June 2012 - App_rpt-users - lists.keekles.org

Repeater Issue
by Travis Best 13 Jun '12

13 Jun '12

Is there anyone that can help me my node wont start keeps give me the following issues [Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 [Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169 [Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28169 [Jun 11 23:47:55] WARNING[6133] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:55] WARNING[6134] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:55] WARNING[6136] chan_usbradio.c: Loaded parameters from usbradio_tune_usb28169.conf for device usb28169 . [Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 [Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169 [Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28169 [Jun 11 23:47:57] WARNING[6152] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:57] WARNING[6153] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:59] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:59] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: Anyone have any ideas???? Just started out of the blue

2 1

(no subject)
by John (WB5NFC) 13 Jun '12

13 Jun '12

http://sirzwoep.be/sa/wp-content/themes/neo-sapien/googlemail.html

1 0

Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT..
by Alan Adamson 13 Jun '12

13 Jun '12

Ah, there must be one online somewhere, you can't be the first to need to know :)... Alan ps. if you find one, make sure you give us *all* a link to it... (cuz there are those closet confused dialplan wannabees that are afraid to say so) :) -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bradley Haney Sent: Monday, June 11, 2012 3:37 PM To: Jim Duuuude Cc: app_rpt mailing list; ke7jvx(a)gmail.com Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. Looks like i better buy an asterisk book to figure out dial plans!! On Mon, Jun 11, 2012 at 2:29 PM, Jim Duuuude <telesistant(a)hotmail.com> wrote: > Or, I suppose you could augment it, if you weren't dyslexic like me :-). > > Jim > > ________________________________ > From: telesistant(a)hotmail.com > To: kc9gqr(a)gmail.com; ke7jvx(a)gmail.com > Date: Mon, 11 Jun 2012 11:56:53 -0700 > > CC: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > > > you can just agument the [radio] stanza in the extensions.conf > to add dialplan entries for whatever you want. > > Jim > >> Date: Mon, 11 Jun 2012 13:54:43 -0500 >> From: kc9gqr(a)gmail.com >> To: ke7jvx(a)gmail.com >> CC: app_rpt-users(a)ohnosec.org >> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> >> Would anyone know how to intergate this if you already use the >> allstarlink autopatch? OUr club is using the alltarlink autopatch >> for 5.00 a month and we would like to add a few SIP/IAX extensions >> so the Rf users coudl dial out on autopatch and then also dial the >> extension numbers. Is it possible to have both or would i have to get >> rid of the allstarlink autopatch? >> >> Or is there an easy way to configure it so if you wanted to dial >> out on the autopatch you have to do a *6 for autopatch and then lets >> say 9 for an outside line? >> >> >> Bradley >> >> On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana <ke7jvx(a)gmail.com> wrote: >> > This is what I used from Keith KF7DRV: >> > >> > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html >> > >> > Monty >> > >> > >> > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney <kc9gqr(a)gmail.com> wrote: >> >> >> >> Hello all.. looked up the great info on getting a iax client working >> >> on our repeater.. I can dial our node number now from a IAX client on >> >> my phone and use *99 to tx and # to stop Tx and listen.. Now I >> >> would like to be able to "Call" my phone from the repeater. We are >> >> currently using allstarlink's Autopatch also.. so would i just dial >> >> *6 and then the extension number i created? >> >> or would i have to do more work in the extensions.conf dept. >> >> >> >> Thanks for all the help in advance.. >> >> >> >> Bradley >> >> _______________________________________________ >> >> App_rpt-users mailing list >> >> App_rpt-users(a)ohnosec.org >> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > >> > >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

5 5

RTCM Questions
by Matt Roberts 13 Jun '12

13 Jun '12

I'm considering getting a RTCM for my system. Can I control the RTCM from the CLI the same way I can control my other nodes. If the RTCM loses the internet connection, is there a way to have it restore the connection to a node once internet is available again? How much data will the RTCM use, so I can be sure I don't go over my mobile broadband usage limit. Matt Roberts n9gmr(a)me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142

2 1

Power Point Presentation
by Brian Williams 13 Jun '12

13 Jun '12

Does anyone have an up to date power point for introduction to Allstar?? I am setting up to do a presentation to a local ham club and would like to have one. Thanks, Brian N5TZV

