November 2016 - App_rpt-users - lists.keekles.org

Another node server having stability issues
by C B 17 Feb '17

17 Feb '17

Please can someone help me find the answer to make my server / nodes reliable. The computer is a HP 5700 with one gig of ram. it locks up and or sends clicking sounds with key-ups to the rest of the linked system and or stops responding. I have re-installed DIAL cut back to one URI and it ran ok for several hours. when i checked it this morning it was in failure again. Any help appreciated. below are some log outputs that may help in finding out what is wrong. Chris Oct 24 05:14:22 N6LXX-OAK_GLEN kernel: [ 729.298590] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.3/0003:0D8C:013A.0047/input/input83Oct 24 05:14:22 N6LXX-OAK_GLEN kernel: [ 729.298811] hid-generic 0003:0D8C:013A.0047: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:1d.0-1/input3Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.550065] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.603061] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.656061] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.709060] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.756159] usb usb4-port1: disabled by hub (EMI?), re-enabling...Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.757898] usb 4-1: USB disconnect, device number 78Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 731.000024] usb 4-1: new full-speed USB device number 79 using uhci_hcdOct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 731.120027] usb 4-1: device descriptor read/64, error -71Oct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.430055] usb 4-1: New USB device found, idVendor=0d8c, idProduct=013aOct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.430059] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0Oct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.430062] usb 4-1: Product: USB PnP Sound DeviceOct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.430064] usb 4-1: Manufacturer: C-Media Electronics Inc. Oct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.526597] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.3/0003:0D8C:013A.0048/input/input84Oct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.527062] hid-generic 0003:0D8C:013A.0048: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:1d.0-1/input3Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.774068] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.827063] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.880068] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.933063] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.986061] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.988155] usb usb4-port1: disabled by hub (EMI?), re-enabling...Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.989902] usb 4-1: USB disconnect, device number 79Oct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.232025] usb 4-1: new full-speed USB device number 80 using uhci_hcdOct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.352023] usb 4-1: device descriptor read/64, error -71Oct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.662056] usb 4-1: New USB device found, idVendor=0d8c, idProduct=013aOct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.662060] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0Oct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.662063] usb 4-1: Product: USB PnP Sound DeviceOct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.662066] usb 4-1: Manufacturer: C-Media Electronics Inc. Oct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.758602] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.3/0003:0D8C:013A.0049/input/input85Oct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.759102] hid-generic 0003:0D8C:013A.0049: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:1d.0-1/input3Oct 24 05:14:27 N6LXX-OAK_GLEN kernel: [ 735.002056] retire_capture_urb: 494 callbacks suppressedOct 24 05:14:27 N6LXX-OAK_GLEN kernel: [ 735.030066] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:27 N6LXX-OAK_GLEN kernel: [ 735.083065] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:27 N6LXX-OAK_GLEN kernel: [ 735.136068] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:27 N6LXX-OAK_GLEN kernel: [ 735.189064] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.220156] usb usb4-port1: disabled by hub (EMI?), re-enabling...Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.221909] usb 4-1: USB disconnect, device number 80Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.464013] usb 4-1: new full-speed USB device number 81 using uhci_hcdOct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.584009] usb 4-1: device descriptor read/64, error -71Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.894060] usb 4-1: New USB device found, idVendor=0d8c, idProduct=013aOct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.894064] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.894066] usb 4-1: Product: USB PnP Sound DeviceOct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.894069] usb 4-1: Manufacturer: C-Media Electronics Inc. Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.990595] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.3/0003:0D8C:013A.004A/input/input86Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.990816] hid-generic 0003:0D8C:013A.004A: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:1d.0-1/input3 -- Hungup 'DAHDI/pseudo-233330804' == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:36] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:37] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 -- Hungup 'DAHDI/pseudo-688755356' == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:38] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:39] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:41] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:41] WARNING[713]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb29894][Oct 24 05:56:41] WARNING[713]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb29894] wasn't stuck after all.[Oct 24 05:56:41] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:43] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:43] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:45] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:45] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:47] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:48] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 -- Hungup 'DAHDI/pseudo-2067220005'

4 5

Podcast Server
by Danny 02 Dec '16

02 Dec '16

Hi, I have setup a server that plays Amateur Radio related podcasts, I call it "Play Something". Every time a request is recieved (via e-mail) by a (registered) callsign, the system plays one of these podcasts to all connected nodes. This is for all to use. Some of the podcasts are: Everything Ham Radio QSO Today This week in Amateur Radio Foundations of Amateur Radio Ted Randall and many more ... To register for this do the following: Send mail to:allstar44081@gmail.com The "Subject" should only contain the word "Register" The "Body" should contain the following "??CALLSIGN:E-MAIL_ADDRESS:A_PASSWORD??" Note the "??" at the start and end and the ":" in between. Nothing else should be in the body. After you have registered you will receive a replay instructing you on how to use the system. One caveat, Apple iPhones do not translate/parse/send "Subject" lines according to mail standards. So please use any other means to register. Thank you Danny ZS6XOX AllStar 44081 EchoLink ZS6XOX-R 73's

