June 2009 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Location of source code for usbradio.c and xpmr bits please ?
by hwstar＠rodgers.sdcoxmail.com 02 Jul '09

02 Jul '09

Over the past yaer or so, Digium has implemented a very rigorous code review/vetting process, which I feel is not worth investing any time in-- because frankly, I have enough problems to go after and resolve, and we refuse to play "patch catchup drudgery" expending valuable time keeping up with the latest Digium versions when the version we are using works fine for radio users. If someone wants to use the latest asterisk version with app_rpt and the usb channel driver, they'll need to do the app_rpt changes themselves, integrate the patches from our version of asterisk, test it, and correct any problems, or pay someone to do it. They are on their own. This is not to say that we might switch to a newer version of Asterisk at some point in the future, but it will only happen when something is needed in the newer version of Asterisk to either fix or improve app_rpt. Steve WA6ZFT Steve WA6ZFT > > From: Stephen - K1LNX <k1lnx(a)k1lnx.net> > Date: 2009/06/30 Tue AM 09:16:06 PDT > To: app_rpt-users(a)qrvc.com > Subject: Re: [App_rpt-users] Location of source code for usbradio.c and xpmr > bits please ? > > Sounds good guys, it's not so much about disk space for me as it is minimal > requirements, I guess it's my minimalistic nature :D > > Why is Digium so resistant to adding the changed code to their repository? > > 73 > Stephen > K1LNX > > > On Tue, Jun 30, 2009 at 10:00 AM, Steve Zingman <szingman(a)informx.com>wrote: > > > I agree with Jim. > > I don't auto load any modules (autoload=no) in modules.conf. > > I only load the modules I need and add more modules as I add features. > > > > 73, Steve N4IRS > > > > Jim Duuuude wrote: > > > Well, i dont know about that. > > > > > > In our experience with Limey Linux (very small footprint) there is still > > > room for a mostly complete distro. > > > On a host, there is plenty of disk space. > > > > > > I realize that these distros are mainly for radio/repeater use, BUT that > > > not all they are used for. I know > > > someone (DMK, the URI dude, actually) that just got a Limey Linux box > > > running as his phone system (I know, > > > I had to get mpg123 compiled for it for his music on hold). I had him > > > noload the app_rpt and chan_usbradio > > > modules, and it really does make a nice small CHEAP phone system. > > > > > > So I think that keeping this stuff as generally useful as possible is > > > the best thing. > > > > > > Just my opinion.. > > > > > > JIM WB6NIL > > > > > > > > > ------------------------------------------------------------------------ > > > Date: Tue, 30 Jun 2009 09:28:46 -0400 > > > From: k1lnx(a)k1lnx.net > > > To: App_rpt-users(a)qrvc.com > > > Subject: Re: [App_rpt-users] Location of source code for usbradio.c and > > > xpmr bits please ? > > > > > > Steve/group, > > > With all that being said (asterisk forked), what could we strip out > > > and still have core functionality strictly from the radio and allstar > > > network access aspect? My app_rpt install is solely for this project > > > alone, I entertained the idea of turning it into a full fledged PBX, but > > > your right it can cause problems and I think I am better off with a > > > stand alone install for that. > > > > > > I'm not sure how much interest or what level of work an undertaking like > > > that would take, but to have a slimmed down Asterisk version > > > specifically for this project would be a great idea. > > > > > > 73 > > > Stephen > > > K1LNX > > > > > > > > > On Mon, Jun 29, 2009 at 5:10 PM, <hwstar(a)rodgers.sdcoxmail.com > > > <mailto:hwstar@rodgers.sdcoxmail.com>> wrote: > > > > > > > > > > > > > > From: MW0CQU <MW0CQU(a)ntlworld.com <mailto:MW0CQU@ntlworld.com>> > > > > Date: 