March 2011 - App_rpt-users - lists.keekles.org

connected to stations
by Ryan Collier 04 Mar '11

04 Mar '11

Does anyone know how I can block the telemetry from the stations I am connected to but I can still keep mine? 73 Ryan KB8PMY 27130 27540

1 0

Has anyone tried a Seagate Dockstar?
by Gary - K7EK 04 Mar '11

04 Mar '11

I just discovered the Seagate Dockstar: http://www.seagate.com/www/en-us/products/network_storage/freeagent_docksta… and how to put Debian on it: http://www.jeff.doozan.com/debian/ Has anyone put a Asterisk ham node on Dockstar yet? -- Best regards, Gary E. Kohtala - K7EK / AFF0WA / AFA0IU / AFE0DM

1 0

Re: [App_rpt-users] new node setup
by VE3GIH Gord Hewit 03 Mar '11

03 Mar '11

Jim; I'm only about four months ahead of you on this learning curve, but I think I can help. Can I assume that when you followed the on screen installation instructions, that you told the internet connected PC to go to the Allstarlink website and download the configuration for node 27620 from there? In terms of troubleshooting the URI...When you say it didn't recognize the URI, do you mean that the green LED on the URI is lit, but not flashing?? If so, you may have it in the wrong USB port. -From your login prompt, enter 'root', and then enter the password you entered during configuration. You should see a # prompt. -Enter the command 'lsusb'. This will give you a list of USB ports on the computer. One of them will be the CM103 URI. Write down that port number. -Enter the command 'cd /etc/asterisk' -Enter the command 'nano usbradio_tune_usb27620.conf' -You are now in an editor. Look for the line 'devstr=', and change it to your USB port. My file is shown below as an example. [usb27465] ; VHF Repeater ; name=usb27465 ; devicenum=0 devstr=2-1 rxmixerset=250 txmixaset=500 txmixbset=500 rxvoiceadj=1.621496 rxctcssadj=4.147342 txctcssadj=400 rxsquelchadj=875 -Press "Cntl O", then Enter, then "Cntl X" to save an exit the nano editor -At the # prompt, type these commands service asterisk stop service asterisk start If all has gone well, the green LED on the URI will begin to flash. If you get that far, I can give you the instructions to transmit in a second email. Gord Hewit 289-800-1473 -----Original Message----- Message: 1 Date: Thu, 3 Mar 2011 06:43:53 -0700 From: "James H Vernetti" <wd0ekr(a)msn.com> To: "App_rpt-users" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] new node setup I have the interface built and the Acid disk installed on the computer, and it has come up with TEST LOGIN. Where do I go from here? I was expecting it to recognize the URI and take me to a setup screen but it is not doing it. Jim wd0ekr Node 27620

1 0

Auto Patch Gain Question
by KI6PSP (Ed) 03 Mar '11

03 Mar '11

How can I change the auto patch gain. When I open the auto patch, the dial tone over deviates on the radio. I attempted to add in rxgain=-9.0 and txgain=-9.0 in the channels stanza of zapata.conf but I still have the over deviation on the dial tone. KI6PSP (Ed)

2 1

new node setup
by James H Vernetti 03 Mar '11

03 Mar '11

I have the interface built and the Acid disk installed on the computer, and it has come up with TEST LOGIN. Where do I go from here? I was expecting it to recognize the URI and take me to a setup screen but it is not doing it. Jim wd0ekr Node 27620

1 0

Recording
by Matt Brennan 01 Mar '11

01 Mar '11

Good Morning, I have a system currently running app_rpt which has had some minor abuse issues in the recent past. As a result we would like to start recording (preferably as an MP3) all audio that passes through the controller. Has anyone done this before? I couldn't seem to find anything suggesting the best way to implement this... Thanks for any help, Matt Brennan, NM1B

3 2

Updating Echolink
by KI6PSP (Ed) 01 Mar '11

01 Mar '11

How do I go about updating just the Echolink section. I know I can download and re-compile everything, but I would rather not. It overwrites all of my custom audio files everytime I do that. This is what I currently do to update my system: cd /usr/src rm -rf astsrc wget http://allstarlink.org/svn-trunk.tar.gz -O- | tar xzv mv trunk astsrc cd astsrc make upgrade-acid cd /tmp/ wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-addons-1.4.13… tar -xf asterisk-addons-1.4.13.tar.gz cd asterisk-addons-1.4.13 make clean ./config make install service asterisk restart -- KI6PSP (Ed)

