE func_db.so => (Database (astdb) related dialplan functions) == Registered custom function ENUMLOOKUP == Registered custom function TXTCIDNAME func_enum.so => (ENUM related dialplan functions) == Registered custom function ENV == Registered custom function STAT func_env.so => (Environment/filesystem dialplan functions) == Registered custom function GLOBAL func_global.so => (Global variable dialplan functions) == Registered custom function GROUP_COUNT == Registered custom function GROUP_MATCH_COUNT == Registered custom function GROUP_LIST == Registered custom function GROUP func_groupcount.so => (Channel group dialplan functions) == Registered custom function LANGUAGE func_language.so => (Channel language dialplan function) == Registered custom function ISNULL == Registered custom function SET == Registered custom function EXISTS == Registered custom function IF == Registered custom function IFTIME func_logic.so => (Logical dialplan functions) == Registered custom function MATH func_math.so => (Mathematical dialplan function) == Registered custom function MD5 == Registered custom function CHECK_MD5 func_md5.so => (MD5 digest dialplan functions) == Registered custom function MUSICCLASS func_moh.so => (Music-on-hold dialplan function) == Registered custom function RAND func_rand.so => (Random number dialplan function) == Registered custom function REALTIME func_realtime.so => (Read/Write values from a RealTime repository) == Setting global variable 'HOMENPA' to '607' -- Registered extension context 'default' -- Added extension 'i' priority 1 to default -- Registered extension context 'radio-gui' -- Added extension '46100' priority 1 to radio-gui -- Added extension '46101' priority 1 to radio-gui -- Added extension '46109' priority 1 to radio-gui -- Added extension '46110' priority 1 to radio-gui -- Added extension '46111' priority 1 to radio-gui -- Added extension '46112' priority 1 to radio-gui -- Registered extension context 'radio-iaxrpt' -- Added extension '46100' priority 1 to radio-iaxrpt -- Added extension '46101' priority 1 to radio-iaxrpt -- Added extension '46109' priority 1 to radio-iaxrpt -- Added extension '46110' priority 1 to radio-iaxrpt -- Added extension '46111' priority 1 to radio-iaxrpt -- Added extension '46112' priority 1 to radio-iaxrpt -- Registered extension context 'radio-secure' -- Added extension '46100' priority 1 to radio-secure -- Added extension '46101' priority 1 to radio-secure -- Added extension '46109' priority 1 to radio-secure -- Added extension '46110' priority 1 to radio-secure -- Added extension '46111' priority 1 to radio-secure -- Added extension '46112' priority 1 to radio-secure -- Registered extension context 'radio-secure-proxy' -- Added extension '46100' priority 1 to radio-secure-proxy -- Added extension '46101' priority 1 to radio-secure-proxy -- Added extension '46109' priority 1 to radio-secure-proxy -- Added extension '46110' priority 1 to radio-secure-proxy -- Added extension '46111' priority 1 to radio-secure-proxy -- Added extension '46112' priority 1 to radio-secure-proxy -- Added extension '_0X.' priority 1 to radio-secure-proxy -- Registered extension context 'pstn-out' -- Added extension '_NXXNXXXXXX' priority 1 to pstn-out -- Added extension '_NXXNXXXXXX' priority 2 to pstn-out -- Registered extension context 'invalidnum' -- Added extension 's' priority 1 to invalidnum -- Added extension 's' priority 2 to invalidnum -- Added extension 's' priority 3 to invalidnum -- Added extension 's' priority 4 to invalidnum -- Registered extension context 'radio' -- Added extension '_X11' priority 1 to radio -- Added extension '_NXXXXXX' priority 1 to radio -- Added extension '_1XXXXXXXXXX' priority 1 to radio -- Added extension '_07XX' priority 1 to radio -- Added