March 2006 - App_rpt-users - lists.keekles.org

[App_rpt] Newbie question
by Carlos . 22 Mar '06

22 Mar '06

Hi. I am a newcomer to the app_rpt world. I bought a pciradio board some time ago and now I´m starting with the documents to install a remote radio system. I´ve installed an Asterisk@home and got it running now. Now I see in the "how-to" doc some guides about installing asterisk and some files. My question is: is necessary to perform all the described steps or is all of it included in the asterisk@home distribution ? I´ve tried "modprobe zaptel", "modprobe pciradio" and returned no error, so I suppose only have to edit the conf files. Is this correct ? And another one: has anyone the conf files to support both phone lines (digium boards) and pciradio in the same machine ? Thanks for all your help. Greetings from Spain Carlos

2 1

Re: [App_rpt] COP Functions
by James Harfield 17 Mar '06

17 Mar '06

Sent you an e-mail with some questions, Jim. Still no luck getting it working on our end but I'm trying different stuff day to day. JRH >>> telesistant(a)hotmail.com 03/16/06 11:10 AM >>> James, I replied to you privately yesterday. Let me just talk to you, and have access to your system, and well see what the problem really is. Jim WB6NIL >From: "James Harfield" <harfija(a)auburn.edu> >Reply-To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> >To: <app_rpt(a)lists.illiana.net> >Subject: Re: [App_rpt] COP Functions >Date: Thu, 16 Mar 2006 09:15:28 -0600 >MIME-Version: 1.0 >Received: from lists.illiana.net ([207.227.243.140]) by >bay0-mc12-f10.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.1830); Thu, >16 Mar 2006 07:16:10 -0800 >Received: (qmail 21026 invoked from network); 16 Mar 2006 15:16:09 -0000 >Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1) by 0 with SMTP; 16 >Mar 2006 15:16:09 -0000 >Received: (qmail 21013 invoked from network); 16 Mar 2006 15:16:07 -0000 >Received: from d1.duc.auburn.edu (131.204.2.2)by 0 with SMTP; 16 Mar 2006 >15:16:07 -0000 >Received: from TMIA1.AUBURN.EDU (tmia1.auburn.edu [131.204.3.30])by >d1.duc.auburn.edu (8.13.4/8.13.4) with ESMTP id k2GFG6cq006547for ><app_rpt(a)lists.illiana.net>; Thu, 16 Mar 2006 09:16:06 -0600 (CST) >Received: from zTMIA1-MTA by TMIA1.AUBURN.EDUwith Novell_GroupWise; Thu, 16 >Mar 2006 09:16:06 -0600 >X-Message-Info: 6sSXyD95QpXnHStgs5f13BGoCTtHNMaxAIpI1fZkJMU= >Return-Path: <harfija(a)auburn.edu> >Delivered-To: mailman-app_rpt(a)lists.illiana.net >X-Mailer: Novell GroupWise Internet Agent 7.0 X-BeenThere: >app_rpt(a)lists.illiana.net >X-Mailman-Version: 2.1.6 >Precedence: list >List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net> >List-Unsubscribe: ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request@lists.illiana.net?subject=unsubscribe> >List-Archive: <http://lists.illiana.net/pipermail/app_rpt> >List-Post: <mailto:app_rpt@lists.illiana.net> >List-Help: <mailto:app_rpt-request@lists.illiana.net?subject=help> >List-Subscribe: ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request@lists.illiana.net?subject=subscribe> >Errors-To: app_rpt-bounces(a)lists.illiana.net >X-OriginalArrivalTime: 16 Mar 2006 15:16:10.0257 (UTC) >FILETIME=[8E4E5010:01C6490C] > >Steve, > >This is the output from the debug . . > >*CLI> @@@@ Digits collected: 8, source: 3 >@@@@ Digits collected: 88, source: 3 >@@@@ action: cop, param = 6 >@@@@ table index i = 0 > >For *99 and the test tone, which does key the radio and works the output >is.. > >*CLI> @@@@ Digits collected: 9, source: 3 >@@@@ Digits collected: 99, source: 3 >@@@@ action: cop, param = 4 >@@@@ table index i = 0 > >Anything else you need? The debug looks as if it sees 88 and knows >param = 6 is being executed. I'm at a loss as to what could be >happening. > >Thanks, >JRH > > >>> hwstar(a)rodgers.sdcoxmail.com 03/15/06 10:41 PM >>> >James, > >I tried your config file on my system (had to change the node and the >zap >channel, but everything else remained the same), and *88 keyed the >transmitter over the phone as it should be. Now I'm scratching my >head.... > >The next thing to try: > >Issue "rpt debug level 1" from the real asterisk console ( asterisk >-vvvvvvc, >and not asterisk -r) and see if you can see the DTMF digits being >processed >by app_rpt. > >You should see something like this: > >@@@@ Digits collected: 88, source: 0 >@@@@ action: cop, param = 6 >@@@@ table index i = 0 > > >BTW: cop.6 has no effect when dialed on a radio or link channel. Cop,6 >is for >use on a phone dial-in only. I'd suggest removing these from your other >function tables. > >Steve, >WA6ZFT > > > > >On Wednesday 15 March 2006 14:18, James Harfield wrote: > > As requested rpt.conf: > > > > [1999] ; Name of First Repeater > > > > rxchannel = Zap/1 ; Rx audio/signalling channel > > ; Note: if you use a unified interface (tx/rx on one channel), only > > ; specify the rxchannel and the txchannel will be assumed from the > > rxchannel > > functions=functions ; Repeater Function Table > > ; > > ; Added phone_functions=phone_functions > > ; > > phone_functions = phone_functions ;phone functions table > > link_functions=link-functions ; Link Function Table > > telemetry=telemetry ; Telemetry descriptions > > wait_times=wait-times ; Wait times > > context = radio ; dialing context for >phone > > callerid = "Your Repeater" <6198192562> ; callerid for phone calls > > idrecording = /etc/asterisk/id ; id recording > > accountcode=RADIO ; account code (optional) > > hangtime=1000 ; squelch tail hang time (in ms) > > (optional) > > totime=90000 ; transmit time-out time (in ms) > > (optional) > > idtime=180000 ; id interval time (in ms) > > (optional) > > ; > > ;Added duplex=2 > > ; > > ;duplex=2 > > > > ; The default values for hangtime, time-out time, and id interval time > > are > > ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 >ms) > > ; respectively > > > > politeid=30000 ; time in milliseconds >before ID > > timer > > ; expires to try and ID in the > > tail. > > ; (optional, default is 30000). > > idtalkover=|iid/r ; Talkover ID (optional) default > > is none > > unlinkedct=ct2 ; unlinked courtesy tone > > (optional) default is none > > > > ; > > ; Repeater function table for node 010 > > ; > > > > [functions] > > 1=ilink,1 ; Specific link disconnect > > 2=ilink,2 ; Specific Link connect - > > monitor only > > 3=ilink,3 ; Specific Link connect - > > transceive > > 4=ilink,4 ; Enter command mode on a > > specific link > > 7=ilink,5 ; Link status > > > > 80=status,1 ; System info > > 81=status,2 ; Time > > 82=status,3 ; app_rpt.c Version > > > > 6=autopatchup ; Autopatch up > > 0=autopatchdn ; Autopatch down > > > > ; > > ;Added cop,6 in this context just to see if it would recognize cop,6 > > ; > > 88=cop,6 ; PTT Radio > > 99=cop,4 ; Audio test tone > > > > > > ; > > ;Added phone_functions table for the phone_functions=phone_functions > > ; > > [phone_functions] > > > > 1=ilink,1 ; Specific link disconnect > > 2=ilink,2 ; Specific Link connect - > > monitor only > > 3=ilink,3 ; Specific Link connect - > > transceive > > 4=ilink,4 ; Enter command mode on a > > specific link > > 7=ilink,5 ; Link status > > > > 80=status,1 ; System info > > 81=status,2 ; Time > > 82=status,3 ; app_rpt.c Version > > > > > > ; > > ;Added cop,1 - cop,6 for testing purposes. > > ; > > 84=cop,1 ;warm boot > > 85=cop,2 ;system enable > > 86=cop,3 ;system disable > > 87=cop,5 ;debug mode > > 88=cop,6 ;system PTT > > > > 6=autopatchup ; Autopatch up > > 0=autopatchdn ; Autopatch down > > > > 99=cop,4 ; Audio test tone > > > > > > ; > > ; Link function table > > ; > > ; If this section is defined, then the remote user accessing our >machine > > in command mode > > ; will only be able to do the functions defined in this section. If >this > > section is > > ; omitted, then the link functions will be the same as the repeater > > functions. > > ; > > > > > > [link-functions] > > 1=ilink,1 ; Specific link disconnect > > 2=ilink,2 ; Specific Link connect - > > monitor only > > 3=ilink,3 ; Specific Link connect - > > transceive > > 7=ilink,5 ; Link status > > > > > > 80=status,1 ; System info > > 81=status,2 ; Time > > 82=status,3 ; app_rpt.c Version > > > > > > 6=autopatchup ; Autopatch up > > 0=autopatchdn ; Autopatch down > > 84=cop,1 ;warm boot > > 85=cop,2 ;system enable > > 86=cop,3 ;system disable > > 87=cop,5 ;debug mode > > 88=cop,6 ;system PTT > > > > 99=cop,4 ; Audio test tone > > > > [telemetry] > > > > ; Telemetry entries can be shared across all repeaters, or defined for > > each repeater. > > ; Can be a tone sequence, morse string, or a file > > ; > > ; |t - Tone escape sequence > > ; > > ; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, > > duration, amplitude) > > ; Single frequencies are created by setting freq1 or freq2 to zero. > > ; > > ; |m - Morse escape sequence > > ; > > ; Sends Morse code at the telemetry amplitude and telemetry frequency >as > > defined in the > > ; [morse] section. > > ; > > ; Follow with an alphanumeric string > > ; > > ; |i - Morse ID escape sequence > > ; > > ; Sends Morse code at the ID amplitude and ID frequency as defined in > > the > > ; [morse] section. > > ; > > ; Follow with an alphanumeric string > > > > > > ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) > > ct2=|t(660,880,150,2048) > > ct3=|t(440,0,150,2048) > > ct4=|t(550,0,150,2048) > > ct5=|t(660,0,150,2048) > > ct6=|t(880,0,150,2048) > > ct7=|t(660,440,150,2048) > > ct8=|t(700,1100,150,2048) > > remotetx=|t(1633,0,75,2048)(0,0,75,0)(1209,0,75,2048); > > remotemon=|t(1209,0,75,2048) > > cmdmode=|t(900,903,200,2048) > > functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) > > > > ; > > ; Morse code parameters, these are common to all repeaters. > > ; > > > > [morse] > > > > speed=20 ; Approximate speed in WPM > > frequency=800 ; Morse Telemetry Frequency > > amplitude=4096 ; Morse Telemetry Amplitude > > idfrequency=1064 ; Morse ID Frequency > > idamplitude=3072 ; Morse ID Amplitude > > > > ; > > ; This section allows wait times for telemetry events to be adjusted > > ; A section for wait times can be defined for every repeater > > ; > > > > [wait-times] > > > > telemwait=1750 ; Time to wait before sending > > most telemetry > > idwait=500 ; Time to wait before starting > > ID > > unkeywait=1000 ; Time to wait after unkey > > before sending CT's and link telemetry > > calltermwait=1500 ; Time to wait before >announcing > > "call terminated" > > > > ; > > ; This is where you define your nodes which cam be connected to. > > ; > > > > [nodes] > > 1999 = radio(a)127.0.0.1/1999 ; This must be changed to your IP > > address > > > > We added cop,6 to the regular functions table and the link functions > > table just to test and see if it was picking up only those functions > > instead, since there was a comment that if link functions were enabled > > then the remote user would only have access to them. > > > > Here is the extensions.conf for connecting to the radio: > > > > exten => 305,1,Rpt,1999|P > > > > ulaw is allowed in both IAX.conf and SIP.conf that we are using to >dial > > the radio. Does this need to be changed as well? Trying to add as >much > > info I can think of. > > > > Thanks, > > > > JRH > > > > >>> hwstar(a)rodgers.sdcoxmail.com 03/15/06 2:57 PM >>> > > > > It probably would be a good idea to attach your rpt.conf file to the > > thread. > > > > Steve > > WA6ZFT > > > > > From: "James Harfield" <harfija(a)auburn.edu> > > > Date: 2006/03/15 Wed PM 12:29:28 PST > > > To: <app_rpt(a)lists.illiana.net> > > > Subject: Re: [App_rpt] COP Functions > > > > > > That's what I figure as well. I've tried Softphone, Cell phone, >land > > > > phone. All the default ilink and status functions work, along with > > cop,4 to initiate the test tone. But cop,6 won't key the radio. > > > > > >>> telesistant(a)hotmail.com 3/15/2006 2:21 PM >>> > > > > > > Well, if you have cop,6 defined as *88, and you are comming in with > > > > the P > > > > > option, and you > > > have phone_functions = phone_functions, then you definitely should >be > > > > able > > > > > to key the > > > radio from the phone by dialing *88 (from the phone and only from >the > > > phone). > > > > > > Jim, WB6NIL > > > > > > >From: "James Harfield" <harfija(a)auburn.edu> > > > >Reply-To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > > > >To: <app_rpt(a)lists.illiana.net> > > > >Subject: [App_rpt] COP Functions > > > >Date: Wed, 15 Mar 2006 13:11:02 -0600 > > > >MIME-Version: 1.0 > > > >Received: from lists.illiana.net ([207.227.243.140]) by > > > >bay0-mc12-f14.bay0.hotmail.com with Microsoft >SMTPSVC(6.0.3790.1830); > > > > Wed, > > > > > >15 Mar 2006 11:12:02 -0800 > > > >Received: (qmail 25119 invoked from network); 15 Mar 2006 19:12:00 > > > > -0000 > > > > > >Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1) by 0 with > > > > SMTP; 15 > > > > > >Mar 2006 19:12:00 -0000 > > > >Received: (qmail 25092 invoked from network); 15 Mar 2006 19:11:52 > > > > -0000 > > > > > >Received: from d1.duc.auburn.edu (131.204.2.2)by 0 with SMTP; 15 >Mar > > > > 2006 > > > > > >19:11:52 -0000 > > > >Received: from TMIA1.AUBURN.EDU (tmia1.auburn.edu [131.204.3.30])by > > > >d1.duc.auburn.edu (8.13.4/8.13.4) with ESMTP id k2FJBjbE013830for > > > ><app_rpt(a)lists.illiana.net>; Wed, 15 Mar 2006 13:11:49 -0600 (CST) > > > >Received: from zTMIA1-MTA by TMIA1.AUBURN.EDUwith Novell_GroupWise; > > > > Wed, 15 > > > > > >Mar 2006 13:11:45 -0600 > > > >X-Message-Info: 6sSXyD95QpVMWPCRYsLAxQFjIgPjv7anT7L4spyjmhA= > > > >Return-Path: <harfija(a)auburn.edu> > > > >Delivered-To: mailman-app_rpt(a)lists.illiana.net > > > >X-Mailer: Novell GroupWise Internet Agent 7.0 X-BeenThere: > > > >app_rpt(a)lists.illiana.net > > > >X-Mailman-Version: 2.1.6 > > > >Precedence: list > > > >List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net> > > > >List-Unsubscribe: > > > > > > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-reques > > >t(a)lists.illiana.net?subject=unsubscribe> > > > > > > >List-Archive: <http://lists.illiana.net/pipermail/app_rpt> > > > >List-Post: <mailto:app_rpt@lists.illiana.net> > > > >List-Help: <mailto:app_rpt-request@lists.illiana.net?subject=help> > > > >List-Subscribe: > > > > > > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-reques > > >t(a)lists.illiana.net?subject=subscribe> > > > > > > >Errors-To: app_rpt-bounces(a)lists.illiana.net > > > >X-OriginalArrivalTime: 15 Mar 2006 19:12:03.0471 (UTC) > > > >FILETIME=[57DDA1F0:01C64864] > > > > > > > >I'm having a problem getting cop,6 to function correctly in PTT'ing > > > > the > > > > > >radio. > > > > > > > >I have phone_functions = phone_functions defined in rpt.conf and > > > > within the > > > > > >phone_functions heading I have: > > > >88 = cop,6 > > > >defined with the other cop, ilink, and status functions. When > > > > connecting > > > > > >to my base I use the |P option instead of |D for phone control. > > > > > > > >The problem I'm having is that cop,6 will not activate the base to > > > >transmit. All the status commands, System Info, Time, Version, and > > > > the > > > > > >test tone cop,4 command work fine. The radio keys up, the > > > > appropriate > > > > > >information is sent, and the radio is unkeyed. But cop,6 will not > > > > key it. > > > > > >What I can do is manually key the radio and then use *88 (for >cop,6) > > > > to > > > > > >talk and # when I want to end talking. I've tried to dig through >the > > > > code > > > > > >and look at the difference between cop,6 and cop,4 for activating >the > > > > base, > > > > > >but I'm quite confused as to why one can work and one cannot. > > > > > > > >Thanks, > > > > > > > >JRH > > > > > > > >_______________________________________________ > > > >App_rpt mailing list > > > >App_rpt(a)lists.illiana.net > > > >http://lists.illiana.net/mailman/listinfo/app_rpt > > > > > > _______________________________________________ > > > App_rpt mailing list > > > App_rpt(a)lists.illiana.net > > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > > > _______________________________________________ > > > App_rpt mailing list > > > App_rpt(a)lists.illiana.net > > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt >_______________________________________________ >App_rpt mailing list >App_rpt(a)lists.illiana.net >http://lists.illiana.net/mailman/listinfo/app_rpt > >_______________________________________________ >App_rpt mailing list >App_rpt(a)lists.illiana.net >http://lists.illiana.net/mailman/listinfo/app_rpt _______________________________________________ App_rpt mailing list App_rpt(a)lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt

