April 2015 - App_rpt-users - lists.keekles.org

Registration issues
by Thor Wiegman 30 Nov '15

30 Nov '15

Tonight I had a user tell me that one of my nodes wouldn't connect anywhere. Verified, rebooted the server, still nothing. Tried running the rc.updatenodelist script manually and it just sits there. However, after running the following command I do get an update and can now connect to other nodes. /usr/bin/wget -O /var/lib/asterisk/rpt_extnodeshttp://nodes1.allstarlink.org/cgi-bin/nodes.pl When I checked two other nodes they had the same problem and same work-around. I ran that same command for nodes2 and it works. When I run it for nodes3 it times out. Could a problem with nodes3.allstarlink.org be causing the rc.updatenodelist script to choke? And could that have been causing my nodes to not be able to connect to others?

5 5

AllStar Asterisk on Raspberry Pi 1 and 2 UPDATED
by Steve Zingman 29 May '15

29 May '15

Correction: Updated links below I've updated the scripts and tar files for installing AllStar Asterisk on the Raspberry Pi platforms. The Pi 1 is at <https://github.com/N4IRS/AllStar/raw/master/rpi1.tar> The Pi 2 is at <https://github.com/N4IRS/AllStar/raw/master/rpi2.tar> All of the scripts, patches and platform specific files are at: <https://github.com/N4IRS/AllStar> 73, Steve N4IRS -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

3 2

All Star Link GPIO Odroid U3
by Luis Ceja Quiroz 29 Apr '15

29 Apr '15

I am trying to use All Star Link without modifying a cm 108 chip. I am trying to use the GPIO pins on the Odroid U3 expansion I/O board to control the repeater logic signals (COR/PTT) but all I could find was information on using either the GPIO pins on the cm108 fob (which must be modified to use) or using a parallel port. The Odroid U3 doesn't have a parallel port and I think the native GPIO pins should have the capacity to use the COR/PTT signals. I can't find any information on how to go about using the native GPIO pins on an sbc for All Star Link. Is there a way to do this? My thoughts on an approach to this: 1. create a driver or port that uses the GPIO pins as a parallel port 2. provide a memory address to the rpt.conf file that has a value corresponding to the GPIO status so that it may be read as a parallel port 3. alter the software to use native GPIO as another option as opposed to parallel port I am not sure how to approach any of these options. I think option 3 would be best but I don't know how this is possible. May i get some suggestions or help regarding this? Thanks!

6 5

Allmon does not show RTCM clients
by Yuri Belkin 29 Apr '15

29 Apr '15

Hello! I'm trying to launch allmon2 on my private node server linked with 2 RTCMs running in mix mode. It seems that allmon successfuly estabilishing connection to AMI, * is blinking but clients and voter bars are missing. RTCMs are connected to server and 'voter display 1234' showing RSSI bars properly. Here are parts of my .conf files rpt.conf[7700]rxchannel=voter/1234txchannel=zap/pseudo7700 = radio(a)127.0.0.1/7700,NONE voter.conf[general] port=667 buflen=180password=server_pass[1234]VOTER1=radio1VOTER2=radio2thresholds = 255,110=5linger=10 manager.conf[general]displaysystemname=yesenabled=yesport=5038[admin]secret=pass1234read = all,system,call,log,verbose,command,agent,user,configwrite = all,system,call,log,verbose,command,agent,user,config allmon.ini.php<?php[about]url=about.php[7700]host=127.0.0.1:5038user=adminpasswd=pass1234menu=yeshideNodeURL=no[break]menu=yes?> voter.ini.php<?php[1234]node=7700host=127.0.0.1:5038user=adminpasswd=pass1234?> What else has to be checked? Thanks!

2 7

Domain name help (slightly OT)
by Robert Newberry 28 Apr '15

28 Apr '15

Is there anyone in here that knows anything about domain names and dns services? I want to purchase a domain. I already run lsnodes and allmon2 on my home node. I want to be able to use that domain to be able to access those nodes. I would also like a simple webpage like word press to document my allstar activities. I notice a lot of list members have custom domains, I just want to make sure I purchase what I need. If you can help please contact me off list. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 74, Issue 37
by Steve Zingman 27 Apr '15

27 Apr '15

Shane, I see you are getting responses on the other list. If you still want to do it under Debian, feel free to e-mail direct or on the app_rpt list. 73, Steve N4IRS On 4/27/2015 12:00 PM, app_rpt-users-request(a)ohnosec.org wrote: > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 27 Apr 2015 15:44:54 +1000 > From: Shane Morris <edgecomberts(a)gmail.com> > To: app_rpt mailing list <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] The ARM app_rpt mailing list > Message-ID: > <CANZw+5cfZeKTRG=vQEuuRbnoXK0TFZmEEVed8cUdoAE0BxJTqQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi list, > > Can anyone point me in the direction of the signup page for the ARM > specific app_rpt list, as I am going to be making an app_rpt node on a > Banana Pro running Debian, and thought I should not clutter up the original > list with potentially off topic discussion. > > Many thanks! > > Shane. > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

The ARM app_rpt mailing list
by Steve Zingman 27 Apr '15

27 Apr '15

Shane, Sorry, formatting got me. The list you are asking about is at: <http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar> 73, Steve N4IRS >> Hi list, >> Can anyone point me in the direction of the signup page for the ARM >> specific app_rpt list, as I am going to be making an app_rpt node >> on a Banana Pro running Debian, and thought I should not clutter up >> the original list with potentially off topic discussion. >> Many thanks! >> Shane. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

The ARM app_rpt mailing list
by Steve Zingman 27 Apr '15

27 Apr '15

Shane, The list you are asking about is at <http://lists.hamvoip.org/cgi-bin /mailman/listinfo/arm-allstar> That list mostly deals with disk images built for the RPI2 and the BBB. There are quite a few people here that built AllStar Asterisk from base Debian installs. I've created some scripts and documentation specific to installing AllStar Asterisk on Debian, including the RPI1, RPI2 BBB and the WM8750. All ARM Processors, Also Debian on X86 and X64. See <https://github.com/N4IRS/AllStar> 73, Steve N4IRS >> Hi list, >> Can anyone point me in the direction of the signup page for the ARM >> specific app_rpt list, as I am going to be making an app_rpt node >> on a Banana Pro running Debian, and thought I should not clutter up >> the original list with potentially off topic discussion. >> Many thanks! >> Shane. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

The ARM app_rpt mailing list
by Shane Morris 27 Apr '15

27 Apr '15

Hi list, Can anyone point me in the direction of the signup page for the ARM specific app_rpt list, as I am going to be making an app_rpt node on a Banana Pro running Debian, and thought I should not clutter up the original list with potentially off topic discussion. Many thanks! Shane.

1 0

RTCM Lock up
by Jeff Carrier 26 Apr '15

26 Apr '15

Just a random thought. I know the RTCM is usually rock solid and I've had very isolated problems with it. Recently I had one lock up and I think it started with an IP conflict on the routers address. Is it conceivable or even possible to consider a watchdog feature in the RTCM? There may not be any memory space to even support this but I thought I'd run it up the flagpole. De K0JSC

1 0