August 2016 - App_rpt-users - lists.keekles.org

Disable the TXENA
by Skyler F 30 Sep '16

30 Sep '16

Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled. 73 Skyler

6 11

toy throwing time?
by Steve Wright 14 Sep '16

14 Sep '16

On 12/07/16 07:05, Steve Zingman <szingman(a)msgstor.com> wrote: > There have been discussion as to how to move forward. The people > involved are the people that will do the work. We can not be "left > behind" and the tools needed are available. app_rpt is Open Source, > Asterisk is Open Source. The concepts and methods used by app_rpt are > readily apparent. They can be re-created. > [....] > On 7/11/2016 2:33 PM, Loren Tedford wrote: >> Now where do we begin? I know absolutely nothing about coding however >> I do know if we don't do some thing fast we will be left behind and >> the tools others may have had available to port their stuff through >> may not be available for us.. >> Where do we join this group? Set it up.

17 37

Problems surrounding Dial with service asterisk stop and start along with restart
by Loren Tedford 31 Aug '16

31 Aug '16

Greetings I have found an issue today on a pure dial install out in a Data Center environment where service asterisk stop and service asterisk start did not work.. Anyone else having these issues with Dial? Here is some other commands i tried instead.. root@hub:/etc/init.d# ./asterisk status ● asterisk.service - LSB: Asterisk PBX Loaded: loaded (/etc/init.d/asterisk) Active: failed (Result: exit-code) since Wed 2016-08-31 05:56:34 EDT; 22min ago Process: 19146 ExecStop=/etc/init.d/asterisk stop (code=exited, status=0/SUCCESS) Process: 19289 ExecStart=/etc/init.d/asterisk start (code=exited, status=1/FAILURE) Aug 31 05:56:34 hub.kc9zhv.com asterisk[19289]: Asterisk is already running. /etc/init.d/...w. Aug 31 05:56:34 hub.kc9zhv.com systemd[1]: asterisk.service: control process exited, code...s=1 Aug 31 05:56:34 hub.kc9zhv.com systemd[1]: Failed to start LSB: Asterisk PBX. Aug 31 05:56:34 hub.kc9zhv.com systemd[1]: Unit asterisk.service entered failed state. Hint: Some lines were ellipsized, use -l to show in full. root@hub:/etc/init.d# ./asterisk forcestart Usage: /etc/init.d/asterisk {start|stop|restart|reload|force-reload} root@hub:/etc/init.d# ./asterisk force-reload [....] Reloading asterisk configuration (via systemctl): asterisk.serviceJob for asterisk.service failed. See 'systemctl status asterisk.service' and 'journalctl -xn' for details. failed! root@hub:/etc/init.d# ./asterisk reload [....] Reloading asterisk configuration (via systemctl): asterisk.serviceJob for asterisk.service failed. See 'systemctl status asterisk.service' and 'journalctl -xn' for details. failed! root@hub:/etc/init.d# As you see above i still received failures to stop and start asterisk using even this method Any thoughts? Anyone had any luck porting any of this to centos 7? Considering making it part of a nethserver project i have been working on.. Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford(a)gmail.com Email: KC9ZHV(a)KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/> http://voipham.com

2 1

Server IP target address
by H Hugh Flint 31 Aug '16

31 Aug '16

I am currently working on an medium scale network. Trying to get Allstar Link ported through it. I need the VOIP server IP target address to perform the testing. Thanks for your help, H Hugh Flint, KF7LN

2 1

Fw: cop command 2 and 3 disable enable
by petem001＠gmail.com 30 Aug '16

30 Aug '16

Sent this on Sunday. No answer yet.. Is it that complex? From: Pierre Martel Sent: Sunday, August 28, 2016 7:13 AM To: APP RPT Subject: cop command 2 and 3 disable enable Hi I am working on a project to interface an allstar node on a multimode digital repeater based on the MMDVM This would woould create a multimode fm,dtsar,fusion and dmr repeater system. I know some people dont like that. but on a remote site where energy and antenna deployement difficult and for place where installing multiple repeater is price prohibitive, this is a nice solution. No mode is left aside. but only one can be used at once. So in order to make this work I need to know how the cop 2 and 3 command works. I want to use the event manager to send those 2 command when one input from my URI is switching state. this will be connected to the MMDVM and it will prevent the tx or false rx when the DVMDM is taking control of the repeater. WHat happen to any audio received by the network when in disable mode? IS it still present at the URI? Does the link that are present stay connected or they disconnect? I need this so that I can figure out if it is more effective to use a pair of small relay to cut the audio lines and ptt lines when the MMDVM is active or doing it by software. thanks Pierre VE2PF

