October 2016 - App_rpt-users - lists.keekles.org

Install password
by Lu V 11 Oct '16

11 Oct '16

All, I'm going through some old boxes in storage and testing them out. I don't recall if it has acid or xipar. It's got Centos release 6.4. Anyone recall what the original acid installation password was? Email me directly please thank you. Lu Vencl KA4EPS

1 0

Mantis
by Monty 10 Oct '16

10 Oct '16

Are we still using the following link for bug reporting in Mantis? http://ohnosec.org/mantis If so, I'm trying to report an issue with DIAL and there isn't a DIAL project option. Monty

1 0

DIAL Help Please
by Steve Mahler 09 Oct '16

09 Oct '16

Good Morning! I swapped PCs yesterday on my repeater, and now a big problem. Please, I need some help from DIAL Wizards. The critical problem is the RX audio does not get transmitted, but all other audio paths seem to work. Additional information ... 1. iaxRpt connects normally, and plays at normal level audio from the RX, also transmitting from iaxRpt goes to the TX at a normal level 2. Links to other repeaters, no problem to hear distant audio, but RX audio is not sent to the distant repeater (but goes out on other IAX links) 3. Playing audio files from app-rpt are heard on the transmitter at normal levels. Configuration ... i) RX is discriminator audio to URI, no COS/COR/PL signaling ii) TX is voice audio and a separate PL audio mixed in the radio. Process ... A. I took a second PC and loaded DIAL. B. I updated files in /etc/asterisk C. usbradio_tune_usb42316.conf and patched in the new devstr, but left all the levels the same D. usbradio_tune_usb42316.conf ... I noted the new "fever=1" (and have tried it at values 0 and 1) but have found no documentation for fever. E. I swapped the new PC for the old PC ... same URI, Ethernet, etc. ... It worked, but I missed the RX to TX loss problem during the install. F. Note, when you unkey the courtesy tone, tail messages, etc. play Thinking ... a. It is like the DSP PL is not working but I am using the same config I did under ACID b. Setting rxctcssoverride = 1 does not change the operation. ANY information about necessary changes between ACID and DIAL, or just proper DIAL operation appreciated. I would hate to have to reinstall the ACID based PC. ...STeve - KF5VH

4 4

Set time remotely
by Steve Denbow 09 Oct '16

09 Oct '16

I'm running a RPi 3 with DIAL as a standalone controller for my repeater (no ISP to site....yet). Is there a way to remotely set the time via DTMF? Thanks

1 0

Re: [App_rpt-users] IAX/Zoiper Audio and Level
by Steve Zingman 08 Oct '16

08 Oct '16

What is the script? On Oct 8, 2016 3:06 AM, Te Bussell <welfarecat(a)comcast.net> wrote: I downloaded the Android app on my Samsung phone based on the message quoted below. I have IaxRpt working from my laptop along with Allmon2. I had some help from a brilliant young woman, and I thank her. HERE IS THE PROBLEM: when she tried to set up the script to work with both Android and PC IaxRpt, the script had a syntax error, and would not work. I used to modify and write UNIX scripts for an ancient but capable aerospace publishing system. I know that a misplaced or unbalanced operator will fail. Most of my scripts were ksh, and I knew a method in those days to actually test the script within a command line environment. Sorry to say I have cobwebs on what I did in the past. So it would be helpful to see an example of a script that accomplishes both goals as stated above. In addition, I don't see a way forward for setting up the Android app. Cheers and 73 KB9WKR Bill Sent from my iPad On Sep 26, 2016, at 8:54 PM, Te Bussell <welfarecat(a)comcast.net> wrote: Sent from my iPad Begin forwarded message: *From:* Steve Zingman <szingman(a)msgstor.com> *Date:* September 26, 2016 at 1:25:56 PM EDT *To:* no1pc(a)yahoo.com, "app_rpt-users(a)ohnosec.org" < app_rpt-users(a)ohnosec.org> *Subject:* *Re: [App_rpt-users] IAX/Zoiper Audio and Level* There is a Android app written to connect to AllStar. It has a mic gain control. <https://play.google.com/store/apps/details?id=org.dvswitch> On 9/24/2016 8:12 PM, no1pc(a)yahoo.com wrote: Just got things setup so Zoiper works on my node. I can connect and pass voice from PC client and Droid clients - but the audio level from those going out to the Transmitter is low. Is there a way to adjust that? The iPhone client connects but does not yet pass voice... still working on that. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Just say no to world domination" _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Re: [App_rpt-users] IAX/Zoiper Audio and Level
by Te Bussell 08 Oct '16

