December 2011 - App_rpt-users - lists.keekles.org

Registration issues
by Randy Ballard 07 Dec '13

07 Dec '13

My nodes 27365 and 27751 both on same server is showing on the status page but not showing in the rpt_extnodes on other nodes im using standard port 4569. we have been seeing this with several nodes in our group over past month or so of coarse if we define in the rpt file we can connect but would be nice if it was registering. sometimes it may show up in a few hours or a day generally a reboot and its gone again Thanks for any help in advance 73 Randy KB3HJC

5 9

Fwd: Re: Allstar QSO Recording
by Keith Williamson 30 Jan '13

30 Jan '13

---------- Forwarded message ---------- From: "Keith Williamson" <hkwilliamson(a)gmail.com> Date: Feb 7, 2011 10:22 AM Subject: Re: Allstar QSO Recording To: "Bobby Lacey" <kf4gta(a)amsat.org> Cc: "app_rpt users list" <app_rpt-users(a)qrvc.com> Hi Bobby, The latest version which added remote command script capability is NodeShark v0.95 and can be downloaded from here: http://www.arizuni.com/NodeShark/ 73's, Keith KF7DRV Allstar: 2541 On 2/7/11, Bobby Lacey <kf4gta(a)amsat.org> wrote: > Hi Keith, > > I noticed on the app_rpt list that you were working on an interface for > playing recorded QSOs. I am really interested in this and was curious if you > have ever released it? Would love to try it out. > > Tnx & 73 > Bobby KF4GTA > -- Sent from my mobile device

3 2

Re: [App_rpt-users] Beagle Board-xM + LOX OS and power consumption
by Tim Sawyer 04 Jun '12

04 Jun '12

Can't help you there. Don't know but I bet the RTCM is pretty low current draw. -- Tim :wq On Dec 24, 2011, at 8:27 PM, Ron Morell wrote: > Tim, > OK, good to know. Now that the new firmware has the "fail over" to become a simple controller, is the CTCSS still generated in that mode with the new firmware? This device is so new, it is hard to understand just what to expect from it. WB6NIL rewrote the firmware for it very quickly, so it is definitely a moving target, but seems to be improving with each iteration. > > What do you know about the power consumption of the RTCM and the Beagle Board + LOX computer. Thinking through the opportunity, I need a power budget for them. > 73 and Merry Christmas! > Ron KA7U > > > On 12/24/2011 09:12 PM, Tim Sawyer wrote: >> >> The no CTCSS generation statement is referring to when the RTCM is connection failure mode. Otherwise it will generate CTCSS. >> -- >> Tim >> :wq >> >> On Dec 24, 2011, at 11:11 AM, Ron Morell wrote: >> >>> Tim, >>> Thank your for your reply and input. I am confused about the PL tone claim though. Check out this excerpt from a WB6NIL post: >>> >>>> Jim Duuuude telesistant at hotmail.com >>>> Fri Dec 23 23:33:34 EST 2011 >>>> Previous message: [App_rpt-users] Allstar RTCM (Radio Thin Client Module) is nowavailable >>>> Next message: [App_rpt-users] App_rpt-users Digest, Vol 34, Issue 59 >>>> Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] >>>> I've been really busy (and productive) today. >>>> >>>> The new version (0.60) of the RTCM/Voter board firmware now supports the following: >>>> >>>> Notification via CW of host connection failure (with the option of repeating it >>>> periodically if still failed, along with option of repeating it after receiver un-key). >>>> >>>> Notification via CW of host connection restoral after failure. >>>> >>>> "Offline" repeat mode, where it becomes a "dumb" repeater if host connection is lost. >>>> Includes settable hang time. The "Notification via CW of host connection failure" feature >>>> also can serve as a CW identifier in this mode (and was designed to do so). >>>> >>>> The CW speed, CW strings (content of messages), and some other stuff is user-settable >>>> from a menu. >>>> >>>> Speaking of menus, the "big humongous" main menu is now split in to 3 nice, smaller ones. >>>> The 2 sub-menus are IP (networking) parameters, and "Offline Mode" parameters. >>>> >>>> The only thing it does *NOT* do is generate CTCSS tone when transmitting. I doubt it ever >>>> will, since we are pretty much out of code space in the processor. This would require the >>>> use of floating point trig functions to calculate generation constants (or from a table), neither >>>> of which we have room for. >>>> >>>> The 0.60 version will be available on SVN at 2115 PST tonight. >>>> >>>> JIM WB6NIL >>> As you have just read, Jim says there is no room on the RTCM processor to handle CTCSS. So are you sure that the RTCM does handle PL tones? I would have thought the tone generation would have been the same type of process. >>> Ron - KA7U >>> >>> On 12/24/2011 11:18 AM, Tim Sawyer wrote: >>>> >>>> The RTCM's do facilitate simulcasting. They sync the transmit audio and generate PL. You only need to add frequency stabilization to each of your transmitters to have a simulcast system. >>>> -- >>>> Tim >>>> :wq >>>> >>>> On Dec 24, 2011, at 9:43 AM, Ron Morell wrote: >>>> >>>>> Trying to catch up on the threads of information and now trying to >>>>> understand the Beagle Board and LOX. So reading along, I find this >>>>> board is using an ARM DM3730CBP 1GHz processor in the current versions. >>>>> I find that Pickle Linux is supplying an Asterisk+app_rpt ISO image >>>>> meant to be written to a 4Gbyte mini SD Card, and that GMK Engineering >>>>> is selling a LOX board with adapter cables to connect it to the Beagle >>>>> Board-xM and that this device will connect up to 2 radios. >>>>> >>>>> Reading on, there is the RTCM device that is capable of replacing an >>>>> Asterisk+app_rpt computer at a radio site, but these devices need to >>>>> connect to a "Hub" Asterisk+app_rpt to be addressable through the >>>>> AllStar Link Network. Recently WB6NIL has added firmware updates to >>>>> manage these RTCM devices as a simple repeater controller in the event >>>>> they lose connection with the "Hub" Asterisk+app_rpt switch controller. >>>>> >>>>> So my questions so far are: >>>>> how much power in watts does the Beagle Board-xM with LOX use on average? >>>>> how much power in watts does the RTCM use on average? >>>>> Has anyone compiled a Debian OS with Asterisk+app_rpt for use on the >>>>> Beagle Board-xM, or is Pickle Linux the only currently available OS >>>>> solution? >>>>> Is the current Beagle Board-xM the recommended computer to use, or is >>>>> another version better supported? >>>>> Do the Beagle Board users need to have a JTAG device to debug and >>>>> interface with the system and upgrade uBoot? If so, which JTAG device >>>>> is recommended? >>>>> >>>>> OK, enough with the questions. Given that the RTCM seems to be an >>>>> attractive solution and the Beagle Boards are supporting up to 2 radios >>>>> per device with a very elegant solution, I would like to learn as much >>>>> as I can about these devices and their intended as well as extended >>>>> uses. I'm not at all competent with the discussion on simulcasting >>>>> repeaters and nodes, but from what I've read that is not really the >>>>> scope of these devices, or is there something about simulcast that I've >>>>> missed in the threads here? >>>>> >>>>> 73 and Merry Christmas, >>>>> Ron - KA7U >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)ohnosec.org >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>

