April 2013 - App_rpt-users - lists.keekles.org

svn or not
by Pierre Martel 08 Apr '13

08 Apr '13

My nodes are doing perfect now, Just one question.... What is most recommanded? waiting for official update or run the svn build? Pierre VE2PF

1 0

Re: [App_rpt-users] Finally!
by Pierre Martel 08 Apr '13

08 Apr '13

Funny, very funny.. Got it to go back online in less the 5 minute after a smart man gave me just a hint.. One thing my parents told me, if you cant help or say something usefull, keep what you want to say to you.. It helped me a few time, I know I should again keep this to myself, cause you surely wont be taking it as something usefull (but you really should).. But never less I’ll press send anyway.. From: Bob(a)w5evh.org Sent: Sunday, April 07, 2013 10:38 PM To: Pierre Martel Subject: Re: [App_rpt-users] Finally! Quick, plug in your RC210!! boB On Apr 7, 2013, at 8:23 PM, "Pierre Martel" <petem001(a)hotmail.com> wrote: Thnaks David.. but now I am in deep shit after rebooting the server I have this.. /usr/sbin/safe_asterisk: line 125: 2818 Segmentation fault (core dumped) nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} >&/dev/${TTY} < /dev/${TTY} Asterisk ended with exit status 139 Asterisk exited on signal 11. Automatically restarting Asterisk. mpg123: no process killed Asterisk ended with exit status 1 Asterisk died with code 1. HELP!!! the repeater is down and cant do anything to fix this!!! From: David KE6UPI Sent: Sunday, April 07, 2013 8:48 PM To: Pierre Martel Cc: APP RPT Subject: Re: [App_rpt-users] Finally! Sorry, Good Job Pierre David On Sun, Apr 7, 2013 at 3:32 PM, Pierre Martel <petem001(a)hotmail.com> wrote: Hi all! I finaly got my 2 node machine connected to my club repeater’s, Bye Bye RC-210! So my node’s 27821 (UHF desktrac for now), and 28739 (VHF msr2000 receiver and a moded maxtrax 300 as exiter + msr 2000 100 watt PA) are online. I did not had a test set when I did te setting, so my audio is not as good as it should be. (waiting for a friend to have some time to come fix this). Is there a way to have 2 node’s with number’s that follow each other? I dont want to clog the system with unused node number, so I ask before filling for new node’s number ;-) Now If I could understand macro’s and a few other thing all would be fine!! Thanks again to the coder’s , you have no idea how prood I am to made it work. (And the guy’s at the club look at me as if I am a guru ;-) ) Now I know that I am the first in Quebec to have fully controled app_rpt repeater, no hardware controler just a good computer! Pierre Ve2PF p.s. we use to have some noise in our audio on VHF now its as if we work on a line not RF the ausio is so clean guy’s can’t beleive it.. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

Re: [App_rpt-users] Finally!
by Pierre Martel 08 Apr '13

08 Apr '13

Re: [App_rpt-users] Finally!You gave me the hint that I needed, I went to the usbradio.conf file and commented out ctcssfrom=dsp and it started back.. It is not a normal thing? From: Keith Goobie Sent: Sunday, April 07, 2013 9:32 PM To: Pierre Martel Subject: Re: [App_rpt-users] Finally! How are you detecting carrier ctcss – is it DSP? Keith On 4/7/13 9:23 PM, "Pierre Martel" <wlmailhtml:petem001@hotmail.com> wrote: Thnaks David.. but now I am in deep shit after rebooting the server I have this.. /usr/sbin/safe_asterisk: line 125: 2818 Segmentation fault (core dumped) nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} >&/dev/${TTY} < /dev/${TTY} Asterisk ended with exit status 139 Asterisk exited on signal 11. Automatically restarting Asterisk. mpg123: no process killed Asterisk ended with exit status 1 Asterisk died with code 1. HELP!!! the repeater is down and cant do anything to fix this!!! From: David KE6UPI <mailto:dshaw@ke6upi.com> Sent: Sunday, April 07, 2013 8:48 PM To: Pierre Martel <mailto:petem001@hotmail.com> Cc: APP RPT <mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Finally! Sorry, Good Job Pierre David On Sun, Apr 7, 2013 at 3:32 PM, Pierre Martel <wlmailhtml:petem001@hotmail.com> wrote: Hi all! I finaly got my 2 node machine connected to my club repeater’s, Bye Bye RC-210! So my node’s 27821 (UHF desktrac for now), and 28739 (VHF msr2000 receiver and a moded maxtrax 300 as exiter + msr 2000 100 watt PA) are online. I did not had a test set when I did te setting, so my audio is not as good as it should be. (waiting for a friend to have some time to come fix this). Is there a way to have 2 node’s with number’s that follow each other? I dont want to clog the system with unused node number, so I ask before filling for new node’s number ;-) Now If I could understand macro’s and a few other thing all would be fine!! Thanks again to the coder’s , you have no idea how prood I am to made it work. (And the guy’s at the club look at me as if I am a guru ;-) ) Now I know that I am the first in Quebec to have fully controled app_rpt repeater, no hardware controler just a good computer! Pierre Ve2PF p.s. we use to have some noise in our audio on VHF now its as if we work on a line not RF the ausio is so clean guy’s can’t beleive it.. _______________________________________________ App_rpt-users mailing list wlmailhtml:App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users ------------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list wlmailhtml:App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- wlmailhtml:keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA

1 0

Finally!
by Pierre Martel 08 Apr '13

08 Apr '13

Hi all! I finaly got my 2 node machine connected to my club repeater’s, Bye Bye RC-210! So my node’s 27821 (UHF desktrac for now), and 28739 (VHF msr2000 receiver and a moded maxtrax 300 as exiter + msr 2000 100 watt PA) are online. I did not had a test set when I did te setting, so my audio is not as good as it should be. (waiting for a friend to have some time to come fix this). Is there a way to have 2 node’s with number’s that follow each other? I dont want to clog the system with unused node number, so I ask before filling for new node’s number ;-) Now If I could understand macro’s and a few other thing all would be fine!! Thanks again to the coder’s , you have no idea how prood I am to made it work. (And the guy’s at the club look at me as if I am a guru ;-) ) Now I know that I am the first in Quebec to have fully controled app_rpt repeater, no hardware controler just a good computer! Pierre Ve2PF p.s. we use to have some noise in our audio on VHF now its as if we work on a line not RF the ausio is so clean guy’s can’t beleive it..