2009/06/29 Mon PM 12:03:39 PDT > > > > To: App_rpt-users(a)qrvc.com <mailto:App_rpt-users@qrvc.com> > > > > Subject: [App_rpt-users] Location of source code for usbradio.c > > > and xpmr > > > > bits please ? > > > > > > > > Hi all, > > > > > > > > I started adding app_rpt into an asterisk system here at the end > > > of last > > > > year, then other things > > > > kept me away from asterisk other than maintaining my home phone > > > system !. > > > > > > > > Now I have a little more time (before the next calamity!) I > > > thought I'd > > > > pick up where I left off > > > > > > > > But I dont want a turnkey distro at this stage I have app_rpt.c > > > and the > > > > digium sources I just want to add > > > > usbradio.c and the "xpmr" folder files onto my "development" > > asterisk > > > > box for a "play". > > > > > > > > I looked over the site, and couldnt find a link, > > > > > > > > I googled around a lot and found the code in HTML format (with > > line > > > > numbers) but couldn't find the raw source. > > > > > > > > Where do I get these sources these days please ? I cant see a > > > link to a > > > > CVS tree either > > > > > > > > 73 > > > > > > > > 'CQU > > > > > > > > > > > > > > > > > > > > > Your strategy is not advised. For two reasons. > > > > > > --one-- > > > > > > The latest Digium sources are not compatible with app_rpt and the > > > usb driver, Getting Digium to incorporate our changes to fix this > > > has been next to impossible. > > > > > > Our solution was to use a patched copy of asterisk 1.4.23-pre and > > > build our system off of that. Yes, we have technically forked > > > Asterisk, but we had no choice. > > > > > > --two- > > > > > > Running a radio system and a phone system off of the same box is > > > just asking for trouble. If the radio system goes down, so does your > > > phone system. I learned this one the hard way a few years ago when > > > my system was configured in this manner. I now run two separate > > > servers to avoid getting complaints form family members when my > > > experiments > > > on the radio system go amok. Also, the phone system works much > > > better with DTMF_RELAX configured to be disabled. > > > > > > The sources for the version of Asterisk with all necessary patches > > > and the latest app_rpt.c and usb channel driver are available via > > > SVN from the developers section of my site at > > > http://app-rpt.qrvc.com > > > > > > > > > Steve > > > WA6ZFT > > > > > > > > > > > > > > > > > > > > > > > > No virus found in this outgoing message. > > > Checked by AVG - www.avg.com <http://www.avg.com> > > > Version: 8.5.375 / Virus Database: 270.13.0/2209 - Release Date: > > > 06/29/09 14:43:00 > > > > > > _______________________________________________ > > > App_rpt-users mailing list > > > App_rpt-users(a)qrvc.com <mailto:App_rpt-users@qrvc.com> > > > http://qrvc.com/mailman/listinfo/app_rpt-users > > > > > > > > > _______________________________________________ > > > App_rpt-users mailing list > > > App_rpt-users(a)qrvc.com <mailto:App_rpt-users@qrvc.com> > > > http://qrvc.com/mailman/listinfo/app_rpt-users > > > > > > > > > > > > > > > -- > > > Stephen Brown - ARS K1LNX > > > Johnson City, TN EM86 > > > http://www.k1lnx.net > > > > > > > > > ------------------------------------------------------------------------ > > > > > > _______________________________________________ > > > App_rpt-users mailing list > > > App_rpt-users(a)qrvc.com > > > http://qrvc.com/mailman/listinfo/app_rpt-users > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)qrvc.com > > http://qrvc.com/mailman/listinfo/app_rpt-users > > > > > > -- > Stephen Brown - ARS K1LNX > Johnson City, TN EM86 > http://www.k1lnx.net > > _______________________________________________ App_rpt-users mailing list App_rpt-users(a)qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users