extension '00' priority 1 to radio -- Registered extension context 'check_route' -- Added extension '_1800NXXXXXX' priority 2 to check_route -- Added extension '_1888NXXXXXX' priority 2 to check_route -- Added extension '_1877NXXXXXX' priority 2 to check_route -- Added extension '_1866NXXXXXX' priority 2 to check_route -- Added extension '_1855NXXXXXX' priority 2 to check_route -- Added extension '_1X00XXXXXXX' priority 2 to check_route -- Added extension '_1X11XXXXXXX' priority 2 to check_route -- Added extension '_X11' priority 2 to check_route -- Added extension '_1NXX555XXXX' priority 2 to check_route -- Added extension '_1NXX976XXXX' priority 2 to check_route -- Added extension '_1809XXXXXXX' priority 2 to check_route -- Added extension '_1900XXXXXXX' priority 2 to check_route -- Added extension '_1NXXXXXXXXX' priority 1 to check_route -- Added extension '_X.' priority 2 to check_route -- Registered extension context 'my-ip' -- Added extension 's' priority 1 to my-ip -- Added extension 's' priority 2 to my-ip -- Added extension 's' priority 3 to my-ip -- Added extension 's' priority 4 to my-ip -- Registered extension context 'allstar-sys' -- Added extension '0' priority 1 to allstar-sys -- Added extension '0' priority 2 to allstar-sys -- Added extension '0' priority 3 to allstar-sys -- Added extension '_0.' priority 1 to allstar-sys -- Added extension '_0.' priority 2 to allstar-sys -- Added extension '_0.' priority 3 to allstar-sys -- Added extension '_1.' priority 1 to allstar-sys -- Added extension '_1.' priority 2 to allstar-sys -- Added extension '_2.' priority 1 to allstar-sys -- Added extension '_2.' priority 2 to allstar-sys -- Added extension '_2.' priority 3 to allstar-sys -- Added extension '_2.' priority 4 to allstar-sys -- Added extension '_2.' priority 5 to allstar-sys -- Added extension '_2.' priority 6 to allstar-sys -- Added extension '_2.' priority 7 to allstar-sys -- Added extension '_3.' priority 1 to allstar-sys -- Added extension '_3.' priority 2 to allstar-sys -- Added extension '_3.' priority 3 to allstar-sys -- Added extension '_3.' priority 4 to allstar-sys -- Added extension '_3.' priority 5 to allstar-sys -- Added extension '_3.' priority 6 to allstar-sys -- Added extension '_3.' priority 7 to allstar-sys -- Added extension '_4.' priority 1 to allstar-sys -- Added extension '_4.' priority 2 to allstar-sys -- Added extension '_4.' priority 3 to allstar-sys -- Added extension '_4.' priority 4 to allstar-sys -- Added extension '_4.' priority 5 to allstar-sys -- Added extension '_4.' priority 6 to allstar-sys -- Added extension '_4.' priority 7 to allstar-sys -- Added extension '_5.' priority 1 to allstar-sys -- Added extension '_5.' priority 2 to allstar-sys -- Added extension '_5.' priority 3 to allstar-sys -- Added extension '_5.' priority 4 to allstar-sys -- Added extension '_5.' priority 5 to allstar-sys -- Added extension '_5.' priority 6 to allstar-sys -- Added extension '_5.' priority 7 to allstar-sys -- Registered extension context 'allstar-public' -- Added extension 's' priority 1 to allstar-public -- Added extension 's' priority 2 to allstar-public -- Added extension 's' priority 3 to allstar-public -- Added extension 's' priority 4 to allstar-public -- Added extension 's' priority 5 to allstar-public -- Added extension 's' priority 6 to allstar-public -- Added extension 's' priority 7 to allstar-public -- Added extension 's' priority 8 to allstar-public -- Added extension 's' priority 9 to allstar-public -- Added extension 's' priority 10 to allstar-public -- Added extension 's' priority 11 to allstar-public -- Added extension 's' priority 12 to allstar-public -- Added extension 's' priority 13 to allstar-public -- Added extension 's' priority 14 to allstar-public -- Added