March 2010 - App_rpt-users - lists.keekles.org

iax provisioning
by Ramesh Dhami (VA3UV) 08 Mar '10

08 Mar '10

Hi Guys; One of the nodes that I administer is giving the following error, when trying to do an iax2 reload: iax2 reload == Parsing '/etc/asterisk/iax.conf': Found [Mar 7 10:19:44] NOTICE[2839]: chan_iax2.c:10022 set_config: Ignoring bindaddr on reload == Loaded firmware 'iaxy.bin' [Mar 7 10:19:44] NOTICE[2839]: iax2-provision.c:518 iax_provision_reload: No IAX provisioning configuration found, IAX provisioning disabled. Consequently, no IAX connections (inbound or outbound) are being accepted. Any ideas? TIA, Ramesh.

4 4

Scheduler question
by Chuck Kraly 08 Mar '10

08 Mar '10

Ok guys, I got the weather scripts running on 27078. I can command a manual voice report via DTMF. What i am having problems with is getting the scheduler to play the daily report at 6am and 1pm local time. I have the cron set up ok to run the update scripts, and like I said touch toning them manually is no problem. What I have done so far: in rpt.conf, [macro] 1 = *94# ; ; Scheduler - execute a macro at a given time ; [schedule] ;dtmf_function = m h dom mon dow ; ala cron, star is implied 1 = 15 6,13,19 * * * ; at 6:15,13:15, execute macro 1. What am I missing here (notice i tried to set the times for 6:15, 13:15, and 19:15 daily. Also I know I saw it in the archives ( but cannot seem to run across it again- if I make changes to rpt.conf or some other file, what is the command to reload that file so asterisk sees the changes? Or do i have to reboot the machine (like I have been doing) Off list answers welcomed...... Chuck K0XM 27064, 27077, 27078

2 1

prodding channel
by Ken 08 Mar '10

08 Mar '10

I have updated to version 0.216 yesterday - it is running well on my setup, except I am seeing some warning messages that I do not recall seeing before WARNING[19250]: channel.c:2590 ast_prod: Prodding channel 'Zap/pseudo-470869475' failed What does it mean? Ken Jamrogowicz I guess I should mention that I have been running a 64 bit compile of app-rpt for a couple of weeks now.

2 2

pap2t for app_rpt
by Valerij Sorokin 04 Mar '10

04 Mar '10

Dear Sirs! We have ATA Linksys PAP2T 2 FXS ports. Can I use it instead of Digium PCI FXS card for connection to radio ICOM IC-F110? In PAP2T I can configure FXS port several polarity for incoming and outgoing calls so, that I can use a radio interface like this http://www.hamwlan.net/interface_RPT.htm. Best regards, Valerij.

2 1

iaxrpt gain?
by Ken 04 Mar '10

04 Mar '10

sorry if this is the wrong place for this question, but I would expect it to be related to rpt.conf so I though I would ask here. I am trying IAXrpt for the first time and the volume coming in from the PC is way too low, even with the mic gain turned up to where the green 'led' bar lights up full scale. Another user connecting from outside experienced the same thing. We are both using version 1.1.27 of the program. I note that there are adjustments for IRLP and echoLink. Is IAXrpt supposed to look exactly like another asterisk node and therefore not need an explicit gain control? If so, why is the level so low when linked IAX nodes sound OK? on the same subject: is rxgain, in this usage, taken to refer to what Asterisk is receiving from the internet? Or what the internet is getting while using Asterisk as its receiver? Both seem like plausible meanings to me. Thanks Ken Jamrogowicz

2 1

radio interface
by Valerij Sorokin 03 Mar '10

03 Mar '10

Dear Sirs! Can app_rpt work with Signalink USB by Tigertronic? Or only with pc108 chip based sound card? Best regards, Valerij.

3 2

Calling Don, W9DRR...
by Ramesh Dhami (VA3UV) 03 Mar '10

03 Mar '10

Don; Been trying to reach you via direct email.... I have your components, please contact me! Thx, Ramesh.

1 0

USB Hub
by Scott Weis 03 Mar '10

03 Mar '10

After trying every USB 2.0 Hub I can find in my office and at home, I have found none that work with my setup. Can anyone point me to a good source of know working multi-tt hubs? Thanks & 73 Scott KB2EAR

5 7

DTMF disable or rf side
by REDBUTTON_CTRL 01 Mar '10

01 Mar '10

HI All, is there a function in APP_Rpt that can be used to disable any DTMF from being decoded from the RF side but still work from the console? Today there was an individual trying to linkup _*all*_ the Allstar nodes to a particular node. It might be useful to use this feature to lock down a node to prevent his happening in the future if such an attack of the twitchy fingers happens again. Thanks, Jon VA3RQ

3 2