6 6

Re: [App_rpt-users] Location of source code for usbradio.c and xpmr bits please ?
by hwstar＠rodgers.sdcoxmail.com 30 Jun '09

30 Jun '09

> > From: MW0CQU <MW0CQU(a)ntlworld.com> > Date: 2009/06/29 Mon PM 12:03:39 PDT > To: App_rpt-users(a)qrvc.com > Subject: [App_rpt-users] Location of source code for usbradio.c and xpmr > bits please ? > > Hi all, > > I started adding app_rpt into an asterisk system here at the end of last > year, then other things > kept me away from asterisk other than maintaining my home phone system !. > > Now I have a little more time (before the next calamity!) I thought I'd > pick up where I left off > > But I dont want a turnkey distro at this stage I have app_rpt.c and the > digium sources I just want to add > usbradio.c and the "xpmr" folder files onto my "development" asterisk > box for a "play". > > I looked over the site, and couldnt find a link, > > I googled around a lot and found the code in HTML format (with line > numbers) but couldn't find the raw source. > > Where do I get these sources these days please ? I cant see a link to a > CVS tree either > > 73 > > 'CQU > > > Your strategy is not advised. For two reasons. --one-- The latest Digium sources are not compatible with app_rpt and the usb driver, Getting Digium to incorporate our changes to fix this has been next to impossible. Our solution was to use a patched copy of asterisk 1.4.23-pre and build our system off of that. Yes, we have technically forked Asterisk, but we had no choice. --two- Running a radio system and a phone system off of the same box is just asking for trouble. If the radio system goes down, so does your phone system. I learned this one the hard way a few years ago when my system was configured in this manner. I now run two separate servers to avoid getting complaints form family members when my experiments on the radio system go amok. Also, the phone system works much better with DTMF_RELAX configured to be disabled. The sources for the version of Asterisk with all necessary patches and the latest app_rpt.c and usb channel driver are available via SVN from the developers section of my site at http://app-rpt.qrvc.com Steve WA6ZFT No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.375 / Virus Database: 270.13.0/2209 - Release Date: 06/29/09 14:43:00 _______________________________________________ App_rpt-users mailing list App_rpt-users(a)qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users

4 4

sudo
by George Csahanin 30 Jun '09

30 Jun '09

In making ramdisk.img now get thru make binaries ok, but in make ramdisk it fails out of the gate on sudo. sudo doesn't like the -E option. If I'm running this as root, do I even need sudo? GeorgeC W2DB

1 0

Connection to speaker output
by Bill Scholey 29 Jun '09

29 Jun '09

I can't see the forest for the trees.... or similar!!! I'm new to app_rpt and in the process of installing (learning) the hardware and software..starting with something simple I thought.. This is for remote base not a repeater. I have the DMK URI and the XIPAR distro installed. When using IAXRPT I don't hear any receive audio.. transmit is fine both through the client and CLI.. For example *80 I can hear the cw id both on the client and over the air. I am using the speaker conx on an IC28H wired to Mic-in (Pin 9) on the URI. I believe the wiring is ok because I move the URI to a Windows system and using MMVARI I can see waterfall activity when listening on the APRS freq. I don't have test equipment unfortunately. Using my best 1000Hz whistle on a handheld I got rxvoice to "success"??. I've tweaked various settings in usbradio.conf (ie rxdemod=speaker) but still no joy. Now it's probably something obvious but what??? Like I say it's hidden in the forest somewhere.. So any clues for the clueless would be appreciated. Bill ve7qc

2 2

Location of source code for usbradio.c and xpmr bits please ?
by MW0CQU 29 Jun '09

29 Jun '09

Hi all, I started adding app_rpt into an asterisk system here at the end of last year, then other things kept me away from asterisk other than maintaining my home phone system !. Now I have a little more time (before the next calamity!) I thought I'd pick up where I left off But I dont want a turnkey distro at this stage I have app_rpt.c and the digium sources I just want to add usbradio.c and the "xpmr" folder files onto my "development" asterisk box for a "play". I looked over the site, and couldnt find a link, I googled around a lot and found the code in HTML format (with line numbers) but couldn't find the raw source. Where do I get these sources these days please ? I cant see a link to a CVS tree either 73 'CQU No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.375 / Virus Database: 270.13.0/2209 - Release Date: 06/29/09 14:43:00

1 0

Re: [App_rpt-users] limey linux build error
by hwstar＠rodgers.sdcoxmail.com 29 Jun '09