3 4

USB FOB not affecting Pin 13 to PTT
by no1pc＠yahoo.com 26 Nov '16

26 Nov '16

I have a few USB fobs resembling the one shown in the document titled "USB FOB to DB25 Interface" Unfortunately the chip itself is potted die-on-board so access to signalling lines is limited to the additional components on board, which should seem simple enough to get to Pin 13 that feeds the Red LED to extract a PTT signal. (I am able to assert COS- to Volume down and get received audio "to the net" experienced with WebTransceiver.) Unfortunately metering 'every' available connection and toggling WebTransceiver's Key/Transmit, none of the signal lines on the board react. I could imagine one line or the other might be open-collector and I'd have to add a pull-up to see a transition, but with the LED still in-circuit I'd think that would react. (The Green LED works as heartbeat just fine.) Before I head to the local Frys and buy 1-2 each every fob they have to gut to see if I could get to the chip pins directly (or try to be patient and wait for Amazon)... ... I'm sitting here looking at a fully functional micro with a LOT of GPIO pins available... wondering why, aside from the IRLP s/w and interface options available... doesn't an AllStar implementation leverage the on-board signalling? I see there is Python code around to work with the GPIO, but not quite yet sure how or if I could create and call PTT and COR (and CTCSS) sense scripts within the AllStar configuration - ??? I know it would split out the radio audio v PTT/COS wiring harness just a bit vs the cute USB thing, but what the heck - buffer/interface parts on a small perf board tied to the GPIO pins and done? No? Am I missing something? Code- and instructions-to-be? Using Pi 3 Model B v 1.2 BTW, uname -a yields: "Linux barf3 3.18.0-trunk-rpi2 #1 SMP PREEMPT Debian 3.18.5-1~exp1.co1 (2015-02-02) armv7l GNU/Linux"

4 5

Verizon Wireless Hot Spot Connections Help
by k7ksn＠yahoo.com 26 Nov '16

26 Nov '16

Good Evening, I am trying to utilize a portable Node utilizing a RPi 3 running the Crompton RPi2-3_V1.02beta_Allstar.img and my personal hotspot on my Verizon Wireless iPhone. I have followed the Wireless How-To on the Crompton website, in fact I have even exchanged several emails with Doug and still no luck. First and foremost, my node is up and working connected to my home router with an ethernet cable, it's when I go wireless that I have issues. I have cleared the WPA file as suggested and only have my iPhone wireless saved. When I enable the wireless on the RPi3 and do an ifconfig, I see an IP assigned I am assuming by Verizon Wireless? I wait approximately 10-15 minutes for my node to populate and try to connect to another node and my node tells me the connection has failed. Thinking I may have a bad RPi3, I have tried this with two other RPi3's. Further when I try and connect wireless to my home router, again I clear the WPA file and save just my home router SSID and passphrase. The ifconfig shows a different IP address on my subnet than the one static ip assigned my wired adapter. When I attempt to ping any other device on my home subnet it says it's unavailable. I also cannot ping the wireless node. What Am I missing? I have also heard that Verizon Wireless blocks certain ports and some recommend using a VPN. 73's Brien Morris - K7KSN

2 1

Anyone have MPLAB C compiler?
by Sam Skolfield 25 Nov '16

25 Nov '16

Hello all, It appears as if the link in the " votersystem.pdf " for the MPLAB C Compiler for PIC24 and dsPIC v3.25 in LITE mode points to a page that indicates the download is no longer available. I've done quite a bit of googling for an alternate source, and can find nothing. Does anyone still have a copy they could send my way? I have a couple of voter boards running 1.07 (09/15/2012) and they keep hiccuping, dropping PTT and connection to server whenever transmitting. I have a PICkit 3 and want to try blowing the latest firmware in to see if it fixes. Thanks, -- KJ6QFS Sam Skolfield

4 8

Requesting a second node number
by John McKain 21 Nov '16

21 Nov '16

Just a quick question. I currently have a AllStar node 29063 running. It is also configured as a server on the AllStarlink.org system portal. I want to bring up another stand alone node and need another node number. When requesting an additional node through the portal, do I get a node number under my server name, or do I request a new server and a node number will come with that? Thanks, John K6jrm