1 0

cop command 2 and 3 disable enable
by Pierre Martel 28 Aug '16

28 Aug '16

Hi I am working on a project to interface an allstar node on a multimode digital repeater based on the MMDVM This would woould create a multimode fm,dtsar,fusion and dmr repeater system. I know some people dont like that. but on a remote site where energy and antenna deployement difficult and for place where installing multiple repeater is price prohibitive, this is a nice solution. No mode is left aside. but only one can be used at once. So in order to make this work I need to know how the cop 2 and 3 command works. I want to use the event manager to send those 2 command when one input from my URI is switching state. this will be connected to the MMDVM and it will prevent the tx or false rx when the DVMDM is taking control of the repeater. WHat happen to any audio received by the network when in disable mode? IS it still present at the URI? Does the link that are present stay connected or they disconnect? I need this so that I can figure out if it is more effective to use a pair of small relay to cut the audio lines and ptt lines when the MMDVM is active or doing it by software. thanks Pierre VE2PF

1 0

Connecting several sites together on a hub using link radios
by Stephen - K1LNX 26 Aug '16

26 Aug '16

Hi guys... I am in the midst of deploying a 5 site system. All of the sites with the exception of my own will be using link radios sitting on the repeater pair, some sites do not have internet access so this is the only option. Each node will be permalinked to our hub. What we discovered when we brought site number 3 online was the dreaded "ping-pong" effect, and I did some digging and found out about the rxondelay parameter, that seems to be the place to start with this. The other option we are considering is dropping the hang time off each repeater and using app_rpt to do hang time and courtesy tones instead (duplex = 1 instead of 0) but not sure that would work real well or be optimal. Anyone have any experience with a setup like this that can offer some advice? This is my first foray into this unfortunately, I've always just interfaced the radio or repeater directly to app_rpt in the past or through a controller so it's been a bit of a challenge. 73 Stephen K1LNX

8 16

Re: [App_rpt-users] Voter delay and Asterisk question
by Hayden Honeywood 24 Aug '16

24 Aug '16

Further on my previous post to the board.. Has anyone used a BG7TBL GPS as a timing device for a voter board? http://www.ebay.com/itm/121530825744 I see it delivers NMEA output, but the 1PPS spec is Square Wave 3.3Vpp. This concerns me as I read on this post - http://ohnosec.org/pipermail/app_rpt-users/2016-March/013786.html That the RTCM/Voter boards require 5V coming in on the 1PPS line. Has anyone had it working? This would be a good alternative to the Garmin GPS units as it also gives me the 10MHz I need to lock my transmitter on frequency. Another benefit is that only the GPS antenna is exposed to the weather elements rather than the whole GPS unit of a Garmin. The cable run for our GPS unit will be about 10 metres or so. Has anyone had any issues extending the cable length of a Garmin 18x LVC unit? Hayden

2 1

Voter delay and Asterisk question
by Hayden Honeywood 24 Aug '16

24 Aug '16

Hi All, I've been playing around with my voter boards recently that I've constructed. I've been able to get the GPS and voting working, and interfacing with Allmon to show voted stations. I initially had DIAL running on an i7 with about 8GB of RAM. Way too much and overkill, but it was all I had at the time. I did some limited testing and it appears that I was able to put the buffer values as low as they would go according to this page, as I was only testing on my local network (3ms ping) - http://ohnosec.org/drupal/node/195 I set TX buffer to 480 and the RX to 120. With the i7 I could not detect any echo and switching was rather fast. However I changed to a RPi3 using the same settings. I can now hear some echo, especially if I let go of the button quickly. Whilst it is preventable (leave a short silent gap), I would of thought that over my local network with minimum values I would experience close to zero echo. Perhaps the processing power of the Pi3 is now the holdup?? Also, when voice idents are made, the tail timer runs at the end of the ident. This is not normal operation compared to most controllers, when an ID is sent, it does so and the PTT drops at the end of the ID. Can you also have more than one ID, for instance an initial ID when the repeater hasn't been used in x amount of time, and a regular ID that is used and inserted between conversations? I also run all of my CTCSS encoders in a way that they follow receiver activity (the Arcom RC-210 does this too). That way we can use it for linking and avoid sending idents and courtesy tones/tails over links. Can this be implemented in rpt.conf somewhere? Regards Hayden

1 0

URI sending courtesy tone every 3 seconds
by Doug Fessler 24 Aug '16

24 Aug '16

Hi, I have a Pi3 that I am interfacing with a URI. In my experimenting, something happened and the URI now sends the courtesy tone every 3 seconds. When the cable/radio is hooked up, it constantly transmits (radio gets hot!). So, I disconnected the radio and rebooted the node (several times)... same thing. It keeps sending the courtesy tone. Anyone seen this or have a pointer for me? Thanks, Doug KI7DQG

2 2