March 2008 - App_rpt-users - lists.keekles.org

[App_rpt] Just Placed an order with DMK Engineering
by Nevada Amateur Radio Repeaters, Inc. 25 Mar '08

25 Mar '08

Just Placed an order with DMK Engineering. Where are instructions found?

5 8

[App_rpt] SVN Checkout of New app_rpt, howto?
by Steve Totaro 18 Mar '08

18 Mar '08

Hello, I am trying to checkout the newest trunk of app_rpt (I think this is the only source with the URI drivers?) Can anyone tell me what I am doing wrong? [root@localhost src]# svn co https://www.xelatec.com/viewvc/app_rpt/asterisk/trunk app_rpt svn: PROPFIND request failed on '/viewvc/app_rpt/asterisk/trunk' svn: PROPFIND of '/viewvc/app_rpt/asterisk/trunk': 302 Found (https://www.xelatec.com) Thanks, Steve Totaro

2 2

[App_rpt] Test message
by Stephen Rodgers 14 Mar '08

14 Mar '08

Test message

1 0

[App_rpt] Test message
by Stephen Rodgers 14 Mar '08

14 Mar '08

This is a test

1 0

[App_rpt] Thanks and Questions
by marshall＠cal-net.org 13 Mar '08

13 Mar '08

Greetings, First off, I wanted to thank everyone for such a great system that you guys have put together. It just blows me away how much work has been put into this project. From the install scripts for the OS and software to the tuning software for levels and signals on the USB FOB. I was amazed at how good the tuning scripts worked when I went through the radio tuning setup. All I can say is "Unbelievable!" <GRIN> I have a few questions, the first regarding the usbradio.conf file and one of the configuration settings in that file. I see this explanation in the usbradio.conf.sample file. eeprom=1 ; 1 = Indicates that an EEPROM internal to the radio I see this setting in my usbradio.conf file. eeprom=0 ; unless you have a cable w/eeprom Is this talking about the URI FOB with the eeprom in it? Just got done with my install tonight and am using the URI FOB, should I change this setting from a 0 to a 1? Or is this setting for something else? Also, when you get done doing the radio tuning procedure as documented by Steve Henke in "The Asterisk with app_rpt Server Installation Process" (page 7), and you save the configuration by using the CLI command "radio tune save" , where does that file get saved to? The eeprom on the URI FOB? Or somewhere else? Just wondering. Thanks, for your help. Node 2067 is online and working great with the URI FOB and a Motorola M120 radio. I am having fun and learning. Marshall - ke6pcv

1 0

[App_rpt] Thanks and Questions
by Marshall Oldham 13 Mar '08

13 Mar '08

Greetings, First off, I wanted to thank everyone for such a great system that you guys have put together. It just blows me away how much work has been put into this project. From the install scripts for the OS and software to the tuning software for levels and signals on the USB FOB. I was amazed at how good the tuning scripts worked when I went through the radio tuning setup. All I can say is "Unbelievable!" <GRIN> I have a few questions, the first regarding the usbradio.conf file and one of the configuration settings in that file. I see this explanation in the usbradio.conf.sample file. eeprom=1 ; 1 = Indicates that an EEPROM internal to the radio I see this setting in my usbradio.conf file. eeprom=0 ; unless you have a cable w/eeprom Is this talking about the URI FOB with the eeprom in it? Just got done with my install tonight and am using the URI FOB, should I change this setting from a 0 to a 1? Or is this setting for something else? Also, when you get done doing the radio tuning procedure as documented by Steve Henke in "The Asterisk with app_rpt Server Installation Process" (page 7), and you save the configuration by using the CLI command "radio tune save" , where does that file get saved to? The eeprom on the URI FOB? Or somewhere else? Just wondering. Thanks, for your help. Node 2067 is online and working great with the URI FOB and a Motorola M120 radio. I am having fun and learning. Marshall - ke6pcv