08 Oct '16

I downloaded the Android app on my Samsung phone based on the message quoted below. I have IaxRpt working from my laptop along with Allmon2. I had some help from a brilliant young woman, and I thank her. HERE IS THE PROBLEM: when she tried to set up the script to work with both Android and PC IaxRpt, the script had a syntax error, and would not work. I used to modify and write UNIX scripts for an ancient but capable aerospace publishing system. I know that a misplaced or unbalanced operator will fail. Most of my scripts were ksh, and I knew a method in those days to actually test the script within a command line environment. Sorry to say I have cobwebs on what I did in the past. So it would be helpful to see an example of a script that accomplishes both goals as stated above. In addition, I don't see a way forward for setting up the Android app. Cheers and 73 KB9WKR Bill Sent from my iPad > On Sep 26, 2016, at 8:54 PM, Te Bussell <welfarecat(a)comcast.net> wrote: > > > > Sent from my iPad > > Begin forwarded message: > >> From: Steve Zingman <szingman(a)msgstor.com> >> Date: September 26, 2016 at 1:25:56 PM EDT >> To: no1pc(a)yahoo.com, "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> >> Subject: Re: [App_rpt-users] IAX/Zoiper Audio and Level >> >> There is a Android app written to connect to AllStar. It has a mic gain control. >> <https://play.google.com/store/apps/details?id=org.dvswitch> >> >>> On 9/24/2016 8:12 PM, no1pc(a)yahoo.com wrote: >>> >>> Just got things setup so Zoiper works on my node. >>> >>> I can connect and pass voice from PC client and Droid clients - but the >>> audio level from those going out to the Transmitter is low. Is there a >>> way to adjust that? >>> >>> The iPhone client connects but does not yet pass voice... still working >>> on that. >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>> >> >> -- >> "Just say no to world domination" >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Possible U-Verse ISP issues
by Lu Vencl 08 Oct '16

08 Oct '16

All, I posted an issue the other day about not being able to register with register.allstarlink.org. I spent about 9 hours troubleshooting and just could not make heads or tails on why this was occurring.. Had even two of the top guys here look into it.. Suddenly it started to work 24 hours later or so. Now suddenly I can't reach another one of my nodes all the way in Colorado, but if I route over another network it does. Traceroutes look bad as well. So wanted to bring it up in case anyone else is having some strange issues as I think there is a much bigger problem ongoing on some of the backhaul providers. I am using AT&T U-verse in Florida and in Colorado I am using Peakinter.net fiber 100/100 So if you are also having issues, let me know please.. I will be calling them in the AM if it is not cleared up by then. I am hitting the hey, had a long day restoring cell sites after a hurricane. Lu KA4EPS

1 0

Help please registration failure
by Lu V 06 Oct '16

06 Oct '16

As most of you know, we are about to get hit with a major hurricane. For some reason the Florida hub 27892 decided that it is no longer registered with Allstar. Is there a known issue or can someone assist me please I have a handful and trying to figure this out with no avail. I can ping the server but it will not register. If you can help me please reply. Lu Vencl

2 1

Fwd: echolink blocking
by Joe Moskalski 06 Oct '16

06 Oct '16

Have you tried the swissarmy program, that has an access control list feature. Here are the links: http://www.qsl.net/k0kn/swissarmy_README http://www.qsl.net/k0kn/swissarmy http://www.qsl.net/k0kn/scripts.html On Thu, Oct 6, 2016 at 11:12 AM, Bryan D. Boyle <bdboyle(a)bdboyle.com> wrote: > without getting too complicated...what I did was set up a dummy node and > assigned my echolink to that. Now, if I need to, via a script on a public > node, I can connect the dummy to my hub and come in via echo or use it for > nets, but, for the most part, it's disconnected and pretty much a dummy > load for drive bys. > > -- > Bryan > Sent from my iPhone 6S...No electrons were harmed in the sending of this > message. > > > > On Oct 6, 2016, at 10:00, Greg <kb1ncj(a)gmail.com> wrote: > > I saw the instructions on app_rpt site but does any one know more wildcard > type rules? Trying to kill off the annoying drive bys. I want to allow > -L,-R's and my choice user type connections and block all else. Also does > this filter only apply to incoming connections? > Greg > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mai > lman/listinfo/app_rpt-users and scroll down to the bottom of the page. > Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mai > lman/listinfo/app_rpt-users and scroll down to the bottom of the page. > Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. >

1 0

echolink blocking
by Greg 06 Oct '16

06 Oct '16

I saw the instructions on app_rpt site but does any one know more wildcard type rules? Trying to kill off the annoying drive bys. I want to allow -L,-R's and my choice user type connections and block all else. Also does this filter only apply to incoming connections? Greg

3 2