November 2013 - App_rpt-users - lists.keekles.org

URI<>TKR-750 cable
by Jay Urish 06 Feb '15

06 Feb '15

Does anybody have notes on connecting tkr750 to a URI? TIA, W5GM

4 3

Echo-stink
by Johnny Keeker 05 Jan '15

05 Jan '15

I've found the 'permit=w1aw,w5yi,etc' line in the echolink.conf only allows for 29 allowed calls. Any more than 30 entries in the list prevents incoming requests on or not on the list access to the node. Short of checking for typo's, using a backslash\ to continue to the next line, or adding another 'permit= line' hasn't proved any results. ???

6 6

Dual PL Tone? Possible?
by Bob Roszkowski 07 Jan '14

07 Jan '14

Could it be possible to have 2 pl tones on a repeater? Here is what I was thinking, if somone wanted to talk on the link, they could use PL tone A. Then, If someone wanted to use the repeater locally and not transmit over the link, they can use PL tone B. I understand you can put the system in monitor mode, but this would be a nice option with out having to reconfigure the repeater. I could see this useful if Skywarn was activated and they don't want to tie up the link but still be able to talk to them if needed. Just my random thought of the day. boB - W5EVH

10 17

Registration issues
by Randy Ballard 07 Dec '13

07 Dec '13

My nodes 27365 and 27751 both on same server is showing on the status page but not showing in the rpt_extnodes on other nodes im using standard port 4569. we have been seeing this with several nodes in our group over past month or so of coarse if we define in the rpt file we can connect but would be nice if it was registering. sometimes it may show up in a few hours or a day generally a reboot and its gone again Thanks for any help in advance 73 Randy KB3HJC

5 9

Dual mode repeater
by Thomas Gernon 29 Nov '13

29 Nov '13

Hello thanks for the replay on the USB fob. One more question I would like to build a allstar /free star dual mode repeater I have a duch star mini hotspot and a beagle bone black is running the free star and I have a PC I would like to put acid on. I am going to mod a USB fob how do I connect it all. It will be full duplex. 73, VE3ETG Thomas Gernnon

1 0

scheduler
by Harry Romano 29 Nov '13

29 Nov '13

Hello, Could someone please tell me how to make a schedule for allstar that would turn on a specific node on a certain day and time. I'm also not sure where to insert the code. I would like to have the system automatically connect to the win system node 2560 at 10:30 pm pst on Friday nights. I also have a squelch tail on my repeater. Apparently the radio I am using does not close the tone squelch fast enough. Is there any way to get allstar to eliminate it. Harry Romano KC4RPP Skype: hromano777 Phone 1-239-455-1411

2 1

Id and voice message questions
by Doug Crompton 29 Nov '13

29 Nov '13

I have a couple of questions regarding ID and voice messages. I have both 'idrecording' and 'idtalkover' set to identify my call in CW. At times I get two ID's or one ID interrupts another and starts over when listening to a net of long duration with lots of interruptions. Should both of these be defined or can you define just one or the other. I don't mind the CWID being over the person talking. It doesn't make much sense to ID when someone drops from the network during a net as it would be continuing over the next person picking it up anyway. I also have a question about tail messages or messages sent out in general. What is the best way to send out a periodic voice message such that it doesn't appear on top of incoming audio? The tailmessage commands appear to do this but what if one wanted to send a message out at a specific time, say on the hour and not necessarily at a transmission tail. Is there a way to accomplish this and not have it voice over network or local audio which might be present? 73 Doug WA3DSP http://www.crompton.com/hamradio

1 0

(no subject)
by Jared Paxton 28 Nov '13

28 Nov '13

Can anyone tell me how I can get my node to announce my call sign then my node frequency and PL Code Thank you. Jared KB2JIP -- Sent From My Iphone 5 On AT&Ts 4G LTE Network