2 3

Logwatch and AllStar
by Bob Roszkowski 07 Apr '13

07 Apr '13

Does anyone know how to incorporate AllStar logging into Logwatch? It would be nice to get a report daily on all the nodes that connected to the node, errors, echolink connects and stuff. thanks -- boB - W5EVH

1 0

Deepest Apologies ...
by Tony Youngblood 06 Apr '13

06 Apr '13

AllStar Network - I was informed that i was waaaaay out of context speaking a word about anything. I can not apologize enough and not sure if that would do any good either at this point. I misunderstood and previously was wrongfully misinformed about a few things that generated not so good results. I feel terrible and have only been trying to help ... But fact of the matter i crossed the line and can reassure that this will absolutely never happen again, and respectfully accept any punishment ive brought upon myself. I have removed any existing content i had available and will not be able to answer any Q?'s relating. Again i apologize for the havoc i have created, i have from the bottom of my heart been trying to help ... with positive and good intentions - But confusingly at the moment it's been been anything but ive been told. I am very very very sorry Duuuude. "No Good Deed Goes UnPunished" 73 T

1 0

MicroStar_Available NOW ... part3
by Tony Youngblood 06 Apr '13

06 Apr '13

http://allstarnode.com/viewtopic.php?f=14&t=85&sid=3f1fc88e140bab34d81317ea… http://www.qsl.net/k5try/ ^^^click AstarvMon^^^ There is 2 versions ... One is for the microStar nodes (stand alone single node) ... The other is for the acid distro (multi nodes) ((but not yet released)) ... There is also an AllStar vMap program up and running right now. Not sure if this will be downloadable for AcID servers but it's defo up and working now. More Laterz! 73 T ;(;) http://qsl.net/k5try/ ;(;)

2 1

MicroStar_Available NOW ...
by Tony Youngblood 05 Apr '13

05 Apr '13

Duuuude got the subscribe stuff working i believe! Sign up w the MicroStar server and ADD your RtCM for a stand Alone allStar node ... No Linux Box needed, just the RtCM. attachment is screen shot of where u subscribe ... hope it uploads ok. 73 k5TRY

2 1

Don't have much hair left.
by R.K. 03 Apr '13

03 Apr '13

Hello group, Name is Ron, VK3ANT from Melbourne, Australia. I am new to the group so please take it easy on me when I goof up here I set up a AllStar server and a node here at home, well I didn’t do much, a chap ( Tony ) in Arkansas did most of it and it was working pretty well until a few days ago. One thing he couldn’t get going was the time and there was an issue with the status page where my node ( 28467 ) could not be seen. Anyway, he sent me some info to try a few things and well, you guessed it, I muffed the server, you might say I murdered it, now I have nothing. I am using an RTCM here ( well I was ) and all was working pretty well as I said. I have never messed around with the Linux system and hence I was/are very unfamiliar playing with it. Tony, being a guru knew what he was doing and so when he configured my server he did so manually and outside the AllStar Portal. Now that all that configuration has gone, well I am “trying” ( read hair pulling ) to reconfigure my server within the pages of the portal, but when I download the information it just gives me all these hundreds of error messages. I ran the Acid disc over my server PC again which takes about an hour, I don’t have a static IP address so when it asked the question, I answered “N”, it goes through quite a process until it gives me more questions wanting my Portal Log In and Password, continues with the server config for a while longer and finally comes to the “ test login “ page. To this point I figured I was going OK. Back in the Portal now and I created and submitted the server details, got the reply of Congratulations ..etc. then I continue to fill in the pages as required and submitting them at the end of the process. After all that I try to download the server information, click the “initiate” button, then I see nothing, not a thing happens. I can leave things running all night and when I get up in the morning, still nothing. Where I am thinking my problem lies is that Tony set the server up manually, and I have read somewhere on the portal pages that I am now not able to reconfigure the server from the portal pages, is this correct, if so, am I able to delete my old server information from the main AllStar server itself then setup a whole new server using the setup pages on the Portal ? Getting to be a little bit desperate here as, like I say, it takes a good hour to set up the server each time I run the Acid disc over it again, so I am now trying to not have to do that again. Can any of you guys give me any information where things are going wrong or maybe point me toward a page that I can read about it. Thanks people. 73 de Ron. VK3ANT ======= Email scanned by PC Tools - No viruses or spyware found. (Email Guard: 9.0.0.2308, Virus/Spyware Database: 6.21080) http://www.pctools.com/ =======

2 1

Unable to connect to Allstar node 29452
by Darren Carleton 02 Apr '13

02 Apr '13

This is a new node and my first try to get Allstar Link up and running. I have setup the port forwarding UDP 4569. Pushed the configuration for node and server from allstarlink.org. Files show up with correct login/pw. Please assist/provide me next steps. Thanks!DarrenKJ6KFB

2 1