1 0

Re: [App_rpt] COP Functions
by James Harfield 16 Mar '06

16 Mar '06

Steve, This is the output from the debug . . *CLI> @@@@ Digits collected: 8, source: 3 @@@@ Digits collected: 88, source: 3 @@@@ action: cop, param = 6 @@@@ table index i = 0 For *99 and the test tone, which does key the radio and works the output is.. *CLI> @@@@ Digits collected: 9, source: 3 @@@@ Digits collected: 99, source: 3 @@@@ action: cop, param = 4 @@@@ table index i = 0 Anything else you need? The debug looks as if it sees 88 and knows param = 6 is being executed. I'm at a loss as to what could be happening. Thanks, JRH >>> hwstar(a)rodgers.sdcoxmail.com 03/15/06 10:41 PM >>> James, I tried your config file on my system (had to change the node and the zap channel, but everything else remained the same), and *88 keyed the transmitter over the phone as it should be. Now I'm scratching my head.... The next thing to try: Issue "rpt debug level 1" from the real asterisk console ( asterisk -vvvvvvc, and not asterisk -r) and see if you can see the DTMF digits being processed by app_rpt. You should see something like this: @@@@ Digits collected: 88, source: 0 @@@@ action: cop, param = 6 @@@@ table index i = 0 BTW: cop.6 has no effect when dialed on a radio or link channel. Cop,6 is for use on a phone dial-in only. I'd suggest removing these from your other function tables. Steve, WA6ZFT On Wednesday 15 March 2006 14:18, James Harfield wrote: > As requested rpt.conf: > > [1999] ; Name of First Repeater > > rxchannel = Zap/1 ; Rx audio/signalling channel > ; Note: if you use a unified interface (tx/rx on one channel), only > ; specify the rxchannel and the txchannel will be assumed from the > rxchannel > functions=functions ; Repeater Function Table > ; > ; Added phone_functions=phone_functions > ; > phone_functions = phone_functions ;phone functions table > link_functions=link-functions ; Link Function Table > telemetry=telemetry ; Telemetry descriptions > wait_times=wait-times ; Wait times > context = radio ; dialing context for phone > callerid = "Your Repeater" <6198192562> ; callerid for phone calls > idrecording = /etc/asterisk/id ; id recording > accountcode=RADIO ; account code (optional) > hangtime=1000 ; squelch tail hang time (in ms) > (optional) > totime=90000 ; transmit time-out time (in ms) > (optional) > idtime=180000 ; id interval time (in ms) > (optional) > ; > ;Added duplex=2 > ; > ;duplex=2 > > ; The default values for hangtime, time-out time, and id interval time > are > ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms) > ; respectively > > politeid=30000 ; time in milliseconds before ID > timer > ; expires to try and ID in the > tail. > ; (optional, default is 30000). > idtalkover=|iid/r ; Talkover ID (optional) default > is none > unlinkedct=ct2 ; unlinked courtesy tone > (optional) default is none > > ; > ; Repeater function table for node 010 > ; > > [functions] > 1=ilink,1 ; Specific link disconnect > 2=ilink,2 ; Specific Link connect - > monitor only > 3=ilink,3 ; Specific Link connect - > transceive > 4=ilink,4 ; Enter command mode on a > specific link > 7=ilink,5 ; Link status > > 80=status,1 ; System info > 81=status,2 ; Time > 82=status,3 ; app_rpt.c Version > > 6=autopatchup ; Autopatch up > 0=autopatchdn ; Autopatch down > > ; > ;Added cop,6 in this context just to see if it would recognize cop,6 > ; > 88=cop,6 ; PTT Radio > 99=cop,4 ; Audio test tone > > > ; > ;Added phone_functions table for the phone_functions=phone_functions > ; > [phone_functions] > > 1=ilink,1 ; Specific link disconnect > 2=ilink,2 ; Specific Link connect - > monitor only > 3=ilink,3 ; Specific Link connect - > transceive > 4=ilink,4 ; Enter command mode on a > specific link > 7=ilink,5 ; Link status > > 80=status,1 ; System info > 81=status,2 ; Time > 82=status,3 ; app_rpt.c Version > > > ; > ;Added cop,1 - cop,6 for testing purposes. > ; > 84=cop,1 ;warm boot > 85=cop,2 ;system enable > 86=cop,3 ;system disable > 87=cop,5 ;debug mode > 88=cop,6 ;system PTT > > 6=autopatchup ; Autopatch up > 0=autopatchdn ; Autopatch down > > 99=cop,4 ; Audio test tone > > > ; > ; Link function table > ; > ; If this section is defined, then the remote user accessing our machine > in command mode > ; will only be able to do the functions defined in this section. If this > section is > ; omitted, then the link functions will be the same as the repeater > functions. > ; > > > [link-functions] > 1=ilink,1 ; Specific link disconnect > 2=ilink,2 ; Specific Link connect - > monitor only > 3=ilink,3 ; Specific Link connect - > transceive > 7=ilink,5 ; Link status > > > 80=status,1 ; System info > 81=status,2 ; Time > 82=status,3 ; app_rpt.c Version > > > 6=autopatchup ; Autopatch up > 0=autopatchdn ; Autopatch down > 84=cop,1 ;warm boot > 85=cop,2 ;system enable > 86=cop,3 ;system disable > 87=cop,5 ;debug mode > 88=cop,6 ;system PTT > > 99=cop,4 ; Audio test tone > > [telemetry] > > ; Telemetry entries can be shared across all repeaters, or defined for > each repeater. > ; Can be a tone sequence, morse string, or a file > ; > ; |t - Tone escape sequence > ; > ; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, > duration, amplitude) > ; Single frequencies are created by setting freq1 or freq2 to zero. > ; > ; |m - Morse escape sequence > ; > ; Sends Morse code at the telemetry amplitude and telemetry frequency as > defined in the > ; [morse] section. > ; > ; Follow with an alphanumeric string > ; > ; |i - Morse ID escape sequence > ; > ; Sends Morse code at the ID amplitude and ID frequency as defined in > the > ; [morse] section. > ; > ; Follow with an alphanumeric string > > > ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) > ct2=|t(660,880,150,2048) > ct3=|t(440,0,150,2048) > ct4=|t(550,0,150,2048) > ct5=|t(660,0,150,2048) > ct6=|t(880,0,150,2048) > ct7=|t(660,440,150,2048) > ct8=|t(700,1100,150,2048) > remotetx=|t(1633,0,75,2048)(0,0,75,0)(1209,0,75,2048); > remotemon=|t(1209,0,75,2048) > cmdmode=|t(900,903,200,2048) > functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) > > ; > ; Morse code parameters, these are common to all repeaters. > ; > > [morse] > > speed=20 ; Approximate speed in WPM > frequency=800 ; Morse Telemetry Frequency > amplitude=4096 ; Morse Telemetry Amplitude > idfrequency=1064 ; Morse ID Frequency > idamplitude=3072 ; Morse ID Amplitude > > ; > ; This section allows wait times for telemetry events to be adjusted > ; A section for wait times can be defined for every repeater > ; > > [wait-times] > > telemwait=1750 ; Time to wait before sending > most telemetry > idwait=500 ; Time to wait before starting > ID > unkeywait=1000 ; Time to wait after unkey > before sending CT's and link telemetry > calltermwait=1500 ; Time to wait before announcing > "call terminated" > > ; > ; This is where you define your nodes which cam be connected to. > ; > > [nodes] > 1999 = radio(a)127.0.0.1/1999 ; This must be changed to your IP > address > > We added cop,6 to the regular functions table and the link functions > table just to test and see if it was picking up only those functions > instead, since there was a comment that if link functions were enabled > then the remote user would only have access to them. > > Here is the extensions.conf for connecting to the radio: > > exten => 305,1,Rpt,1999|P > > ulaw is allowed in both IAX.conf and SIP.conf that we are using to dial > the radio. Does this need to be changed as well? Trying to add as much > info I can think of. > > Thanks, > > JRH > > >>> hwstar(a)rodgers.sdcoxmail.com 03/15/06 2:57 PM >>> > > It probably would be a good idea to attach your rpt.conf file to the > thread. > > Steve > WA6ZFT > > > From: "James Harfield" <harfija(a)auburn.edu> > > Date: 2006/03/15 Wed PM 12:29:28 PST > > To: <app_rpt(a)lists.illiana.net> > > Subject: Re: [App_rpt] COP Functions > > > > That's what I figure as well. I've tried Softphone, Cell phone, land > > phone. All the default ilink and status functions work, along with > cop,4 to initiate the test tone. But cop,6 won't key the radio. > > > >>> telesistant(a)hotmail.com 3/15/2006 2:21 PM >>> > > > > Well, if you have cop,6 defined as *88, and you are comming in with > > the P > > > option, and you > > have phone_functions = phone_functions, then you definitely should be > > able > > > to key the > > radio from the phone by dialing *88 (from the phone and only from the > > phone). > > > > Jim, WB6NIL > > > > >From: "James Harfield" <harfija(a)auburn.edu> > > >Reply-To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > > >To: <app_rpt(a)lists.illiana.net> > > >Subject: [App_rpt] COP Functions > > >Date: Wed, 15 Mar 2006 13:11:02 -0600 > > >MIME-Version: 1.0 > > >Received: from lists.illiana.net ([207.227.243.140]) by > > >bay0-mc12-f14.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.1830); > > Wed, > > > >15 Mar 2006 11:12:02 -0800 > > >Received: (qmail 25119 invoked from network); 15 Mar 2006 19:12:00 > > -0000 > > > >Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1) by 0 with > > SMTP; 15 > > > >Mar 2006 19:12:00 -0000 > > >Received: (qmail 25092 invoked from network); 15 Mar 2006 19:11:52 > > -0000 > > > >Received: from d1.duc.auburn.edu (131.204.2.2)by 0 with SMTP; 15 Mar > > 2006 > > > >19:11:52 -0000 > > >Received: from TMIA1.AUBURN.EDU (tmia1.auburn.edu [131.204.3.30])by > > >d1.duc.auburn.edu (8.13.4/8.13.4) with ESMTP id k2FJBjbE013830for > > ><app_rpt(a)lists.illiana.net>; Wed, 15 Mar 2006 13:11:49 -0600 (CST) > > >Received: from zTMIA1-MTA by TMIA1.AUBURN.EDUwith Novell_GroupWise; > > Wed, 15 > > > >Mar 2006 13:11:45 -0600 > > >X-Message-Info: 6sSXyD95QpVMWPCRYsLAxQFjIgPjv7anT7L4spyjmhA= > > >Return-Path: <harfija(a)auburn.edu> > > >Delivered-To: mailman-app_rpt(a)lists.illiana.net > > >X-Mailer: Novell GroupWise Internet Agent 7.0 X-BeenThere: > > >app_rpt(a)lists.illiana.net > > >X-Mailman-Version: 2.1.6 > > >Precedence: list > > >List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net> > > >List-Unsubscribe: > > > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-reques > >t(a)lists.illiana.net?subject=unsubscribe> > > > > >List-Archive: <http://lists.illiana.net/pipermail/app_rpt> > > >List-Post: <mailto:app_rpt@lists.illiana.net> > > >List-Help: <mailto:app_rpt-request@lists.illiana.net?subject=help> > > >List-Subscribe: > > > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-reques > >t(a)lists.illiana.net?subject=subscribe> > > > > >Errors-To: app_rpt-bounces(a)lists.illiana.net > > >X-OriginalArrivalTime: 15 Mar 2006 19:12:03.0471 (UTC) > > >FILETIME=[57DDA1F0:01C64864] > > > > > >I'm having a problem getting cop,6 to function correctly in PTT'ing > > the > > > >radio. > > > > > >I have phone_functions = phone_functions defined in rpt.conf and > > within the > > > >phone_functions heading I have: > > >88 = cop,6 > > >defined with the other cop, ilink, and status functions. When > > connecting > > > >to my base I use the |P option instead of |D for phone control. > > > > > >The problem I'm having is that cop,6 will not activate the base to > > >transmit. All the status commands, System Info, Time, Version, and > > the > > > >test tone cop,4 command work fine. The radio keys up, the > > appropriate > > > >information is sent, and the radio is unkeyed. But cop,6 will not > > key it. > > > >What I can do is manually key the radio and then use *88 (for cop,6) > > to > > > >talk and # when I want to end talking. I've tried to dig through the > > code > > > >and look at the difference between cop,6 and cop,4 for activating the > > base, > > > >but I'm quite confused as to why one can work and one cannot. > > > > > >Thanks, > > > > > >JRH > > > > > >_______________________________________________ > > >App_rpt mailing list > > >App_rpt(a)lists.illiana.net > > >http://lists.illiana.net/mailman/listinfo/app_rpt > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt > > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt > > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt _______________________________________________ App_rpt mailing list App_rpt(a)lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt

2 1

Re: [App_rpt] App_rpt Digest, Vol 3, Issue 5
by f1shs＠free.fr 16 Mar '06

16 Mar '06

Selon app_rpt-request(a)lists.illiana.net: > Send App_rpt mailing list submissions to > app_rpt(a)lists.illiana.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.illiana.net/mailman/listinfo/app_rpt > or, via email, send a message with subject or body 'help' to > app_rpt-request(a)lists.illiana.net > > You can reach the person managing the list at > app_rpt-owner(a)lists.illiana.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt digest..." > > > Today's Topics: > > 1. Re: COP Functions (hwstar(a)rodgers.sdcoxmail.com) > 2. Re: Quad radio pci card (hwstar(a)rodgers.sdcoxmail.com) > 3. Re: COP Functions (James Harfield) > 4. Re: COP Functions (Steve Rodgers) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 15 Mar 2006 12:57:01 -0800 > From: <hwstar(a)rodgers.sdcoxmail.com> > Subject: Re: [App_rpt] COP Functions > To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > Message-ID: > <20060315205701.KEAI3326.dukecmmtao03.coxmail.com@dukecmmtao03> > Content-Type: text/plain; charset=ISO-8859-1 > > It probably would be a good idea to attach your rpt.conf file to the thread. > > Steve > WA6ZFT > > > > > From: "James Harfield" <harfija(a)auburn.edu> > > Date: 2006/03/15 Wed PM 12:29:28 PST > > To: <app_rpt(a)lists.illiana.net> > > Subject: Re: [App_rpt] COP Functions > > > > That's what I figure as well. I've tried Softphone, Cell phone, land > phone. All the default ilink and status functions work, along with cop,4 to > initiate the test tone. But cop,6 won't key the radio. > > > > >>> telesistant(a)hotmail.com 3/15/2006 2:21 PM >>> > > Well, if you have cop,6 defined as *88, and you are comming in with the P > > option, and you > > have phone_functions = phone_functions, then you definitely should be able > > to key the > > radio from the phone by dialing *88 (from the phone and only from the > > phone). > > > > Jim, WB6NIL > > > > > > >From: "James Harfield" <harfija(a)auburn.edu> > > >Reply-To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > > >To: <app_rpt(a)lists.illiana.net> > > >Subject: [App_rpt] COP Functions > > >Date: Wed, 15 Mar 2006 13:11:02 -0600 > > >MIME-Version: 1.0 > > >Received: from lists.illiana.net ([207.227.243.140]) by > > >bay0-mc12-f14.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.1830); Wed, > > >15 Mar 2006 11:12:02 -0800 > > >Received: (qmail 25119 invoked from network); 15 Mar 2006 19:12:00 -0000 > > >Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1) by 0 with SMTP; > 15 > > >Mar 2006 19:12:00 -0000 > > >Received: (qmail 25092 invoked from network); 15 Mar 2006 19:11:52 -0000 > > >Received: from d1.duc.auburn.edu (131.204.2.2)by 0 with SMTP; 15 Mar 2006 > > >19:11:52 -0000 > > >Received: from TMIA1.AUBURN.EDU (tmia1.auburn.edu [131.204.3.30])by > > >d1.duc.auburn.edu (8.13.4/8.13.4) with ESMTP id k2FJBjbE013830for > > ><app_rpt(a)lists.illiana.net>; Wed, 15 Mar 2006 13:11:49 -0600 (CST) > > >Received: from zTMIA1-MTA by TMIA1.AUBURN.EDUwith Novell_GroupWise; Wed, > 15 > > >Mar 2006 13:11:45 -0600 > > >X-Message-Info: 6sSXyD95QpVMWPCRYsLAxQFjIgPjv7anT7L4spyjmhA= > > >Return-Path: <harfija(a)auburn.edu> > > >Delivered-To: mailman-app_rpt(a)lists.illiana.net > > >X-Mailer: Novell GroupWise Internet Agent 7.0 X-BeenThere: > > >app_rpt(a)lists.illiana.net > > >X-Mailman-Version: 2.1.6 > > >Precedence: list > > >List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net> > > >List-Unsubscribe: > > > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request@lists.illiana.net?subject=unsubscribe> > > >List-Archive: <http://lists.illiana.net/pipermail/app_rpt> > > >List-Post: <mailto:app_rpt@lists.illiana.net> > > >List-Help: <mailto:app_rpt-request@lists.illiana.net?subject=help> > > >List-Subscribe: > > > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request@lists.illiana.net?subject=subscribe> > > >Errors-To: app_rpt-bounces(a)lists.illiana.net > > >X-OriginalArrivalTime: 15 Mar 2006 19:12:03.0471 (UTC) > > >FILETIME=[57DDA1F0:01C64864] > > > > > >I'm having a problem getting cop,6 to function correctly in PTT'ing the > > >radio. > > > > > >I have phone_functions = phone_functions defined in rpt.conf and within > the > > >phone_functions heading I have: > > >88 = cop,6 > > >defined with the other cop, ilink, and status functions. When connecting > > >to my base I use the |P option instead of |D for phone control. > > > > > >The problem I'm having is that cop,6 will not activate the base to > > >transmit. All the status commands, System Info, Time, Version, and the > > >test tone cop,4 command work fine. The radio keys up, the appropriate > > >information is sent, and the radio is unkeyed. But cop,6 will not key it. > > >What I can do is manually key the radio and then use *88 (for cop,6) to > > >talk and # when I want to end talking. I've tried to dig through the code > > >and look at the difference between cop,6 and cop,4 for activating the > base, > > >but I'm quite confused as to why one can work and one cannot. > > > > > >Thanks, > > > > > >JRH > > > > > >_______________________________________________ > > >App_rpt mailing list > > >App_rpt(a)lists.illiana.net > > >http://lists.illiana.net/mailman/listinfo/app_rpt > > > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > > > ------------------------------ > > Message: 2 I've build a setup as describted in the installation procedure, but nothing work. I've used the exemples_conf files as a startup setup of asterisk + app_rpt... Is there some command to test if the pci card is functionning ? > Date: Wed, 15 Mar 2006 12:57:47 -0800 > From: <hwstar(a)rodgers.sdcoxmail.com> > Subject: Re: [App_rpt] Quad radio pci card > To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > Message-ID: > <20060315205747.KFAD3326.dukecmmtao03.coxmail.com@dukecmmtao03> > Content-Type: text/plain; charset=ISO-8859-1 > > What do you need to test? > > Steve WA6ZFT > > > > > From: "f1shs" <f1shs(a)free.fr> > > Date: 2006/03/15 Wed AM 11:50:21 PST > > To: <app_rpt(a)lists.illiana.net> > > Subject: [App_rpt] Quad radio pci card > > > > Hi, > > > > I would like to know how simple testing my quad radio pci card. > > > > f1shs > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.1.385 / Virus Database: 268.2.4/282 - Release Date: 15/03/2006 > > > > > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > > > ------------------------------ > > Message: 3 > Date: Wed, 15 Mar 2006 16:18:39 -0600 > From: "James Harfield" <harfija(a)auburn.edu> > Subject: Re: [App_rpt] COP Functions > To: <app_rpt(a)lists.illiana.net> > Message-ID: <44183E5E020000D600010947(a)TMIA1.AUBURN.EDU> > Content-Type: text/plain; charset=US-ASCII > > As requested rpt.conf: > > [1999] ; Name of First Repeater > > rxchannel = Zap/1 ; Rx audio/signalling channel > ; Note: if you use a unified interface (tx/rx on one channel), only > ; specify the rxchannel and the txchannel will be assumed from the > rxchannel > functions=functions ; Repeater Function Table > ; > ; Added phone_functions=phone_functions > ; > phone_functions = phone_functions ;phone functions table > link_functions=link-functions ; Link Function Table > telemetry=telemetry ; Telemetry descriptions > wait_times=wait-times ; Wait times > context = radio ; dialing context for phone > callerid = "Your Repeater" <6198192562> ; callerid for phone calls > idrecording = /etc/asterisk/id ; id recording > accountcode=RADIO ; account code (optional) > hangtime=1000 ; squelch tail hang time (in ms) > (optional) > totime=90000 ; transmit time-out time (in ms) > (optional) > idtime=180000 ; id interval time (in ms) > (optional) > ; > ;Added duplex=2 > ; > ;duplex=2 > > ; The default values for hangtime, time-out time, and id interval time > are > ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms) > ; respectively > > politeid=30000 ; time in milliseconds before ID > timer > ; expires to try and ID in the > tail. > ; (optional, default is 30000). > idtalkover=|iid/r ; Talkover ID (optional) default > is none > unlinkedct=ct2 ; unlinked courtesy tone > (optional) default is none > > ; > ; Repeater function table for node 010 > ; > > [functions] > 1=ilink,1 ; Specific link disconnect > 2=ilink,2 ; Specific Link connect - > monitor only > 3=ilink,3 ; Specific Link connect - > transceive > 4=ilink,4 ; Enter command mode on a > specific link > 7=ilink,5 ; Link status > > 80=status,1 ; System info > 81=status,2 ; Time > 82=status,3 ; app_rpt.c Version > > 6=autopatchup ; Autopatch up > 0=autopatchdn ; Autopatch down > > ; > ;Added cop,6 in this context just to see if it would recognize cop,6 > ; > 88=cop,6 ; PTT Radio > 99=cop,4 ; Audio test tone > > > ; > ;Added phone_functions table for the phone_functions=phone_functions > ; > [phone_functions] > > 1=ilink,1 ; Specific link disconnect > 2=ilink,2 ; Specific Link connect - > monitor only > 3=ilink,3 ; Specific Link connect - > transceive > 4=ilink,4 ; Enter command mode on a > specific link > 7=ilink,5 ; Link status > > 80=status,1 ; System info > 81=status,2 ; Time > 82=status,3 ; app_rpt.c Version > > > ; > ;Added cop,1 - cop,6 for testing purposes. > ; > 84=cop,1 ;warm boot > 85=cop,2 ;system enable > 86=cop,3 ;system disable > 87=cop,5 ;debug mode > 88=cop,6 ;system PTT > > 6=autopatchup ; Autopatch up > 0=autopatchdn ; Autopatch down > > 99=cop,4 ; Audio test tone > > > ; > ; Link function table > ; > ; If this section is defined, then the remote user accessing our machine > in command mode > ; will only be able to do the functions defined in this section. If this > section is > ; omitted, then the link functions will be the same as the repeater > functions. > ; > > > [link-functions] > 1=ilink,1 ; Specific link disconnect > 2=ilink,2 ; Specific Link connect - > monitor only > 3=ilink,3 ; Specific Link connect - > transceive > 7=ilink,5 ; Link status > > > 80=status,1 ; System info > 81=status,2 ; Time > 82=status,3 ; app_rpt.c Version > > > 6=autopatchup ; Autopatch up > 0=autopatchdn ; Autopatch down > 84=cop,1 ;warm boot > 85=cop,2 ;system enable > 86=cop,3 ;system disable > 87=cop,5 ;debug mode > 88=cop,6 ;system PTT > > 99=cop,4 ; Audio test tone > > [telemetry] > > ; Telemetry entries can be shared across all repeaters, or defined for > each repeater. > ; Can be a tone sequence, morse string, or a file > ; > ; |t - Tone escape sequence > ; > ; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, > duration, amplitude) > ; Single frequencies are created by setting freq1 or freq2 to zero. > ; > ; |m - Morse escape sequence > ; > ; Sends Morse code at the telemetry amplitude and telemetry frequency as > defined in the > ; [morse] section. > ; > ; Follow with an alphanumeric string > ; > ; |i - Morse ID escape sequence > ; > ; Sends Morse code at the ID amplitude and ID frequency as defined in > the > ; [morse] section. > ; > ; Follow with an alphanumeric string > > > ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) > ct2=|t(660,880,150,2048) > ct3=|t(440,0,150,2048) > ct4=|t(550,0,150,2048) > ct5=|t(660,0,150,2048) > ct6=|t(880,0,150,2048) > ct7=|t(660,440,150,2048) > ct8=|t(700,1100,150,2048) > remotetx=|t(1633,0,75,2048)(0,0,75,0)(1209,0,75,2048); > remotemon=|t(1209,0,75,2048) > cmdmode=|t(900,903,200,2048) > functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) > > ; > ; Morse code parameters, these are common to all repeaters. > ; > > [morse] > > speed=20 ; Approximate speed in WPM > frequency=800 ; Morse Telemetry Frequency > amplitude=4096 ; Morse Telemetry Amplitude > idfrequency=1064 ; Morse ID Frequency > idamplitude=3072 ; Morse ID Amplitude > > ; > ; This section allows wait times for telemetry events to be adjusted > ; A section for wait times can be defined for every repeater > ; > > [wait-times] > > telemwait=1750 ; Time to wait before sending > most telemetry > idwait=500 ; Time to wait before starting > ID > unkeywait=1000 ; Time to wait after unkey > before sending CT's and link telemetry > calltermwait=1500 ; Time to wait before announcing > "call terminated" > > ; > ; This is where you define your nodes which cam be connected to. > ; > > [nodes] > 1999 = radio(a)127.0.0.1/1999 ; This must be changed to your IP > address > > We added cop,6 to the regular functions table and the link functions > table just to test and see if it was picking up only those functions > instead, since there was a comment that if link functions were enabled > then the remote user would only have access to them. > > Here is the extensions.conf for connecting to the radio: > > exten => 305,1,Rpt,1999|P > > ulaw is allowed in both IAX.conf and SIP.conf that we are using to dial > the radio. Does this need to be changed as well? Trying to add as much > info I can think of. > > Thanks, > > JRH > > > >>> hwstar(a)rodgers.sdcoxmail.com 03/15/06 2:57 PM >>> > It probably would be a good idea to attach your rpt.conf file to the > thread. > > Steve > WA6ZFT > > > > > From: "James Harfield" <harfija(a)auburn.edu> > > Date: 2006/03/15 Wed PM 12:29:28 PST > > To: <app_rpt(a)lists.illiana.net> > > Subject: Re: [App_rpt] COP Functions > > > > That's what I figure as well. I've tried Softphone, Cell phone, land > phone. All the default ilink and status functions work, along with > cop,4 to initiate the test tone. But cop,6 won't key the radio. > > > > >>> telesistant(a)hotmail.com 3/15/2006 2:21 PM >>> > > Well, if you have cop,6 defined as *88, and you are comming in with > the P > > option, and you > > have phone_functions = phone_functions, then you definitely should be > able > > to key the > > radio from the phone by dialing *88 (from the phone and only from the > > phone). > > > > Jim, WB6NIL > > > > > > >From: "James Harfield" <harfija(a)auburn.edu> > > >Reply-To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > > >To: <app_rpt(a)lists.illiana.net> > > >Subject: [App_rpt] COP Functions > > >Date: Wed, 15 Mar 2006 13:11:02 -0600 > > >MIME-Version: 1.0 > > >Received: from lists.illiana.net ([207.227.243.140]) by > > >bay0-mc12-f14.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.1830); > Wed, > > >15 Mar 2006 11:12:02 -0800 > > >Received: (qmail 25119 invoked from network); 15 Mar 2006 19:12:00 > -0000 > > >Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1) by 0 with > SMTP; 15 > > >Mar 2006 19:12:00 -0000 > > >Received: (qmail 25092 invoked from network); 15 Mar 2006 19:11:52 > -0000 > > >Received: from d1.duc.auburn.edu (131.204.2.2)by 0 with SMTP; 15 Mar > 2006 > > >19:11:52 -0000 > > >Received: from TMIA1.AUBURN.EDU (tmia1.auburn.edu [131.204.3.30])by > > >d1.duc.auburn.edu (8.13.4/8.13.4) with ESMTP id k2FJBjbE013830for > > ><app_rpt(a)lists.illiana.net>; Wed, 15 Mar 2006 13:11:49 -0600 (CST) > > >Received: from zTMIA1-MTA by TMIA1.AUBURN.EDUwith Novell_GroupWise; > Wed, 15 > > >Mar 2006 13:11:45 -0600 > > >X-Message-Info: 6sSXyD95QpVMWPCRYsLAxQFjIgPjv7anT7L4spyjmhA= > > >Return-Path: <harfija(a)auburn.edu> > > >Delivered-To: mailman-app_rpt(a)lists.illiana.net > > >X-Mailer: Novell GroupWise Internet Agent 7.0 X-BeenThere: > > >app_rpt(a)lists.illiana.net > > >X-Mailman-Version: 2.1.6 > > >Precedence: list > > >List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net> > > >List-Unsubscribe: > > > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request@lists.illiana.net?subject=unsubscribe> > > >List-Archive: <http://lists.illiana.net/pipermail/app_rpt> > > >List-Post: <mailto:app_rpt@lists.illiana.net> > > >List-Help: <mailto:app_rpt-request@lists.illiana.net?subject=help> > > >List-Subscribe: > > > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request@lists.illiana.net?subject=subscribe> > > >Errors-To: app_rpt-bounces(a)lists.illiana.net > > >X-OriginalArrivalTime: 15 Mar 2006 19:12:03.0471 (UTC) > > >FILETIME=[57DDA1F0:01C64864] > > > > > >I'm having a problem getting cop,6 to function correctly in PTT'ing > the > > >radio. > > > > > >I have phone_functions = phone_functions defined in rpt.conf and > within the > > >phone_functions heading I have: > > >88 = cop,6 > > >defined with the other cop, ilink, and status functions. When > connecting > > >to my base I use the |P option instead of |D for phone control. > > > > > >The problem I'm having is that cop,6 will not activate the base to > > >transmit. All the status commands, System Info, Time, Version, and > the > > >test tone cop,4 command work fine. The radio keys up, the > appropriate > > >information is sent, and the radio is unkeyed. But cop,6 will not > key it. > > >What I can do is manually key the radio and then use *88 (for cop,6) > to > > >talk and # when I want to end talking. I've tried to dig through the > code > > >and look at the difference between cop,6 and cop,4 for activating the > base, > > >but I'm quite confused as to why one can work and one cannot. > > > > > >Thanks, > > > > > >JRH > > > > > >_______________________________________________ > > >App_rpt mailing list > > >App_rpt(a)lists.illiana.net > > >http://lists.illiana.net/mailman/listinfo/app_rpt > > > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > ------------------------------ > > Message: 4 > Date: Wed, 15 Mar 2006 20:41:22 -0800 > From: Steve Rodgers <hwstar(a)rodgers.sdcoxmail.com> > Subject: Re: [App_rpt] COP Functions > To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > Message-ID: <200603152041.22786.hwstar(a)rodgers.sdcoxmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > James, > > I tried your config file on my system (had to change the node and the zap > channel, but everything else remained the same), and *88 keyed the > transmitter over the phone as it should be. Now I'm scratching my head.... > > The next thing to try: > > Issue "rpt debug level 1" from the real asterisk console ( asterisk > -vvvvvvc, > and not asterisk -r) and see if you can see the DTMF digits being processed > by app_rpt. > > You should see something like this: > > @@@@ Digits collected: 88, source: 0 > @@@@ action: cop, param = 6 > @@@@ table index i = 0 > > > BTW: cop.6 has no effect when dialed on a radio or link channel. Cop,6 is for > use on a phone dial-in only. I'd suggest removing these from your other > function tables. > > Steve, > WA6ZFT > > > > > On Wednesday 15 March 2006 14:18, James Harfield wrote: > > As requested rpt.conf: > > > > [1999] ; Name of First Repeater > > > > rxchannel = Zap/1 ; Rx audio/signalling channel > > ; Note: if you use a unified interface (tx/rx on one channel), only > > ; specify the rxchannel and the txchannel will be assumed from the > > rxchannel > > functions=functions ; Repeater Function Table > > ; > > ; Added phone_functions=phone_functions > > ; > > phone_functions = phone_functions ;phone functions table > > link_functions=link-functions ; Link Function Table > > telemetry=telemetry ; Telemetry descriptions > > wait_times=wait-times ; Wait times > > context = radio ; dialing context for phone > > callerid = "Your Repeater" <6198192562> ; callerid for phone calls > > idrecording = /etc/asterisk/id ; id recording > > accountcode=RADIO ; account code (optional) > > hangtime=1000 ; squelch tail hang time (in ms) > > (optional) > > totime=90000 ; transmit time-out time (in ms) > > (optional) > > idtime=180000 ; id interval time (in ms) > > (optional) > > ; > > ;Added duplex=2 > > ; > > ;duplex=2 > > > > ; The default values for hangtime, time-out time, and id interval time > > are > > ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms) > > ; respectively > > > > politeid=30000 ; time in milliseconds before ID > > timer > > ; expires to try and ID in the > > tail. > > ; (optional, default is 30000). > > idtalkover=|iid/r ; Talkover ID (optional) default > > is none > > unlinkedct=ct2 ; unlinked courtesy tone > > (optional) default is none > > > > ; > > ; Repeater function table for node 010 > > ; > > > > [functions] > > 1=ilink,1 ; Specific link disconnect > > 2=ilink,2 ; Specific Link connect - > > monitor only > > 3=ilink,3 ; Specific Link connect - > > transceive > > 4=ilink,4 ; Enter command mode on a > > specific link > > 7=ilink,5 ; Link status > > > > 