December 2010 - App_rpt-users - lists.keekles.org

SheevaPlug
by Monty Dana 03 Jan '12

03 Jan '12

Anyone ever try to run app_rpt on the SheevaPlug <http://plugcomputer.org/>? -- Monty

4 3

iax / Asterisk & I should never be called
by Ken 12 Jan '11

12 Jan '11

Been scratching my head here for a week with iaxRpt. I have two nodes: I can connect to one of them (so iaxRpt is obviously working) but not the other App-rpt is trying to tell me something about the problem but I do not know what: atom2*CLI> -- Accepting AUTHENTICATED call from 69.243.53.147: > requested format = ulaw, > requested prefs = (), > actual format = ulaw, > host prefs = (ulaw|gsm), > priority = mine -- Executing [27021@radio-gui:1] Rpt("IAX2/gui-126", "(27021|X)") in new stack [Dec 31 11:39:13] WARNING[1555]: app_rpt.c:20884 rpt_exec: Cannot find specified system node (27021 == Spawn extension (radio-gui, 27021, 1) exited non-zero on 'IAX2/gui-126' -- Hungup 'IAX2/gui-126' I have looked at iax.conf and extensions.conf and do not see any differences between the two nodes, other than the node numbers. I am connecting from behind the same router. The node that works is on port 4568 (on the internet side) and the one that does not work is on port 4569. The one that works can connect both on the local IP address and on the WAN address with the 4568 port number appended. I have tried making the iaxRpt "listener port 4567, "just for grins" - no effect. >>>>> Why can't app-rtp find it *own* node number when called by iaxRpt? Here is what it looks like when it works (the other node): -- Accepting AUTHENTICATED call from 69.243.53.147: > requested format = gsm, > requested prefs = (), > actual format = gsm, > host prefs = (gsm), > priority = mine -- Executing [27061@radio-gui:1] Rpt("IAX2/gui-6459", "27061|X") in new stack [Dec 31 12:02:43] NOTICE[22711]: channel.c:2075 __ast_read: No/unknown event '0' on timer for 'IAX2/gui-6459'? [Dec 31 12:02:43] NOTICE[22711]: chan_iax2.c:4677 iax2_read: I should never be called! == Spawn extension (radio-gui, 27061, 1) exited KEEPALIVE on 'IAX2/gui-6459' -- <Zap/pseudo-363503172 ((all the callsign readouts here)) -- Hungup 'Zap/pseudo-363503172' -- Hungup 'Zap/pseudo-135650357' The "I should never be called" message looks like something gone wrong in app-rpt .. except that it works. Ken

2 3

Reverse Autopatch on Simplex node
by Carl Davies 31 Dec '10

31 Dec '10

Hi all, I'm trying to get reverse autopatch working on my simplex node, The setup so far, I have an IP phone on the same network as the box, I have added an extension in asterisk and all is good, If I dial *6 100 (the phone is extension 100) from a radio then the phone rings, if I answer the phone then I'm connected to the node with vox operation from the phone, that part all works fine and I'm very happy with it. If I do a reverse patch things are different, I dial on the phone the node number (27473) which is answered straight away without any beeps or announcements, the node goes onto TX with my phone audio being transmitted, there is no vox operation, to stop the TX I have to dial #, I then can't get the node TX again, I have tried *98 and even changed the command against cop,6 to another number but nothing. If I dial any digit the node goes onto TX and you hear the dtmf digit transmitted then the nodes goes back to RX, if you dial *5 only the 5 is transmitted on air, the * is never transmitted (expect that is normal) I would like the setup to work the same on reverse patch as forward patch works, Many thanks for any help, Best Regards and Happy New year. Carl Davies (M1ELR) Node 27473 Liverpool, UK