2 1

Trimble SVeeEight GPS to RTCM
by Gary Herzog Gmail 28 Nov '13

28 Nov '13

We are trying to interface a Trimble-SVeeEight-Plus to the RTCM. I am running the S/W Version: 1.38 10/09/2013 on the RTCM and I am seeing the GPS info listed below in Debug mode 32 but I think I may be having issues with the PPS. The Trimble indicates that it has a 10 microseconds negative going pulse I noticed that the Garmin GPS 78X LVC has a default pulse width of 100 milliseconds. I am wondering if the Trimble is too fast for the RTCM.. is this going to be a problem?? It appears that I cannot adjust the pulse width on the SVeeEight as its grayed out.. any ideas. Your help would be greatly appreciated. Thanks Gary Kc5daq.. The 1PPS signal is an open collector interface on pin 9 of Ports 1 and 2. The polarity of the PPS signal is an inverted, 10 microseconds negative going pulse with the falling edge synchronized to UTC GPS-DEBUG: $GPRMC,181436.0,A,3009.798,N,09550.252,W,000.00,000.0,251113,05.5,E*76 GPS-DEBUG: mon: 10, gps_time: 1385403276, ctime: Mon Nov 25 18:14:36 2013 GPS-DEBUG: $GPRMC,181437.0,A,3009.798,N,09550.252,W,000.00,000.0,251113,05.5,E*77 GPS-DEBUG: mon: 10, gps_time: 1385403277, ctime: Mon Nov 25 18:14:37 2013 GPS-DEBUG: $GPRMC,181438.0,A,3009.798,N,09550.251,W,000.00,000.0,251113,05.5,E*7B GPS-DEBUG: mon: 10, gps_time: 1385403278, ctime: Mon Nov 25 18:14:38 2013 GPS-DEBUG: $GPRMC,181439.0,A,3009.798,N,09550.251,W,000.00,000.0,251113,05.5,E*7A GPS-DEBUG: mon: 10, gps_time: 1385403279, ctime: Mon Nov 25 18:14:39 2013 GPS-DEBUG: $GPRMC,181440.0,A,3009.798,N,09550.251,W,000.00,000.0,251113,05.5,E*74 GPS-DEBUG: mon: 10, gps_time: 1385403280, ctime: Mon Nov 25 18:14:40 2013 GPS-DEBUG: $GPRMC,181441.0,A,3009.798,N,09550.251,W,000.00,000.0,251113,05.5,E*75 GPS-DEBUG: mon: 10, gps_time: 1385403281, ctime: Mon Nov 25 18:14:41 2013 GPS-DEBUG: $GPRMC,181442.0,A,3009.798,N,09550.251,W,000.00,000.0,251113,05.5,E*76 GPS-DEBUG: mon: 10, gps_time: 1385403282, ctime: Mon Nov 25 18:14:42 2013 GPS-DEBUG: $GPRMC,181443.0,A,3009.798,N,09550.250,W,000.00,000.0,251113,05.5,E*76 GPS-DEBUG: mon: 10, gps_time: 1385403283, ctime: Mon Nov 25 18:14:43 2013 GPS-DEBUG: $GPRMC,181444.0,A,3009.798,N,09550.250,W,000.00,000.0,251113,05.5,E*71 GPS-DEBUG: mon: 10, gps_time: 1385403284, ctime: Mon Nov 25 18:14:44 2013 GPS-DEBUG: $GPRMC,181445.0,A,3009.798,N,09550.250,W,000.00,000.0,251113,05.5,E*70 GPS-DEBUG: mon: 10, gps_time: 1385403285, ctime: Mon Nov 25 18:14:45 2013 GPS-DEBUG: $GPRMC,181446.0,A,3009.798,N,09550.250,W,000.00,000.0,251113,05.5,E*73 GPS-DEBUG: mon: 10, gps_time: 1385403286, ctime: Mon Nov 25 18:14:46 2013 GPS-DEBUG: $GPRMC,181447.0,A,3009.798,N,09550.250,W,000.00,000.0,251113,05.5,E*72 Enter Selection (1-27,97-99,r,q,d) : S/W Version: 1.38 10/09/2013 System Uptime: 1747.0 Secs IP Address: 192.168.33.80 Netmask: 255.255.255.0 Gateway: 192.168.33.1 Primary DNS: 192.168.33.1 Secondary DNS: 8.8.8.8 DHCP: 0 VOTER Server IP: 192.168.33.60 VOTER Server UDP Port: 667 OUR UDP Port: 667 GPS Lock: 0 Connected: 0 COR: 0 EXT CTCSS IN: 1 PTT: 0 RSSI: 0 Current Samples / Sec.: 0 Current Peak Audio Level: 53448 Squelch Noise Gain Value: 18, Diode Cal. Value: 40, SQL pot 400 Last Rx Pkt System time: <System Time Not Set>, diff: 0 msec Last Rx Pkt Timestamp time: <System Time Not Set>, diff: 0 msec Last Rx Pkt index: 0, inbounds: 0

4 5

Voice announcement
by Donny Parent 28 Nov '13

28 Nov '13

whats the best way to make a voice anouncement file and how do i put it in my allstar acid script to have it work? thanks Donny

3 2