2 1

Some questions regarding Apt-RPT and AllStarLink
by Jeremy Utley 21 Nov '16

21 Nov '16

Hello all! Relatively new to Apt_rpt and AllStar, so forgive me if this is a rehash of something that's already been done. I've recently been put in charge of maintenance of our local 2m repeater for our club. I'm new to running repeaters, so I wanted to really learn by doing, and am planning to do this by rebuilding old, currently defunct 440 machine that's been off the air for a year now. I've already been in touch with the local freq coordinator, and ensured we are still coordinated on our old frequency, and we're currently in the hardware acquisition phase. I'm planning to use AllStar DIAL on an RPI-3 as the controller for the new repeater, and if all goes well, I'll eventually replace the current NHRC-3 controller on the 2-meter side with another Pi-3 running Dial, and set up a permanent link between the 2m and 440 machines. Question 1 is related to the underlying networking. Our repeater site is a tower for a rural wireless ISP, so it already has internet connectivity there. The problem is, the guy running the ISP has some "odd" opinions on how to run things, and is stubborn enough to not listen to reason as to why what he's doing is a bad idea - the end result being the systems will be behind a Double-NAT, with what amounts to no possibility to do proper port-forwarding to AllStar. Leaving this tower site is pretty impatctical (the guy running the site is also a ham, and actually lets us use the site for free), so I've been trying to come up with a way to get around this port-forwarding issue. As an IT guy by trade myself, I do have access to a co-located server with multiple IPv4 IP's allocated to it. So my thinking is, at the repeater site, I'll set up a Microtik router, that establishes an OpenVPN connection to my colo server. Each of the RPi's will be tunneled via the OpenVPN connection to the colo server, and use it's own dedicated IP address from there. In theory, this would remove the double-NAT, effectively replacing it with a single NAT layer that I control totally. I don't see any real reason this could not work from a network standpoint (I've done similar things at work in the past using VPN tunnels), but maybe there's something specific to the AllStarLink software that precludes this from working. The more I think about it, I could potentially even use an Ethernet bridge at the machine in the colo and simply provide public IP's across the VPN tunnel, effectively eliminating NAT altogether. Question 2 is more of a policy question - I've registered my personal callsign with AllStar, and gotten a node number for a simplex link that's going to be my first node on the network (to learn a little more before I actually start to build the new repeater). Should I also register our club callsign and set up the repeater nodes under that (I am the trustee for the club call), or make additional nodes under my personal call for those? Thanks for your time in reading thru this, and for the help! Jeremy Utley, NQ0M Iola, KS