4 3

Adding APRStt tp my node
by Michael Kaufman 15 Feb '12

15 Feb '12

I have read on some websites that an APRStt function was being added to Allstar. I have not seen any documentation or information on the progress of this feature. I would like to add this to my node and would appreciate any help or information on implementing this feature if it is available. Mike WB9SLI Node 27558

4 8

DTMF voice falsing
by Chris(KB2FAF) 23 Jan '12

23 Jan '12

Hi, I have been noticing an interesting problem. Audio drops on my repeater and link sporadically for maybe 500ms now and then as a conversation is taking place. If I watch debugging data from CLI it usually coincides with DTMF being sensed in certain voices. Is there a way to increase the time it takes for the system to recognize DTMF? Or is there something else going on. Thanks for any pointers... Chris KB2FAF

7 13

Allstar issues this AM?
by Lu Vencl 07 Jan '12

07 Jan '12

I don't know why, but none of my boxes are able to connect properly to any nodes and they are at all different places. Anyone know of any issues out there? All I get is connection failed messages, but I can ping the IP's from box to box and DNS is working. Lu KA4EPS

4 8

SheevaPlug
by Monty Dana 03 Jan '12

03 Jan '12

Anyone ever try to run app_rpt on the SheevaPlug <http://plugcomputer.org/>? -- Monty

4 3

limey compile "miniperl" error
by George Csahanin 02 Jan '12

02 Jan '12

In compiling Limey you encounter an error about miniperl. There's a patch/fix: I just edited microperl.mk and added the line with the + at the beginning(without the +) It is compiling right now, got all the way through buildroot. Its now doing the kernel compile. GeorgeC W2DB --- a/package/microperl/microperl.mk +++ b/package/microperl/microperl.mk @@ -40,6 +40,7 @@ $(MICROPERL_DIR)/.host_configured_and_fixed: $(MICROPERL_DIR)/.host_configured $(SED) 's/^.*<command-line>.*//g' $(MICROPERL_DIR)/Makefile $(SED) 's/^.*<command-line>.*//g' $(MICROPERL_DIR)/x2p/Makefile $(SED) 's/^.*<command-line>.*//g' $(MICROPERL_DIR)/makefile + $(SED) 's/^libs =/libs = -lm/g' $(MICROPERL_DIR)/makefile $(SED) 's/^.*<command-line>.*//g' $(MICROPERL_DIR)/x2p/makefile touch $@ George J Csahanin W2DB Cedar Park, TX

3 2

CallSign ID instead of Node #
by Fran 31 Dec '11

31 Dec '11

Hello, Im trying to find the setting for saying the connected users callsign instead of his Node #

2 1

RTCM now supports CTCSS encode in "offline (failover) mode"
by Jim Duuuude 30 Dec '11

30 Dec '11

The RTCM firmware now supports encoding of locally-generated CTCSS in "offline" (failover) mode. This was not previously included because of limitation in code space in the microcontroller, but I managed to "squeeze" it in. I hope I dont have to add much more. There just isnt room. JIM WB6NIL

2 3