80=status,1 ; System info > > 81=status,2 ; Time > > 82=status,3 ; app_rpt.c Version > > > > 6=autopatchup ; Autopatch up > > 0=autopatchdn ; Autopatch down > > > > ; > > ;Added cop,6 in this context just to see if it would recognize cop,6 > > ; > > 88=cop,6 ; PTT Radio > > 99=cop,4 ; Audio test tone > > > > > > ; > > ;Added phone_functions table for the phone_functions=phone_functions > > ; > > [phone_functions] > > > > 1=ilink,1 ; Specific link disconnect > > 2=ilink,2 ; Specific Link connect - > > monitor only > > 3=ilink,3 ; Specific Link connect - > > transceive > > 4=ilink,4 ; Enter command mode on a > > specific link > > 7=ilink,5 ; Link status > > > > 80=status,1 ; System info > > 81=status,2 ; Time > > 82=status,3 ; app_rpt.c Version > > > > > > ; > > ;Added cop,1 - cop,6 for testing purposes. > > ; > > 84=cop,1 ;warm boot > > 85=cop,2 ;system enable > > 86=cop,3 ;system disable > > 87=cop,5 ;debug mode > > 88=cop,6 ;system PTT > > > > 6=autopatchup ; Autopatch up > > 0=autopatchdn ; Autopatch down > > > > 99=cop,4 ; Audio test tone > > > > > > ; > > ; Link function table > > ; > > ; If this section is defined, then the remote user accessing our machine > > in command mode > > ; will only be able to do the functions defined in this section. If this > > section is > > ; omitted, then the link functions will be the same as the repeater > > functions. > > ; > > > > > > [link-functions] > > 1=ilink,1 ; Specific link disconnect > > 2=ilink,2 ; Specific Link connect - > > monitor only > > 3=ilink,3 ; Specific Link connect - > > transceive > > 7=ilink,5 ; Link status > > > > > > 80=status,1 ; System info > > 81=status,2 ; Time > > 82=status,3 ; app_rpt.c Version > > > > > > 6=autopatchup ; Autopatch up > > 0=autopatchdn ; Autopatch down > > 84=cop,1 ;warm boot > > 85=cop,2 ;system enable > > 86=cop,3 ;system disable > > 87=cop,5 ;debug mode > > 88=cop,6 ;system PTT > > > > 99=cop,4 ; Audio test tone > > > > [telemetry] > > > > ; Telemetry entries can be shared across all repeaters, or defined for > > each repeater. > > ; Can be a tone sequence, morse string, or a file > > ; > > ; |t - Tone escape sequence > > ; > > ; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, > > duration, amplitude) > > ; Single frequencies are created by setting freq1 or freq2 to zero. > > ; > > ; |m - Morse escape sequence > > ; > > ; Sends Morse code at the telemetry amplitude and telemetry frequency as > > defined in the > > ; [morse] section. > > ; > > ; Follow with an alphanumeric string > > ; > > ; |i - Morse ID escape sequence > > ; > > ; Sends Morse code at the ID amplitude and ID frequency as defined in > > the > > ; [morse] section. > > ; > > ; Follow with an alphanumeric string > > > > > > ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) > > ct2=|t(660,880,150,2048) > > ct3=|t(440,0,150,2048) > > ct4=|t(550,0,150,2048) > > ct5=|t(660,0,150,2048) > > ct6=|t(880,0,150,2048) > > ct7=|t(660,440,150,2048) > > ct8=|t(700,1100,150,2048) > > remotetx=|t(1633,0,75,2048)(0,0,75,0)(1209,0,75,2048); > > remotemon=|t(1209,0,75,2048) > > cmdmode=|t(900,903,200,2048) > > functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) > > > > ; > > ; Morse code parameters, these are common to all repeaters. > > ; > > > > [morse] > > > > speed=20 ; Approximate speed in WPM > > frequency=800 ; Morse Telemetry Frequency > > amplitude=4096 ; Morse Telemetry Amplitude > > idfrequency=1064 ; Morse ID Frequency > > idamplitude=3072 ; Morse ID Amplitude > > > > ; > > ; This section allows wait times for telemetry events to be adjusted > > ; A section for wait times can be defined for every repeater > > ; > > > > [wait-times] > > > > telemwait=1750 ; Time to wait before sending > > most telemetry > > idwait=500 ; Time to wait before starting > > ID > > unkeywait=1000 ; Time to wait after unkey > > before sending CT's and link telemetry > > calltermwait=1500 ; Time to wait before announcing > > "call terminated" > > > > ; > > ; This is where you define your nodes which cam be connected to. > > ; > > > > [nodes] > > 1999 = radio(a)127.0.0.1/1999 ; This must be changed to your IP > > address > > > > We added cop,6 to the regular functions table and the link functions > > table just to test and see if it was picking up only those functions > > instead, since there was a comment that if link functions were enabled > > then the remote user would only have access to them. > > > > Here is the extensions.conf for connecting to the radio: > > > > exten => 305,1,Rpt,1999|P > > > > ulaw is allowed in both IAX.conf and SIP.conf that we are using to dial > > the radio. Does this need to be changed as well? Trying to add as much > > info I can think of. > > > > Thanks, > > > > JRH > > > > >>> hwstar(a)rodgers.sdcoxmail.com 03/15/06 2:57 PM >>> > > > > It probably would be a good idea to attach your rpt.conf file to the > > thread. > > > > Steve > > WA6ZFT > > > > > From: "James Harfield" <harfija(a)auburn.edu> > > > Date: 2006/03/15 Wed PM 12:29:28 PST > > > To: <app_rpt(a)lists.illiana.net> > > > Subject: Re: [App_rpt] COP Functions > > > > > > That's what I figure as well. I've tried Softphone, Cell phone, land > > > > phone. All the default ilink and status functions work, along with > > cop,4 to initiate the test tone. But cop,6 won't key the radio. > > > > > >>> telesistant(a)hotmail.com 3/15/2006 2:21 PM >>> > > > > > > Well, if you have cop,6 defined as *88, and you are comming in with > > > > the P > > > > > option, and you > > > have phone_functions = phone_functions, then you definitely should be > > > > able > > > > > to key the > > > radio from the phone by dialing *88 (from the phone and only from the > > > phone). > > > > > > Jim, WB6NIL > > > > > > >From: "James Harfield" <harfija(a)auburn.edu> > > > >Reply-To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > > > >To: <app_rpt(a)lists.illiana.net> > > > >Subject: [App_rpt] COP Functions > > > >Date: Wed, 15 Mar 2006 13:11:02 -0600 > > > >MIME-Version: 1.0 > > > >Received: from lists.illiana.net ([207.227.243.140]) by > > > >bay0-mc12-f14.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.1830); > > > > Wed, > > > > > >15 Mar 2006 11:12:02 -0800 > > > >Received: (qmail 25119 invoked from network); 15 Mar 2006 19:12:00 > > > > -0000 > > > > > >Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1) by 0 with > > > > SMTP; 15 > > > > > >Mar 2006 19:12:00 -0000 > > > >Received: (qmail 25092 invoked from network); 15 Mar 2006 19:11:52 > > > > -0000 > > > > > >Received: from d1.duc.auburn.edu (131.204.2.2)by 0 with SMTP; 15 Mar > > > > 2006 > > > > > >19:11:52 -0000 > > > >Received: from TMIA1.AUBURN.EDU (tmia1.auburn.edu [131.204.3.30])by > > > >d1.duc.auburn.edu (8.13.4/8.13.4) with ESMTP id k2FJBjbE013830for > > > ><app_rpt(a)lists.illiana.net>; Wed, 15 Mar 2006 13:11:49 -0600 (CST) > > > >Received: from zTMIA1-MTA by TMIA1.AUBURN.EDUwith Novell_GroupWise; > > > > Wed, 15 > > > > > >Mar 2006 13:11:45 -0600 > > > >X-Message-Info: 6sSXyD95QpVMWPCRYsLAxQFjIgPjv7anT7L4spyjmhA= > > > >Return-Path: <harfija(a)auburn.edu> > > > >Delivered-To: mailman-app_rpt(a)lists.illiana.net > > > >X-Mailer: Novell GroupWise Internet Agent 7.0 X-BeenThere: > > > >app_rpt(a)lists.illiana.net > > > >X-Mailman-Version: 2.1.6 > > > >Precedence: list > > > >List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net> > > > >List-Unsubscribe: > > > > > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-reques > > >t(a)lists.illiana.net?subject=unsubscribe> > > > > > > >List-Archive: <http://lists.illiana.net/pipermail/app_rpt> > > > >List-Post: <mailto:app_rpt@lists.illiana.net> > > > >List-Help: <mailto:app_rpt-request@lists.illiana.net?subject=help> > > > >List-Subscribe: > > > > > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-reques > > >t(a)lists.illiana.net?subject=subscribe> > > > > > > >Errors-To: app_rpt-bounces(a)lists.illiana.net > > > >X-OriginalArrivalTime: 15 Mar 2006 19:12:03.0471 (UTC) > > > >FILETIME=[57DDA1F0:01C64864] > > > > > > > >I'm having a problem getting cop,6 to function correctly in PTT'ing > > > > the > > > > > >radio. > > > > > > > >I have phone_functions = phone_functions defined in rpt.conf and > > > > within the > > > > > >phone_functions heading I have: > > > >88 = cop,6 > > > >defined with the other cop, ilink, and status functions. When > > > > connecting > > > > > >to my base I use the |P option instead of |D for phone control. > > > > > > > >The problem I'm having is that cop,6 will not activate the base to > > > >transmit. All the status commands, System Info, Time, Version, and > > > > the > > > > > >test tone cop,4 command work fine. The radio keys up, the > > > > appropriate > > > > > >information is sent, and the radio is unkeyed. But cop,6 will not > > > > key it. > > > > > >What I can do is manually key the radio and then use *88 (for cop,6) > > > > to > > > > > >talk and # when I want to end talking. I've tried to dig through the > > > > code > > > > > >and look at the difference between cop,6 and cop,4 for activating the > > > > base, > > > > > >but I'm quite confused as to why one can work and one cannot. > > > > > > > >Thanks, > > > > > > > >JRH > > > > > > > >_______________________________________________ > > > >App_rpt mailing list > > > >App_rpt(a)lists.illiana.net > > > >http://lists.illiana.net/mailman/listinfo/app_rpt > > > > > > _______________________________________________ > > > App_rpt mailing list > > > App_rpt(a)lists.illiana.net > > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > > > _______________________________________________ > > > App_rpt mailing list > > > App_rpt(a)lists.illiana.net > > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > > _______________________________________________ > > App_rpt mailing list > > App_rpt(a)lists.illiana.net > > http://lists.illiana.net/mailman/listinfo/app_rpt > > > ------------------------------ > > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt > > > End of App_rpt Digest, Vol 3, Issue 5 > ************************************* >

