So, I followed the instructions at
https://wiki.allstarlink.org/wiki/Allmon2_Install
Got it all done, and tried to open up, in my local browser,
192.168.x.x/allmon2 (correct address inserted) and I get the error code of
"Resource Not Found"
allmon.ini.php
root@repeater:/var/www/html/allmon2# less allmon.ini.php
<?php
[Off-site Link]
url=http://google.com
[29655]
host=my.127.0.0.1:5038
user=admin
passwd=llcgi
nomenu=yes
hideNodeURL=yes
;[501]
;system=System1
;host=192.168.0.3:5038
;user=admin
;passwd=password2
;nomenu=yes
;hideNodeURL=yes
;[502]
;system=System1
;host=my.address.com:5038
;user=admin
;passwd=password2
;nomenu=yes
;hideNodeURL=yes
;[2000]
;system=System2
;host=my.address.com:5037
;user=admin
;passwd=password2
;[2000 RTCM]
;system=System2
;rtcmnode=2000
;[Grouped Nodes]
;nodes=500,501,2000
;[2 RTCMs]
;system=System2
;rtcmnode=2000,2001
?>
(END)
After reading the README file, I see that Apache needs to be installed and
running.
Is there enough room on my RPI3b's SD card for apache?
root@repeater:# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/root 30G 2.4G 26G 9% /
devtmpfs 459M 0 459M 0% /dev
tmpfs 463M 0 463M 0% /dev/shm
tmpfs 463M 47M 417M 11% /run
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 463M 0 463M 0% /sys/fs/cgroup
/dev/mmcblk0p1 99M 20M 79M 20% /boot
log2ram 40M 40M 0 100% /var/log
yeah... looks like.
So, I'm guessing that's my next step?
Thoughts?
--
73 = Best Regards,
-Geoff/W5OMR (29655)