1 0

Minimum System and Network Requirements
by Nathan Roberts (T75) 31 Dec '10

31 Dec '10

I'm looking to set up ACID on another machine. The machine will run 1 node (using DMK URI), which will be connected to only by iaxrpt. Its likely that the node will be simplex, although if a change to duplex would affect the answers it would be useful to know. System requirements: I read a while ago that the minimum system requirements were Pentium III 866Mhz, and 512MbRAM. I've seen references to the use of Beagle board, which until recently (if I understand correctly) wouldn't have been a comparable spec. Is the above spec a minimum, or have people found say a 600Mhz processor adequate for this level of installation? Network requirements: My use is generally temporary installs at remote locations. Broadband is often available, but for the locations where it isn't has anyone any experience of using 3G connections , or even GPRS (with an appropriate codec selected). I have experience of getting reliable 3G connections for 64k mp3 shoutcast broadcast feed streams, but not for ROIP use. I appreciate that reliability and latency will be degraded with a mobile connections. Any experience much appreciated. Regards Nathan

2 1

Re: [App_rpt-users] SVN
by hwstar＠rodgers.sdcoxmail.com 30 Dec '10

30 Dec '10

Anonymous SVN update via port 3690 is no longer being offered. The viewvc tarball download feature should be used to grab the latest sources per the update instructions on allstarlink.org and ohnosec.org/drupal. Steve WA6ZFT On Thu, Dec 30, 2010 at 8:34 AM, Scott Weis wrote: > That's not what I was asking for. Before the domain name change I was > able > to use SVN directly to update my local copy of the sources. It makes > it very > easy to automatically update a node to the latest development release. > > Scott > > -----Original Message----- > From: Ken [mailto:ke2n@cs.com] Sent: Wednesday, December 29, 2010 5:40 > PM > To: 'Scott Weis' > Cc: app_rpt-users(a)ohnosec.org > Subject: RE: [App_rpt-users] SVN > > Web access to the tar ball is here > > > http://app-rpt-svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/tru > nk/?root=svn&view=tar > > extract the files under Linux, not windows. > > If you unzip it under Windows, the permissions will all get trashed > when you > WinSCP it over to the Linux machine > > Ken > >> -----Original Message----- >> From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users- >> bounces(a)ohnosec.org] On Behalf Of Scott Weis >> Sent: Wednesday, December 29, 2010 5:19 PM >> To: app_rpt-users(a)ohnosec.org >> Subject: [App_rpt-users] SVN >> >> I know there have been a lot of changes, but I can't seem to find the >> SVN repository. I have been using: svn co >> svn://qrvc.com/projects/allstar/astsrc-1.4.23-pre/trunk to update my >> sources. >> >> Thanks & 73, >> Scott KB2EAR >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

SVN
by Scott Weis 30 Dec '10

30 Dec '10

I know there have been a lot of changes, but I can't seem to find the SVN repository. I have been using: svn co svn://qrvc.com/projects/allstar/astsrc-1.4.23-pre/trunk to update my sources. Thanks & 73, Scott KB2EAR

2 2

Re: [App_rpt-users] Reinstall
by Bob Bunter 29 Dec '10

29 Dec '10

Download says supplemental Files Missing. So it leads me to believe that its NOT downloading ALL of the required Files. Never ran into this before. Its always been smooth in the past....

1 0

Reinstall
by Bob Bunter 29 Dec '10

29 Dec '10

How do you reinstall the Asterisk Program from scratch? Mine loads to a point then ask to log In. Log In to what? I never get to the point of setting up my Password. Seems like it is missing files on a Reinstall or maybe the server is down.....

1 0

Version
by Bob Bunter 28 Dec '10

28 Dec '10

How does one know if there has been a New Software Version Release? I believe mine is 0.273.

1 0

dtmf decode during phone patch up not working
by George Csahanin 28 Dec '10

28 Dec '10

I have another one... Do *6, get dialtone. Will not decode *0 from radio. CLI of *0 does work, and when patch down and looking at console can see *0 decoded, just not while patch is active. Any thoughts, anyone? Thanks GeorgeC Node 2360 George J Csahanin W2DB Cedar Park, TX

3 5