1 0

errors in compileing sources
by George Csahanin 01 Mar '11

01 Mar '11

Scratching my head on this, can anyone help me with what to look for that is missing? What is net_device "priv"? Here's the tail end of teh compiler out: /usr/trunk/zaptel/kernel/wctc4xxp/base.c:63:1: warning: "WARN" redefined In file included from /usr/src/linux-2.6.29.6/arch/x86/include/asm/bug.h:38, from include/linux/kernel.h:21, from /usr/trunk/zaptel/kernel/wctc4xxp/base.c:23: include/asm-generic/bug.h:81:1: warning: this is the location of the previous definition /usr/trunk/zaptel/kernel/wctc4xxp/base.c: In function 'wctc4xxp_net_set_multi': /usr/trunk/zaptel/kernel/wctc4xxp/base.c:611: error: 'struct net_device' has no member named 'priv' /usr/trunk/zaptel/kernel/wctc4xxp/base.c: In function 'wctc4xxp_net_up': /usr/trunk/zaptel/kernel/wctc4xxp/base.c:619: error: 'struct net_device' has no member named 'priv' /usr/trunk/zaptel/kernel/wctc4xxp/base.c: In function 'wctc4xxp_net_down': /usr/trunk/zaptel/kernel/wctc4xxp/base.c:634: error: 'struct net_device' has no member named 'priv' /usr/trunk/zaptel/kernel/wctc4xxp/base.c: In function 'wctc4xxp_net_hard_start_xmit': /usr/trunk/zaptel/kernel/wctc4xxp/base.c:651: error: 'struct net_device' has no member named 'priv' /usr/trunk/zaptel/kernel/wctc4xxp/base.c: In function 'wctc4xxp_poll': /usr/trunk/zaptel/kernel/wctc4xxp/base.c:712: warning: passing argument 1 of 'netif_rx_complete' from incompatible pointer type /usr/trunk/zaptel/kernel/wctc4xxp/base.c:712: error: too many arguments to function 'netif_rx_complete' /usr/trunk/zaptel/kernel/wctc4xxp/base.c: In function 'wctc4xxp_net_get_stats': /usr/trunk/zaptel/kernel/wctc4xxp/base.c:721: error: 'struct net_device' has no member named 'priv' /usr/trunk/zaptel/kernel/wctc4xxp/base.c: In function 'wctc4xxp_net_ioctl': /usr/trunk/zaptel/kernel/wctc4xxp/base.c:758: error: 'struct net_device' has no member named 'priv' /usr/trunk/zaptel/kernel/wctc4xxp/base.c: In function 'wctc4xxp_net_register': /usr/trunk/zaptel/kernel/wctc4xxp/base.c:794: error: 'struct net_device' has no member named 'priv' /usr/trunk/zaptel/kernel/wctc4xxp/base.c: In function 'wctc4xxp_net_capture_cmd': /usr/trunk/zaptel/kernel/wctc4xxp/base.c:886: warning: passing argument 1 of 'netif_rx_schedule' from incompatible pointer type /usr/trunk/zaptel/kernel/wctc4xxp/base.c:886: error: too many arguments to function 'netif_rx_schedule' make[4]: *** [/usr/trunk/zaptel/kernel/wctc4xxp/base.o] Error 1 make[3]: *** [/usr/trunk/zaptel/kernel/wctc4xxp] Error 2 make[2]: *** [_module_/usr/trunk/zaptel/kernel] Error 2 make[2]: Leaving directory `/usr/src/linux-2.6.29.6' make[1]: *** [modules] Error 2 make[1]: Leaving directory `/usr/trunk/zaptel' make: *** [all] Error 2

3 4

Re: [App_rpt-users] Registration Weirdness
by Michael Kaufman 01 Mar '11

01 Mar '11

Hi Group: My XYL also an amateur radio operator has registered for the allstar network several times and has not received any confirmation of registration, (last time about a week ago). Two of our local club members registered recently and were confirmed almost instantly. Is there a specific contact that can help my XYL with her registration. Mike WB9SLI Node 27558

2 1