1 0

Re: [App_rpt] COP Functions
by James Harfield 16 Mar '06

16 Mar '06

As requested rpt.conf: [1999] ; Name of First Repeater rxchannel = Zap/1 ; Rx audio/signalling channel ; Note: if you use a unified interface (tx/rx on one channel), only ; specify the rxchannel and the txchannel will be assumed from the rxchannel functions=functions ; Repeater Function Table ; ; Added phone_functions=phone_functions ; phone_functions = phone_functions ;phone functions table link_functions=link-functions ; Link Function Table telemetry=telemetry ; Telemetry descriptions wait_times=wait-times ; Wait times context = radio ; dialing context for phone callerid = "Your Repeater" <6198192562> ; callerid for phone calls idrecording = /etc/asterisk/id ; id recording accountcode=RADIO ; account code (optional) hangtime=1000 ; squelch tail hang time (in ms) (optional) totime=90000 ; transmit time-out time (in ms) (optional) idtime=180000 ; id interval time (in ms) (optional) ; ;Added duplex=2 ; ;duplex=2 ; The default values for hangtime, time-out time, and id interval time are ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms) ; respectively politeid=30000 ; time in milliseconds before ID timer ; expires to try and ID in the tail. ; (optional, default is 30000). idtalkover=|iid/r ; Talkover ID (optional) default is none unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none ; ; Repeater function table for node 010 ; [functions] 1=ilink,1 ; Specific link disconnect 2=ilink,2 ; Specific Link connect - monitor only 3=ilink,3 ; Specific Link connect - transceive 4=ilink,4 ; Enter command mode on a specific link 7=ilink,5 ; Link status 80=status,1 ; System info 81=status,2 ; Time 82=status,3 ; app_rpt.c Version 6=autopatchup ; Autopatch up 0=autopatchdn ; Autopatch down ; ;Added cop,6 in this context just to see if it would recognize cop,6 ; 88=cop,6 ; PTT Radio 99=cop,4 ; Audio test tone ; ;Added phone_functions table for the phone_functions=phone_functions ; [phone_functions] 1=ilink,1 ; Specific link disconnect 2=ilink,2 ; Specific Link connect - monitor only 3=ilink,3 ; Specific Link connect - transceive 4=ilink,4 ; Enter command mode on a specific link 7=ilink,5 ; Link status 80=status,1 ; System info 81=status,2 ; Time 82=status,3 ; app_rpt.c Version ; ;Added cop,1 - cop,6 for testing purposes. ; 84=cop,1 ;warm boot 85=cop,2 ;system enable 86=cop,3 ;system disable 87=cop,5 ;debug mode 88=cop,6 ;system PTT 6=autopatchup ; Autopatch up 0=autopatchdn ; Autopatch down 99=cop,4 ; Audio test tone ; ; Link function table ; ; If this section is defined, then the remote user accessing our machine in command mode ; will only be able to do the functions defined in this section. If this section is ; omitted, then the link functions will be the same as the repeater functions. ; [link-functions] 1=ilink,1 ; Specific link disconnect 2=ilink,2 ; Specific Link connect - monitor only 3=ilink,3 ; Specific Link connect - transceive 7=ilink,5 ; Link status 80=status,1 ; System info 81=status,2 ; Time 82=status,3 ; app_rpt.c Version 6=autopatchup ; Autopatch up 0=autopatchdn ; Autopatch down 84=cop,1 ;warm boot 85=cop,2 ;system enable 86=cop,3 ;system disable 87=cop,5 ;debug mode 88=cop,6 ;system PTT 99=cop,4 ; Audio test tone [telemetry] ; Telemetry entries can be shared across all repeaters, or defined for each repeater. ; Can be a tone sequence, morse string, or a file ; ; |t - Tone escape sequence ; ; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, duration, amplitude) ; Single frequencies are created by setting freq1 or freq2 to zero. ; ; |m - Morse escape sequence ; ; Sends Morse code at the telemetry amplitude and telemetry frequency as defined in the ; [morse] section. ; ; Follow with an alphanumeric string ; ; |i - Morse ID escape sequence ; ; Sends Morse code at the ID amplitude and ID frequency as defined in the ; [morse] section. ; ; Follow with an alphanumeric string ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ct2=|t(660,880,150,2048) ct3=|t(440,0,150,2048) ct4=|t(550,0,150,2048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ct8=|t(700,1100,150,2048) remotetx=|t(1633,0,75,2048)(0,0,75,0)(1209,0,75,2048); remotemon=|t(1209,0,75,2048) cmdmode=|t(900,903,200,2048) functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) ; ; Morse code parameters, these are common to all repeaters. ; [morse] speed=20 ; Approximate speed in WPM frequency=800 ; Morse Telemetry Frequency amplitude=4096 ; Morse Telemetry Amplitude idfrequency=1064 ; Morse ID Frequency idamplitude=3072 ; Morse ID Amplitude ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times] telemwait=1750 ; Time to wait before sending most telemetry idwait=500 ; Time to wait before starting ID unkeywait=1000 ; Time to wait after unkey before sending CT's and link telemetry calltermwait=1500 ; Time to wait before announcing "call terminated" ; ; This is where you define your nodes which cam be connected to. ; [nodes] 1999 = radio(a)127.0.0.1/1999 ; This must be changed to your IP address We added cop,6 to the regular functions table and the link functions table just to test and see if it was picking up only those functions instead, since there was a comment that if link functions were enabled then the remote user would only have access to them. Here is the extensions.conf for connecting to the radio: exten => 305,1,Rpt,1999|P ulaw is allowed in both IAX.conf and SIP.conf that we are using to dial the radio. Does this need to be changed as well? Trying to add as much info I can think of. Thanks, JRH >>> hwstar(a)rodgers.sdcoxmail.com 03/15/06 2:57 PM >>> It probably would be a good idea to attach your rpt.conf file to the thread. Steve WA6ZFT > > From: "James Harfield" <harfija(a)auburn.edu> > Date: 2006/03/15 Wed PM 12:29:28 PST > To: <app_rpt(a)lists.illiana.net> > Subject: Re: [App_rpt] COP Functions > > That's what I figure as well. I've tried Softphone, Cell phone, land phone. All the default ilink and status functions work, along with cop,4 to initiate the test tone. But cop,6 won't key the radio. > > >>> telesistant(a)hotmail.com 3/15/2006 2:21 PM >>> > Well, if you have cop,6 defined as *88, and you are comming in with the P > option, and you > have phone_functions = phone_functions, then you definitely should be able > to key the > radio from the phone by dialing *88 (from the phone and only from the > phone). > > Jim, WB6NIL > > > >From: "James Harfield" <harfija(a)auburn.edu> > >Reply-To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > >To: <app_rpt(a)lists.illiana.net> > >Subject: [App_rpt] COP Functions > >Date: Wed, 15 Mar 2006 13:11:02 -0600 > >MIME-Version: 1.0 > >Received: from lists.illiana.net ([207.227.243.140]) by > >bay0-mc12-f14.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.1830); Wed, > >15 Mar 2006 11:12:02 -0800 > >Received: (qmail 25119 invoked from network); 15 Mar 2006 19:12:00 -0000 > >Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1) by 0 with SMTP; 15 > >Mar 2006 19:12:00 -0000 > >Received: (qmail 25092 invoked from network); 15 Mar 2006 19:11:52 -0000 > >Received: from d1.duc.auburn.edu (131.204.2.2)by 0 with SMTP; 15 Mar 2006 > >19:11:52 -0000 > >Received: from TMIA1.AUBURN.EDU (tmia1.auburn.edu [131.204.3.30])by > >d1.duc.auburn.edu (8.13.4/8.13.4) with ESMTP id k2FJBjbE013830for > ><app_rpt(a)lists.illiana.net>; Wed, 15 Mar 2006 13:11:49 -0600 (CST) > >Received: from zTMIA1-MTA by TMIA1.AUBURN.EDUwith Novell_GroupWise; Wed, 15 > >Mar 2006 13:11:45 -0600 > >X-Message-Info: 6sSXyD95QpVMWPCRYsLAxQFjIgPjv7anT7L4spyjmhA= > >Return-Path: <harfija(a)auburn.edu> > >Delivered-To: mailman-app_rpt(a)lists.illiana.net > >X-Mailer: Novell GroupWise Internet Agent 7.0 X-BeenThere: > >app_rpt(a)lists.illiana.net > >X-Mailman-Version: 2.1.6 > >Precedence: list > >List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net> > >List-Unsubscribe: > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request@lists.illiana.net?subject=unsubscribe> > >List-Archive: <http://lists.illiana.net/pipermail/app_rpt> > >List-Post: <mailto:app_rpt@lists.illiana.net> > >List-Help: <mailto:app_rpt-request@lists.illiana.net?subject=help> > >List-Subscribe: > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request@lists.illiana.net?subject=subscribe> > >Errors-To: app_rpt-bounces(a)lists.illiana.net > >X-OriginalArrivalTime: 15 Mar 2006 19:12:03.0471 (UTC) > >FILETIME=[57DDA1F0:01C64864] > > > >I'm having a problem getting cop,6 to function correctly in PTT'ing the > >radio. > > > >I have phone_functions = phone_functions defined in rpt.conf and within the > >phone_functions heading I have: > >88 = cop,6 > >defined with the other cop, ilink, and status functions. When connecting > >to my base I use the |P option instead of |D for phone control. > > > >The problem I'm having is that cop,6 will not activate the base to > >transmit. All the status commands, System Info, Time, Version, and the > >test tone cop,4 command work fine. The radio keys up, the appropriate > >information is sent, and the radio is unkeyed. But cop,6 will not key it. > >What I can do is manually key the radio and then use *88 (for cop,6) to > >talk and # when I want to end talking. I've tried to dig through the code > >and look at the difference between cop,6 and cop,4 for activating the base, > >but I'm quite confused as to why one can work and one cannot. > > > >Thanks, > > > >JRH > > > >_______________________________________________ > >App_rpt mailing list > >App_rpt(a)lists.illiana.net > >http://lists.illiana.net/mailman/listinfo/app_rpt > > > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt > > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt > _______________________________________________ App_rpt mailing list App_rpt(a)lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt

2 1

Re: [App_rpt] Quad radio pci card
by hwstar＠rodgers.sdcoxmail.com 15 Mar '06

15 Mar '06

What do you need to test? Steve WA6ZFT > > From: "f1shs" <f1shs(a)free.fr> > Date: 2006/03/15 Wed AM 11:50:21 PST > To: <app_rpt(a)lists.illiana.net> > Subject: [App_rpt] Quad radio pci card > > Hi, > > I would like to know how simple testing my quad radio pci card. > > f1shs > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.385 / Virus Database: 268.2.4/282 - Release Date: 15/03/2006 > > > > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt >

1 0

Re: [App_rpt] COP Functions
by hwstar＠rodgers.sdcoxmail.com 15 Mar '06

15 Mar '06

It probably would be a good idea to attach your rpt.conf file to the thread. Steve WA6ZFT > > From: "James Harfield" <harfija(a)auburn.edu> > Date: 2006/03/15 Wed PM 12:29:28 PST > To: <app_rpt(a)lists.illiana.net> > Subject: Re: [App_rpt] COP Functions > > That's what I figure as well. I've tried Softphone, Cell phone, land phone. All the default ilink and status functions work, along with cop,4 to initiate the test tone. But cop,6 won't key the radio. > > >>> telesistant(a)hotmail.com 3/15/2006 2:21 PM >>> > Well, if you have cop,6 defined as *88, and you are comming in with the P > option, and you > have phone_functions = phone_functions, then you definitely should be able > to key the > radio from the phone by dialing *88 (from the phone and only from the > phone). > > Jim, WB6NIL > > > >From: "James Harfield" <harfija(a)auburn.edu> > >Reply-To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > >To: <app_rpt(a)lists.illiana.net> > >Subject: [App_rpt] COP Functions > >Date: Wed, 15 Mar 2006 13:11:02 -0600 > >MIME-Version: 1.0 > >Received: from lists.illiana.net ([207.227.243.140]) by > >bay0-mc12-f14.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.1830); Wed, > >15 Mar 2006 11:12:02 -0800 > >Received: (qmail 25119 invoked from network); 15 Mar 2006 19:12:00 -0000 > >Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1) by 0 with SMTP; 15 > >Mar 2006 19:12:00 -0000 > >Received: (qmail 25092 invoked from network); 15 Mar 2006 19:11:52 -0000 > >Received: from d1.duc.auburn.edu (131.204.2.2)by 0 with SMTP; 15 Mar 2006 > >19:11:52 -0000 > >Received: from TMIA1.AUBURN.EDU (tmia1.auburn.edu [131.204.3.30])by > >d1.duc.auburn.edu (8.13.4/8.13.4) with ESMTP id k2FJBjbE013830for > ><app_rpt(a)lists.illiana.net>; Wed, 15 Mar 2006 13:11:49 -0600 (CST) > >Received: from zTMIA1-MTA by TMIA1.AUBURN.EDUwith Novell_GroupWise; Wed, 15 > >Mar 2006 13:11:45 -0600 > >X-Message-Info: 6sSXyD95QpVMWPCRYsLAxQFjIgPjv7anT7L4spyjmhA= > >Return-Path: <harfija(a)auburn.edu> > >Delivered-To: mailman-app_rpt(a)lists.illiana.net > >X-Mailer: Novell GroupWise Internet Agent 7.0 X-BeenThere: > >app_rpt(a)lists.illiana.net > >X-Mailman-Version: 2.1.6 > >Precedence: list > >List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net> > >List-Unsubscribe: > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request@lists.illiana.net?subject=unsubscribe> > >List-Archive: <http://lists.illiana.net/pipermail/app_rpt> > >List-Post: <mailto:app_rpt@lists.illiana.net> > >List-Help: <mailto:app_rpt-request@lists.illiana.net?subject=help> > >List-Subscribe: > ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request@lists.illiana.net?subject=subscribe> > >Errors-To: app_rpt-bounces(a)lists.illiana.net > >X-OriginalArrivalTime: 15 Mar 2006 19:12:03.0471 (UTC) > >FILETIME=[57DDA1F0:01C64864] > > > >I'm having a problem getting cop,6 to function correctly in PTT'ing the > >radio. > > > >I have phone_functions = phone_functions defined in rpt.conf and within the > >phone_functions heading I have: > >88 = cop,6 > >defined with the other cop, ilink, and status functions. When connecting > >to my base I use the |P option instead of |D for phone control. > > > >The problem I'm having is that cop,6 will not activate the base to > >transmit. All the status commands, System Info, Time, Version, and the > >test tone cop,4 command work fine. The radio keys up, the appropriate > >information is sent, and the radio is unkeyed. But cop,6 will not key it. > >What I can do is manually key the radio and then use *88 (for cop,6) to > >talk and # when I want to end talking. I've tried to dig through the code > >and look at the difference between cop,6 and cop,4 for activating the base, > >but I'm quite confused as to why one can work and one cannot. > > > >Thanks, > > > >JRH > > > >_______________________________________________ > >App_rpt mailing list > >App_rpt(a)lists.illiana.net > >http://lists.illiana.net/mailman/listinfo/app_rpt > > > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt > > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt >

1 0

[App_rpt] COP Functions
by James Harfield 15 Mar '06

15 Mar '06

I'm having a problem getting cop,6 to function correctly in PTT'ing the radio. I have phone_functions = phone_functions defined in rpt.conf and within the phone_functions heading I have: 88 = cop,6 defined with the other cop, ilink, and status functions. When connecting to my base I use the |P option instead of |D for phone control. The problem I'm having is that cop,6 will not activate the base to transmit. All the status commands, System Info, Time, Version, and the test tone cop,4 command work fine. The radio keys up, the appropriate information is sent, and the radio is unkeyed. But cop,6 will not key it. What I can do is manually key the radio and then use *88 (for cop,6) to talk and # when I want to end talking. I've tried to dig through the code and look at the difference between cop,6 and cop,4 for activating the base, but I'm quite confused as to why one can work and one cannot. Thanks, JRH

2 2

[App_rpt] Quad radio pci card
by f1shs 15 Mar '06

15 Mar '06

Hi, I would like to know how simple testing my quad radio pci card. f1shs -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.2.4/282 - Release Date: 15/03/2006

1 0

[App_rpt] Version 0.44 app_rpt available
by Steve Rodgers 09 Mar '06

09 Mar '06

There's a new version of app_rpt.c available on the zapatatelephony site. Version 0.44 Adds 2 CLI status commands-- rpt stats node and rpt lstats node The first command will list the state of the node and the second command will list the state of the links connected to the node. There is also a fix for the brief drop of the transmitter when a tail message is about to be played. Some systems did this while others were just fine. The new version of app_rpt is available here: http://www.zapatatelephony.org/app_rpt-0.44.c Steve, WA6ZFT

3 4