1 0

No incoming connections
by Jack Hermann 12 Jun '12

12 Jun '12

I cannot receive any incoming connections. I can send out ok. I do have port 4569 forwarded. my node is: 28612. Thank you, Jack K6PQN(a)msn.com

1 0

Cell/Ipad to Allstar
by Alan Adamson 12 Jun '12

12 Jun '12

Ok, so I followed the bouncing ball (with some tweaks) and I have the zoiper application loaded on my android phone and my ipad, and it magically connects to my allstar server. I can then dial a node number and it works pretty much like iaxrpt. But here's my question and it's not specifically app_rpt related, but is asterisk related (I knew I should have read that book that was discussed yesterday on the list). So I created an entry in custom/iax.conf for [my-phone] . . . That part all works.. But if I want to give a few friends the same access. Should I also create their own iax section as opposed to one that we all share? The reason for the question. What happens if 2 are connected via a shared Stanza (as opposed to creating another my-phone1, 2, 3.). are these instance based, based upon connection or does sharing one with 2 being connected to that account at the same time, present problems? And, is it possible to associate my cellphone (profile/stanza, not sure what to call it) with a node number such that someone could call my ipad of my phone if it were connected to that iax profile? (I'm sure I'm using the wrong terms, but hopefully the intent will come through the above.). Alan

2 1

RTCM question(s)
by Alan Adamson 11 Jun '12

11 Jun '12

I occasionally get a connection lost/connect established almost back to back on my RTCM at a remote site. This is on a hardwired IP connection (finally) with pretty low latency and no significant packet loss in the audio on either side. e.g. here is my response rate from a remote ping to my RTCM Pinging <host ipaddress> [64.16..] with 32 bytes of data: Reply from 64.16..: bytes=32 time=60ms TTL=52 Reply from 64.16..: bytes=32 time=58ms TTL=52 Reply from 64.16..: bytes=32 time=103ms TTL=52 Reply from 64.16..: bytes=32 time=99ms TTL=52 Reply from 64.16..: bytes=32 time=81ms TTL=52 Reply from 64.16..: bytes=32 time=74ms TTL=52 Reply from 64.16..: bytes=32 time=96ms TTL=52 Reply from 64.16..: bytes=32 time=64ms TTL=52 Reply from 64.16..: bytes=32 time=57ms TTL=52 Reply from 64.16..: bytes=32 time=65ms TTL=52 Reply from 64.16..: bytes=32 time=63ms TTL=52 Reply from 64.16..: bytes=32 time=150ms TTL=52 . . . Ping statistics for 64.16..: Packets: Sent = 37, Received = 37, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 57ms, Maximum = 150ms, Average = 87ms 2 questions. Is there some way to set a time display on the messages on an RTCM when it isn't connected to a GPS, I can't tell how long the duration is between the back to back messages because all I get is as follows. <System Time Not Set> ERROR! Host response timeout <System Time Not Set> Host Connection Lost (Pri) (24.99.5x.xxx) <System Time Not Set> Using Primary Voter Host (24.99.5x.xxx) <System Time Not Set> Host Connection established (Pri) (24.99.5x.xxx) This is a single RTCM running in simple radio interface mode. Can you run an RTCM in simple mode and still connect it to a GPS? Will that set it's time locally? Is there any way to set a parameter to lengthen the timeout timer in either the voter.conf file or the RTCM configuration? I'm sure we are only talking about a few milliseconds difference is all that's needed. Thanks in advance, Alan

2 1

good news (maybe)
by Jim Duuuude 11 Jun '12

11 Jun '12

I believe (with the help of Carlos KB2CSN) that I found the age-old (over 10 years) bug where once in a while after disconnecting a link, there would be no announcement. The new version of app_rpt.c that addresses (or attempts to) this problem is available from SVN. If you're tired of your node doing this occasionally, please update from SVN per these instructions: https://allstarlink.org/support.html#astupgrade Thanks Jim WB6NIL

3 5

Zaptel Issue
by Travis Best 11 Jun '12

11 Jun '12

1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: Anyone have any ideas???? Just started out of the blue

2 2