October 2012 - App_rpt-users - lists.keekles.org

URI<>TKR-750 cable
by Jay Urish 06 Feb '15

06 Feb '15

Does anybody have notes on connecting tkr750 to a URI? TIA, W5GM

4 3

Registration issues
by Randy Ballard 07 Dec '13

07 Dec '13

My nodes 27365 and 27751 both on same server is showing on the status page but not showing in the rpt_extnodes on other nodes im using standard port 4569. we have been seeing this with several nodes in our group over past month or so of coarse if we define in the rpt file we can connect but would be nice if it was registering. sometimes it may show up in a few hours or a day generally a reboot and its gone again Thanks for any help in advance 73 Randy KB3HJC

5 9

ACID versus XIPAR
by Michael Hebert 18 Mar '13

18 Mar '13

What is the difference between ACID and XIPAR?

5 5

Fwd: Re: Allstar QSO Recording
by Keith Williamson 30 Jan '13

30 Jan '13

---------- Forwarded message ---------- From: "Keith Williamson" <hkwilliamson(a)gmail.com> Date: Feb 7, 2011 10:22 AM Subject: Re: Allstar QSO Recording To: "Bobby Lacey" <kf4gta(a)amsat.org> Cc: "app_rpt users list" <app_rpt-users(a)qrvc.com> Hi Bobby, The latest version which added remote command script capability is NodeShark v0.95 and can be downloaded from here: http://www.arizuni.com/NodeShark/ 73's, Keith KF7DRV Allstar: 2541 On 2/7/11, Bobby Lacey <kf4gta(a)amsat.org> wrote: > Hi Keith, > > I noticed on the app_rpt list that you were working on an interface for > playing recorded QSOs. I am really interested in this and was curious if you > have ever released it? Would love to try it out. > > Tnx & 73 > Bobby KF4GTA > -- Sent from my mobile device

3 2

Adjusting Audio Levels
by Sal P. De Franco 12 Nov '12

12 Nov '12

Hello, How do you adjust the audio levels on the node only. In the irlp world I use "Aumix". What do I use in the App_rpt world. Repeater using 2 gm300 and DMK Urix. Sal N6SPD Node 28365

8 10

Alinco/URI setup
by Peter Watkins 01 Nov '12

01 Nov '12

Hello, I'm beginning the process of setting up a node with an Alinco radio and a URI. I have tried to execute the following command "radio tune rxnoise" and received the following message: "DONE tries=12, setting=1000, meas=1058, sqnoise=290 ERROR: RX INPUT ADJUST FAILED. [Oct 30 06:47:51] NOTICE[2525]: chan_iax2.c:9712 socket_process: Registration of '1999' rejected: 'Registration Refused' from: '67.215.233.178'" I'm extremely new to thjs, and would appreciate any help. Thanks and 73 Peter VK3TKK

5 5

Re: [App_rpt-users] Using SVN copy of Asterisk on RaspberryPi (and "usb.h")
by Shane Morris 31 Oct '12

31 Oct '12

Hi Jim, Ramesh, and list, I'd had Jim had a look at the Zaptel install on my RPi. As far as I can tell its working (correct me if I'm wrong here Jim?), and for the sake of the list, I'm going to try to get Jim to write up how he did it. I am particularly intrigued with what he did, I understand the outside of it, but the details are a bit lost on me. I'm just compiling Asterisk now, I've gotten to the GSM codec stage, using the instructions from: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=56&t=4885&p=163382 Of course, why didn't I do this first? =( Lets see how we go! On Mon, Oct 29, 2012 at 1:29 PM, Shane Morris <edgecomberts(a)gmail.com> wrote: > Hopefully a little better than they did at 6am here. I'm out of town for a > while with my laptop, and on a baulky 3G connection. So I'm no help there. > > Jim, if you want to organise another session at your convenience, let me > know, I'll see what I can do. But please gents, keep up the good work! > > On 29/10/2012 1:26 PM, "Ramesh Dhami (VA3UV)" <Ramesh(a)va3uv.com> wrote: >> >> Hi Jim; >> >> Just a heads-up, we're getting ready to go off to the land of nod in a few >> minutes. >> >> How are things looking? >> >> Ramesh. >> >> On 28/10/2012 5:22 PM, Jim Duuuude wrote: >>> >>> okay, on Shane's machine I got it to compile and almost work. I saved >>> the 'stuff' I changed, and will >>> import it to Ramesh's system and attempt to continue later today. >>> >>> Ramesh, please leave your system up, and hopefully I wont panic the >>> kernel :-). >>> >>> Also, Ramesh, how late do you stay up (EDT, of course)? I want to know >>> how long >>> "reboot" access will be available today/this evening. >>> >>> Thanks >>> >>> Jim >>> >> >