extension 's' priority 15 to allstar-public -- Added extension 's' priority 16 to allstar-public -- Added extension 's' priority 17 to allstar-public -- Added extension '9999' priority 1 to allstar-public pbx_config.so => (Text Extension Configuration) Asterisk Ready. -- Loading initial config for repeater 46101 [Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init 46101 -- Loading initial config for repeater 46100 [Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init 46100 -- Loading initial config for repeater 46101 [Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init 46101 -- Loading initial config for repeater 46109 [Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init 46109 -- Loading initial config for repeater 46110 [Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init 46110 -- Loading initial config for repeater 46111 [Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init 46111 -- Re-Loading config for repeater 46111 ERROR: numrxcodes != numtxcodes -- rpt (Rx) initiating call to Radio/usb_46111 on Radio/usb_46111 -- Re-Loading config for repeater 46109 -- rpt (Rx) initiating call to dahdi/pseudo on DAHDI/pseudo-1054379203 -- Re-Loading config for repeater 46101 ERROR: numrxcodes != numtxcodes -- rpt (Rx) initiating call to Radio/usb_46101 on Radio/usb_46101 -- Re-Loading config for repeater 46110 -- Re-Loading config for repeater 46100 ERROR: numrxcodes != numtxcodes -- rpt (Rx) initiating call to Radio/usb_46110 on Radio/usb_46110 -- Re-Loading config for repeater 46101 ERROR: numrxcodes != numtxcodes -- rpt (Rx) initiating call to Radio/usb_46100 on Radio/usb_46100 Segmentation fault John Rudolph Amateur Radio Op N2YP Unadilla,NY On April 29, 2018 12:00:01 PM EDT, app_rpt-users-request(a)lists.allstarlink.org wrote: >Send App_rpt-users mailing list submissions to > app_rpt-users(a)lists.allstarlink.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)lists.allstarlink.org > >You can reach the person managing the list at > app_rpt-users-owner(a)lists.allstarlink.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of App_rpt-users digest..." > >This site is dedicated to the memory of Jim Dixon WB6NIL > > >Today's Topics: > > 1. Errors (John Rudolph- N2YP) > 2. Re: Errors (Steve Zingman) > 3. Re: Errors (Tim Sawyer) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Sat, 28 Apr 2018 22:52:20 -0400 >From: John Rudolph- N2YP <John(a)n2yp.com> >To: app_rpt-users(a)lists.allstarlink.org >Subject: [App_rpt-users] Errors >Message-ID: <F405D071-964E-4C75-B085-1FE1BCAF4905(a)n2yp.com> >Content-Type: text/plain; charset="utf-8" > >I have a multi node x86 ASL Asterisk 1.01 system up and running. Today >I went to add a puesdo/dahdi hub and just made a additions to rpt.conf >and iax.conf, and went and rebooted Asterisk and or the whole system >and even though I love undone the "new" node the system is broke. My >URI'S no longer get a heartbeat but show via lsusb, I can't access >Asterisk CLI- get "Unable to connect to remote asterisk (does >/var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access >radio-tune-menu - get "Error parsing device parameters", nodes no >longer register with ASL, allmon2 can't access Asterisk manager, and my >EchoLink node shows active but you can't access it. After multiple >reboots I did try apt get update and upgrade with no success. Dahdi >and crc_ccitt show running and nothing shows in the asterisk log other >than it starting the nodes. > >What I don't understand is that I did nothing at all other than add a >stanza for another node and uncomment that node number in iax.conf and >restart. If someone could walk me through trouble shooting this I would >appreciate it so I can learn what went wrong. >John Rudolph >Amateur Radio Op N2YP >Unadilla,NY >