1 0

[App_rpt] DTMF processing?
by James Nessen 11 Mar '08

11 Mar '08

I have just setup another node and I am having an issue with DTMF, the node is decoding my dtmf just fine, however it's not actually going through and processing anything. I can control it via rpt fun <node> <cmd> and that works fine, but something is missing.. The configs were copied over from a good known working node (and node numbers changed).. What did I miss? Thanks. Jim / K6JWN

2 3

[App_rpt] First contact
by Guillaume Devoyon 10 Mar '08

10 Mar '08

Hello, >From a long time I wanted to set up a apt_rpt link to test. I have set up a linux suse open on an vmware (juste for test before migrating to a real pc... it will allow me to start from snapshot if needed...). I want to use a usb phone dongle I found on french market (based on cm108, the same has on the howto). No problems for compilations, the howto is perfect... (and I'm linux system engineer.. ;-) ) I have two questions for beginning : 1) I want to use apt_rpt just for hamradio needs... Is there a documentation explaining apt_rpt.conf file ? Or does it just exist the sample file for starting ? 2) I want to use pocket uhf radio gear for my test with just ptt, audio in/out available... is it possible ? and the cor ? I saw that there was an squelch parameters in .c file.. how does it work...? I had a look on archives of the mailing list but i found nothing really sexy... If there is documentation, just give me link, i'll read it first before ... ;-) Best regards Guillaume Devoyon F8ARR -- Ce mail est envoyé depuis un compte gmail temporaire. Pour être lu rapidement, veuillez envoyer un mail à mon adresse permanente : guillaume.devoyon(a)f8arr.org.

3 3

[App_rpt] Dialogic card and ham radio
by Guillaume Devoyon 10 Mar '08

10 Mar '08

Hello, I have found a card D/120JCT-LS from dialogic. Is someone use such card for ham radio purpose ..?? Regards

1 0

[App_rpt] allstarlink nodes update
by James Nessen 10 Mar '08

10 Mar '08

I'm not sure if this is the correct list to report things like this, but i am having issues updating the allstar node listing: root@k6jwn-app-rpt:/var/lib/asterisk# wget http:// nodes1.allstarlink.org/cgi-bin/nodes.pl --23:36:57-- http://nodes1.allstarlink.org/cgi-bin/nodes.pl => `nodes.pl' Resolving nodes1.allstarlink.org... 209.134.25.160 Connecting to nodes1.allstarlink.org|209.134.25.160|:80... connected. HTTP request sent, awaiting response... 403 23:36:58 ERROR 403: (no description). root@k6jwn-app-rpt:/var/lib/asterisk# wget http:// nodes2.allstarlink.org/cgi-bin/nodes.pl --23:37:03-- http://nodes2.allstarlink.org/cgi-bin/nodes.pl => `nodes.pl' Resolving nodes2.allstarlink.org... 209.134.25.160 Connecting to nodes2.allstarlink.org|209.134.25.160|:80... connected. HTTP request sent, awaiting response... 404 Not Found 23:37:03 ERROR 404: Not Found. root@k6jwn-app-rpt:/var/lib/asterisk# wget http:// nodes3.allstarlink.org/cgi-bin/nodes.pl --23:37:08-- http://nodes3.allstarlink.org/cgi-bin/nodes.pl => `nodes.pl' Resolving nodes3.allstarlink.org... 209.134.25.160 Connecting to nodes3.allstarlink.org|209.134.25.160|:80... connected. HTTP request sent, awaiting response... 404 Not Found 23:37:09 ERROR 404: Not Found. root@k6jwn-app-rpt:/var/lib/asterisk# wget http:// nodes4.allstarlink.org/cgi-bin/nodes.pl --23:37:14-- http://nodes4.allstarlink.org/cgi-bin/nodes.pl => `nodes.pl' Resolving nodes4.allstarlink.org... 66.96.212.210 Connecting to nodes4.allstarlink.org|66.96.212.210|:80... connected. HTTP request sent, awaiting response... 500 Internal Server Error 23:37:14 ERROR 500: Internal Server Error.

1 0