1 1

Re: [App_rpt-users] Fwd: Dtmf pass through
by Ian Venable 29 Oct '12

29 Oct '12

So I still am having trouble with this. So far I have added propagate_dtmf=yes linktolink=yes inxlat=#56,#57,0123456789ABCD outxlat=#56,#57,0123456789ABCD to the rpt.conf file on the node that has the cat200b controller attached to it. Also on both of my other nodes that are connected via the allstar system i have added propagate_dtmf=yes to there rpt.conf files. I have done a restart on all the nodes, and still not getting the dtmf to pass through. When the dtmf passes through you should be able to hear it on the output of the repeaters, right? As long as it is not started with a (*) then the node would try to act on the dtmf. The cat200b controller is in remote base weather mode, and does not require COR, or PL to act, all it is looking at is the Tx audio from the usb fob, which goes into the Rx port on the controller. So all the controller needs to hear is the DTMF audio, but its not getting there. The controllers Tx audio is connected to the Rx audio on the usb fob, and I know thats working because I hear the controller identify itself with its version when I power cycle it. I am probably doing something wrong, so hopefully someone could point me in the right direction. Thanks! Ian Ki6ies On Sun, Oct 28, 2012 at 5:42 PM, Ken <ke2n(a)cs.com> wrote: > *4 sends “telemetry” (control codes) to the other node … not DTMF**** > > ** ** > > I think you want**** > > ** ** > > propagate_dtmf=yes**** > > ** ** > > in the node stanza**** > > ** ** > > Ken**** > > ** ** > > *From:* app_rpt-users-bounces(a)ohnosec.org [mailto: > app_rpt-users-bounces(a)ohnosec.org] *On Behalf Of *ki6ies.tasma(a)gmail.com > *Sent:* Sunday, October 28, 2012 5:31 PM > *To:* app_rpt-users(a)ohnosec.org > *Subject:* [App_rpt-users] Fwd: Dtmf pass through**** > > ** ** > > > > -------- Original Message -------- > Subject: Dtmf pass through > From: ki6ies.tasma(a)gmail.com > To: app_rpt-users-request(a)ohnosec.org > CC: **** > > Hello all! I need some help. I am trying to control a cat200 repeater > controller via dtmf. It is its own node. I have my other node (uhf > repeater)connected to it, from which i would like to send the commands > from. I have tried the *4 and the node number. And then i hear "By your > command". But dtmf is not making it to the controller. It is making it to > the other node, because I can issue it commands. It is just not passing > through the other node, which i would like for it to do. Any thoughts?**** > > ** ** > > Ian**** > > ** ** > > *Sent from my Verizon Wireless 4G LTE DROID***** >

3 3

motorola radius m120 and URI
by K1IF 29 Oct '12

29 Oct '12

Could someone send me a sample usbradio.conf file sample that works with this radio. Thank you John

1 0

Re: [App_rpt-users] Autopatch
by Pawlowski, Adam 29 Oct '12

29 Oct '12

>The best way to trouble shoot this is to look at the asterisk log on your server. >You can follow the call as it is processed by your server and see if it is getting handed to the upstream provider properly or not. > >There are literally dozens of places for thing to go wrong, and most of them will play the same error message to the caller. I didn't see an answer to this, but, by default there appears to be a context called "radio" indicated in the default node stanza in rpt.conf . That runs through a block in extensions.conf that does some loose checking if a number to dial is valid, and then presents it to pstn-out. Which, by default, btw, only plays an obnoxious congestion tone. However, numbers that are rejected will route to the "invalidnum" context which plays the "not in service" message. There are a number of predefined ones but, I would guess you are running afoul of toll free numbers, or some non-standard number which is dropping through to one of those patterns. The asterisk messages log, in /var/log/asterisk/messages , may contain details. You can also watch the console with a bit of verbosity and see what it's trying to do, and see the dialed pattern. I got this working fairly easily by just adding a SIP peer, but, there's no auth code or anything built in to prevent you from dialing out, or anyone for that matter. For the most part, autopatches are nonexistent over here so nobody knows it is there, I could see someone dialing it accidentally if they're not careful. Dialtone is played over the web transceiver if you patch from there but not the local radio, on my node anyways. The only thing that's being obnoxious is that it eats DTMF, and for whatever reason, speech seems to be recognized as DTMF sometimes which results in what sounds like choppy conversation, but, it's just that masking function.

1 0