2 1

Re: [App_rpt-users] Errors
by John Rudolph- N2YP 29 Apr '18

29 Apr '18

Steve, nothing is showing in the messages file other than what's below. The xpmr has been happening for a few weeks and I just haven't had a chance to ask about it yet. [Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init 46101 [Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init 46100 _tune_usb_46100.conf not found, using default parameters. [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxlpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxhpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txlpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txhpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: John Rudolph Amateur Radio Op N2YP Unadilla,NY > >Step 1: >Check the log for errors: >it is in /var/log/asterisk the filename is messages > >Steve n4IRS > >On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote: >> I have a multi node x86 ASL Asterisk 1.01 system up and running. >Today >> I went to add a puesdo/dahdi hub and just made a additions to >rpt.conf >> and iax.conf, and went and rebooted Asterisk and or the whole system >> and even though I love undone the "new" node the system is broke. My >> URI'S no longer get a heartbeat but show via lsusb, I can't access >> Asterisk CLI- get "Unable to connect to remote asterisk (does >> /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access > >> radio-tune-menu - get "Error parsing device parameters", nodes no >> longer register with ASL, allmon2 can't access Asterisk manager, and >> my EchoLink node shows active but you can't access it. After multiple > >> reboots I did try apt get update and upgrade with no success. Dahdi >> and crc_ccitt show running and nothing shows in the asterisk log >other >> than it starting the nodes. >> >> What I don't understand is that I did nothing at all other than add a > >> stanza for another node and uncomment that node number in iax.conf >and >> restart. If someone could walk me through trouble shooting this I >> would appreciate it so I can learn what went wrong. >> John Rudolph >> Amateur Radio Op N2YP >> Unadilla,NY >> >> >> _______________________________________________ > >Message: 3 >Date: Sat, 28 Apr 2018 20:58:40 -0700 >From: Tim Sawyer <tisawyer(a)gmail.com> >To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> >Subject: Re: [App_rpt-users] Errors >Message-ID: > <CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ(a)mail.gmail.com> >Content-Type: text/plain; charset="utf-8" > >You probably fat fingered something. It happens to all of us. Start >Asterisk in the non-deamon mode by doing > >asterisk -fnvvv > >at the linux prompt and watch for errors. Press control-c to exit. Fix >error. Repeat until it starts clean. >

2 1

Can't log in to node...
by Sean McCarthy 29 Apr '18

29 Apr '18

Trying to log into my link and keep getting this... root(a)192.168.43.141's password: RPi2-3 Version 1.5rc4-18 Allstar - March 26, 2018 - KB4FXC, WA3DSP Last login: Sun Apr 29 15:30:21 2018 from 192.168.43.212 /usr/local/sbin/admin.sh: line 65: syntax error near unexpected token `)' /usr/local/sbin/admin.sh: line 65: `)' Connection to 192.168.43.141 closed. Any suggestions? Thanks, Sean

3 4

Errors
by John Rudolph- N2YP 28 Apr '18

28 Apr '18

I have a multi node x86 ASL Asterisk 1.01 system up and running. Today I went to add a puesdo/dahdi hub and just made a additions to rpt.conf and iax.conf, and went and rebooted Asterisk and or the whole system and even though I love undone the "new" node the system is broke. My URI'S no longer get a heartbeat but show via lsusb, I can't access Asterisk CLI- get "Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access radio-tune-menu - get "Error parsing device parameters", nodes no longer register with ASL, allmon2 can't access Asterisk manager, and my EchoLink node shows active but you can't access it. After multiple reboots I did try apt get update and upgrade with no success. Dahdi and crc_ccitt show running and nothing shows in the asterisk log other than it starting the nodes. What I don't understand is that I did nothing at all other than add a stanza for another node and uncomment that node number in iax.conf and restart. If someone could walk me through trouble shooting this I would appreciate it so I can learn what went wrong. John Rudolph Amateur Radio Op N2YP Unadilla,NY

3 2

Repeater Stuck Locked open for 18 hrs
by Loren Tedford 27 Apr '18

27 Apr '18

We had a scenario that occurred late Saturday night early Sunday Morning where the repeater locked its self wide open for over 18 hrs solid with no id’s according to witnesses I was away sleeping dealing with some medical on this end.. When we found out about it we immediately tuned to the frequency and found that the repeater was indeed locked open. I had Mark run out to the repeater site to shut it down and bring home the allstarlink box.. No signs of damage to motherboard ram or ssd we did look through the logs and couldn’t find anything that would even remotely cause a stuck ptt.. We were able to get the Archive directory downloaded since it was a separate drive and after looking through it.. Nothing showed their either.. Any ideas anyone? Anyone ever had this happen? This machine was Debian distro and was one of the earlier installations of the debian install .. It was up and running for almost 2 years no issues.. Reboots once every week. Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren(a)lorentedford.com Email: KC9ZHV(a)KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com

9 14

Rasberry Pi3
by Jeff Kennison 27 Apr '18

27 Apr '18

Just purchased Rasberry Pi3 and loaded OS. Im new to Allstar and am in need of someone to walk me thru the setup of software. Thank You Jeff Kennison kennisonjeff(a)gmail.com WB6IZC

3 4