29 Jun '09

> > From: "George Csahanin" <george(a)dyb.com> > Date: 2009/06/29 Mon AM 11:23:53 PDT > To: <app_rpt-users(a)qrvc.com> > Subject: [App_rpt-users] limey linux build error > > Trying to make a D201 image, and the end of doing make ramdisk.img here's > the result. > > Also, is there a source for the D945 motherboard? I have the pre-built > image, but want to include my modified app_rpt.c, and also add in support > for the ethernet adapter on that board (r8168) > > I looked directly at debian.org's ftp server, and that file name and > directory don't exist there. What does exist at -- > http://ftp.debian.org/debian/pool/main/g/grep/grep_2.5.1.ds2.orig.tar.gz > > If this is correct, where can I modify to get this file instead? > > > > > > > > Error: > > > > wget --passive-ftp -P /usr/src/limey/buildroot/dl > http://ftp.debian.org/debian/pool/main/g/grep//grep_2.5.1.ds1.orig.tar.gz > > --2009-06-29 12:48:21-- > http://ftp.debian.org/debian/pool/main/g/grep//grep_2.5.1.ds1.orig.tar.gz > > Resolving ftp.debian.org... 130.89.149.226 > > Connecting to ftp.debian.org|130.89.149.226|:80... connected. > > HTTP request sent, awaiting response... 404 Not Found > > 2009-06-29 12:48:22 ERROR 404: Not Found. > > > > > > > > > > > > > > > > George Csahanin > > W2DB > > George J Csahanin > Director of Engineering and Operations > LIN TV Corp. > Austin, TX > 512-703-5396 office > 512-481-1233 secure fax > 401-338-0568 celphone > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)qrvc.com > http://qrvc.com/mailman/listinfo/app_rpt-users > Grep 2.5.1 is available for download from here: http://limeylinux.org/downloads/source-tarballs Find the grep.mk file and modify it to use the new url. Steve WA6ZFT

1 0

limey linux build error
by George Csahanin 29 Jun '09

29 Jun '09

Trying to make a D201 image, and the end of doing make ramdisk.img here's the result. Also, is there a source for the D945 motherboard? I have the pre-built image, but want to include my modified app_rpt.c, and also add in support for the ethernet adapter on that board (r8168) I looked directly at debian.org's ftp server, and that file name and directory don't exist there. What does exist at -- http://ftp.debian.org/debian/pool/main/g/grep/grep_2.5.1.ds2.orig.tar.gz If this is correct, where can I modify to get this file instead? Error: wget --passive-ftp -P /usr/src/limey/buildroot/dl http://ftp.debian.org/debian/pool/main/g/grep//grep_2.5.1.ds1.orig.tar.gz --2009-06-29 12:48:21-- http://ftp.debian.org/debian/pool/main/g/grep//grep_2.5.1.ds1.orig.tar.gz Resolving ftp.debian.org... 130.89.149.226 Connecting to ftp.debian.org|130.89.149.226|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2009-06-29 12:48:22 ERROR 404: Not Found. George Csahanin W2DB George J Csahanin Director of Engineering and Operations LIN TV Corp. Austin, TX 512-703-5396 office 512-481-1233 secure fax 401-338-0568 celphone

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 4, Issue 20
by John D. Hays 28 Jun '09

28 Jun '09

app_rpt-users-request(a)qrvc.com wrote: > Date: Sat, 27 Jun 2009 17:04:03 -0500 > From: Bruce Forestal <wb6are(a)gmail.com> > Subject: Re: [App_rpt-users] How to recomplie just the app_rpt.c ? > > > Steve, > > Thanks for the link, it was very helpful. I solved the problem. I > had the server powered off for a month and the CMOS battery must need > replacing as the clock was set to 2002. I had edited the app_rpt.c > file prior to running to setting the clock so the file was too stale > to be included in the compile. I resaved the file and ran make, make > install my change works great. > > Thanks, > Bruce > > Sent from my IPhone. > > Bruce, Familiarity with the "touch" command would have been helpful for you here. -- John D. Hays Amateur Radio Station K7VE <http://k7ve.org> PO Box 1223 Edmonds, WA 98020-1223 VOIP/SIP: john(a)hays.org <sip:john@hays.org> Email: john(a)hays.org <mailto:john@hays.org>

1 0

How to recomplie just the app_rpt.c ?
by Bruce Forestal 27 Jun '09

27 Jun '09

Good Day, I've made a minor change to the app_rpt.c file, How do I recompile app_rpt.c? I tried ./configure, make apps and then make install but no joy, I must have missed something. Thanks, Bruce

2 2

Echo Link channel connection failure
by Steve Gebhard 25 Jun '09

25 Jun '09

Hi group, finally got everything running last weekend except for EchoLink. When I try to do an inbound connection, it fails. An outbound connection produces the following failure: File.c : 1205 Unexpected control subclass '113 Then Asterisk stops and exits with a "exit 139" code AllStar and IRLP are perfect, what did I do wrong?

1 0