2 1

Re: [App_rpt-users] Registration Check
by Steve Mahler 19 Nov '16

19 Nov '16

This issue has been resolved with the help of M0HOY. The fixing step was changing a home router so the Port Forwarding for 5679 was listed as UDP instead of BOTH (udp & ip). I don't understand why this worked, but I am happy. ...STeve On 11/19/2016 1:02 PM, Steve Mahler wrote: > > Stephen: > > Wow, changing from BOTH to UDP made it work. Crazy and doesn't bode > well for the ASUS home router software! THANK-YOU for your assistance. > > ...STeve > > > On 11/19/2016 12:31 PM, Stephen Curtis wrote: >> Ha Ha, >> >> No if they are on different public IP addresses none of what I have >> said applies! :) >> >> What I would suggest is that you set your 4569 ports to UDP not not both. >> >> when you are in the CLI> >> do an iax2 show registry >> >> Just to check they are both registered correctly with allstar. >> >> >> Steve :) >> >> >> >> >>> On 19 Nov 2016, at 18:25, Steve Mahler <kizzy(a)lusfiber.net >>> <mailto:kizzy@lusfiber.net>> wrote: >>> >>> Stephen: >>> >>> Nuts, I guess I should have mentioned that the two servers (each >>> with one node) are on two different public IP addresses. So, does >>> your suggestion still apply? >>> >>> ...STeve >>> >>> >>> On 11/19/2016 12:07 PM, Stephen Curtis wrote: >>>> Ok what you need to do is change the bind port for your second node >>>> to 4568 because they can’t both be on the same port. You will need >>>> to add this as a UDP port in your router and also change from 4569 >>>> to 4568 on the allstarlink.org <http://allstarlink.org/> website >>>> under network settings. >>>> >>>> node 42316 >>>> >>>> It is at the top of the config file: >>>> >>>> iax.conf >>>> >>>> bindport=4568 >>>> >>>> Then in the rpt.conf for each node you will need: >>>> >>>>> rpt.conf for 42315 ... >>>>> >>>>> 42315 = radio@127.0.0.1:4569/42315,NONE >>>>> >>>>> 42316 = radio@ipaddress:4568/42316,NONE >>>> >>>> >>>>> rpt.conf for 42316 ... >>>>> >>>>> 42316 = radio@127.0.0.1:4568/42316,NONE >>>>> >>>>> 42315 = radio@ipaddress:4569/42315,NONE >>>> >>>> >>>> >>>> >>>> Cheers >>>> >>>> Steve >>>> >>>> >>>> >>>> >>>>> On 19 Nov 2016, at 17:42, Steve Mahler <kizzy(a)lusfiber.net >>>>> <mailto:kizzy@lusfiber.net>> wrote: >>>>> >>>>> Stephen: >>>>> >>>>> Thanks for the reply. Each node number is on its own server. >>>>> >>>>> On each server ... >>>>> >>>>> rpt.conf for 42315 ... >>>>> >>>>> 42315 = radio@127.0.0.1:4569/42315,NONE >>>>> >>>>> rpt.conf for 42316 ... >>>>> >>>>> 42316 = radio@127.0.0.1:4569/42316,NONE >>>>> >>>>> iax.conf for each node (on separate servers) have the registration >>>>> line >>>>> >>>>> in 42315 ... register = 42315:000000@register.allstarlink.org (pw >>>>> changed) >>>>> >>>>> in 42316 ... register = 42316:111111@register.allstarlink.org (pw >>>>> changed) >>>>> >>>>> The FAQ points to checking the registration in the AllStar DB. >>>>> Apparently a "forcing" of port 4569 is necessary in some cases. >>>>> That is what I am trying to run down. >>>>> >>>>> Thanks again, >>>>> >>>>> ...STeve >>>>> >>>>> >>>>> On 11/19/2016 10:45 AM, Stephen Curtis wrote: >>>>>> Sorry, forgot to check if both nodes are on the same machine? >>>>>> >>>>>> Cheers >>>>>> >>>>>> Steve M0HOY >>>>>> >>>>>> >>>>>>> On 19 Nov 2016, at 16:15, Steve Mahler <kizzy(a)lusfiber.net >>>>>>> <mailto:kizzy@lusfiber.net>> wrote: >>>>>>> >>>>>>> Morning! I have two nodes (42315 and 42316). Both nodes can >>>>>>> connect outbound to other servers). >>>>>>> >>>>>>> 1) Node 42315 can connect outbound to 42316. >>>>>>> >>>>>>> 2) Node 42316 can NOT connect outbound to 42315. >>>>>>> >>>>>>> 3) I've checked the 42315 router ... ASUS router ... >>>>>>> portforwarding shown below. >>>>>>> >>>>>>> 4) Looking for someone to confirm that 42315 is properly >>>>>>> registered in the DB. >>>>>>> >>>>>>> ...STeve - KF5VH >>>>>>> >>>>>>> >>>>>>> Service Name Port Range <javascript:void(0);> Local IP >>>>>>> <javascript:void(0);> Local Port <javascript:void(0);> Protocol >>>>>>> >>>>>>> >>>>>>> ALLSTAR-IAX 4569 192.168.1.199 4569 BOTH >>>>>>> ECHOLINK-5198 5198 192.168.1.199 5198 BOTH >>>>>>> ECHOLINK-5199 5199 192.168.1.199 5199 BOTH >>>>>>> ALLSTAR-API 5038 192.168.1.199 5038 BOTH >>>>>>> >>>>>>> _______________________________________________ >>>>>>> App_rpt-users mailing list >>>>>>> App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> >>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>>> >>>>>>> To unsubscribe from this list please visit >>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and >>>>>>> scroll down to the bottom of the page. Enter your email address >>>>>>> and press the "Unsubscribe or edit options button" >>>>>>> You do not need a password to unsubscribe, you can do it via >>>>>>> email confirmation. If you have trouble unsubscribing, please >>>>>>> send a message to the list detailing the problem. >>>>>> >>>>> >>>> >>> >> >

1 0

Registration Check
by Steve Mahler 19 Nov '16

19 Nov '16

Morning! I have two nodes (42315 and 42316). Both nodes can connect outbound to other servers). 1) Node 42315 can connect outbound to 42316. 2) Node 42316 can NOT connect outbound to 42315. 3) I've checked the 42315 router ... ASUS router ... portforwarding shown below. 4) Looking for someone to confirm that 42315 is properly registered in the DB. ...STeve - KF5VH Service Name Port Range <javascript:void(0);> Local IP <javascript:void(0);> Local Port <javascript:void(0);> Protocol ALLSTAR-IAX 4569 192.168.1.199 4569 BOTH ECHOLINK-5198 5198 192.168.1.199 5198 BOTH ECHOLINK-5199 5199 192.168.1.199 5199 BOTH ALLSTAR-API 5038 192.168.1.199 5038 BOTH

1 0

Re: [App_rpt-users] Allstar Financial Donation
by Tom 18 Nov '16

18 Nov '16

A URL won't work with PayPal. Send donation at PayPal to email: <mailto:telesistant@hotmail.com> telesistant(a)hotmail.com . That's Jim Duuuude. Regards, Tom / K5TRA

1 0