February 2016 - App_rpt-users - lists.keekles.org

telemdefault=0
by gregory 11 Feb '16

11 Feb '16

Hi everyone, I set telemdefault to 0 so i wouldn't hear the node x connected to node x and was wondering if there was a way to still hear the connection status when manually asked for with *70.

1 0

Sound Possibility?
by Josh W4ZZK 10 Feb '16

10 Feb '16

Again, forgive me. New to this... I have ordered a couple of CM-108 USB FOBs for the AllStar Project. I am curious... with the ability to do some script editing to use a PC's LPT Printer Port as a "GPIO" for COR, PTT, etc., could the Integrated Sound Card on the Mobo (which is mostly AC97 Chips) be used for Audio In and Out of the Computer? Running DIAL. Thanks Josh W4ZZK

4 5

multicast node?
by David Krauss 09 Feb '16

09 Feb '16

Anyone know if it's possible to set up a multicast group as a node? so only one copy of the stream needs to be sent. I know this wouldn't work on the internet but would be very useful on a controlled network. I know asterisk has support for this via "paging" but I don't know how to implement in allstar. Sent from an iPhone 6

1 0

Asterisk Not in Debian ISO?
by Josh W4ZZK 08 Feb '16

08 Feb '16

Greetings Just getting started with Allstar... new user.... I have the DIAL installation completed (appears to be) but it seems that Asterisk has not made it into any directory on my machine. I understand there was supposed to be a popup to login to root, or something along that lie. Forgive me because I'm not in front of that box. Any advice? FYI the ISO I used is the one from AllStarLink site. I could have missed an important step somewhere. If so, forgive me for clogging the thread. Thanks for any advice 73 Josh W4ZZK NW Alabama

2 2

missed **** rx un-key
by dropbox＠digitalattack.org dropbox＠digitalattack.org 08 Feb '16

08 Feb '16

hardware: raspberry pi 2b with uri problem: raspberry pi 2b not seeing **** rx un-key if ptt released too quickly after final dtmf digit. I can repeat the issue by connecting to a node then: push ptt,*,7,1,release ptt. if i pause before releasing ptt then all is fine. if i release ptt immediately or same time as last dtmf digit then **** rx un-key is missed. i verified COD and did see the signal go from hi to low to the uri and didnt see the **** rx un-key in app rpt debug level 7. any suggestions? thanks, Gregory, KK6DOI

2 1

DMRGateway 2Way now in beta test.
by Steve Zingman 07 Feb '16

07 Feb '16

Starting today 2/7/2015 we have enabled 2 way communication between DMR and AllStar. We are running DMRGateway and ambe_audio on ASL Hub node 2100. This is using a NW Digital USB DV3000. All software is running on 2100. Node 2100 ASL is bridged to the Sandbox Master run by Cort, N0MJS and the K0USY Group. This master is for the purpose of experimentation. We are bridged to TS2 TG3120. For INAD, 73 Steve N4IRS and Mike N4IRR -- "It just works"

1 0

OT: Looking for a UK VoIP Provider for inexpensive calls to UK Mobile #'s
by Ramesh Dhami (VA3UV) 07 Feb '16

07 Feb '16

Hi All: I realize this is off-topic... but we have a huge knowledge base here that I would like to tap into. I need to setup a VoIP gateway (could be UK based or anywhere for that matter) that will allow me to make calls to UK mobile #'s inexpensively. Right now, my current provider is charging $0.30 - $0.40 US per minute. Surely there must be cheaper providers? I can setup an AST box in the UK if needed. I need to set this up urgently as I have a family emergency in the UK and will be flying out on Tuesday. Thanks! Ramesh, VA3UV

1 0

app_rpt and asterisk 13.x
by Waldek 06 Feb '16

06 Feb '16

Hi, I have use in our HamNET network Asterisk for VoIP version 13.7. I have question. It is possible or exist any patch or description how to add module app_rpt to asterisk v13.x ? 73 Waldek SP2ONG

4 4

echolink index servers
by ea8ee 06 Feb '16

06 Feb '16

for days I see that the echolink connects to the index of echolink but after a few minutes off from windows've tried and it works perfectly -- Enviado desde EA8EE red movil

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 83, Issue 43
by Chris HIll/K7AZ 03 Feb '16

03 Feb '16

Would removing R67 in the RTCM help? Sent from my dumb-smart DROID... app_rpt-users-request(a)ohnosec.org wrote: >Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > >You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of App_rpt-users digest..." > > >Today's Topics: > > 1. Re: Garmin GPS18x no longer compatible with RTCM (Joe Bennett) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Thu, 28 Jan 2016 20:01:20 -0600 >From: Joe Bennett <aprs(a)ka3nam.com> >To: app_rpt-users(a)ohnosec.org >Subject: Re: [App_rpt-users] Garmin GPS18x no longer compatible with > RTCM >Message-ID: > <CAD+1-48xN03rzJQNaedmJ3qZ8u6Jg87Qvq8ot44jPHWRAvVRww(a)mail.gmail.com> >Content-Type: text/plain; charset=UTF-8 > >I really doubt that a level converter will add enough timing skew to >amount to anything. The jitter you see on the internet will greatly >outweigh the skew of a level converter by orders of magnitude... > > >-Joe >KA3NAM > >On Tue, Jan 26, 2016 at 1:44 PM, James Cizek <james.m.cizek(a)gmail.com> wrote: >> Hi folks, >> >> Wanted to get this out to you before anyone else bought one thinking they >> would work (since this model is specifically called out in the RTCM docs). >> >> When using a GPS with a Micro-node RTCM for voting, you need to find one >> that has a 5 volt Pulse-per-second output. The Garmin lines that is >> recommended (GPS 18X, 18X lvc, etc...) >> NO LONGER do this! >> >> This is what I got back from Garmin: >> >> Mr. Cizek, >> >> >> >> I was just told there was a design change with the GPS 18x LVC. The PPS >> signal voltage is now 3V. This was something we were not told until today. >> We will be making the changes to the online Technical Specifications to >> reflect this change. >> >> I do apologize for the inconvenience. This was a change we were not informed >> of. >> >> >> So this line of GPS's will *NOT* work with an RTCM any longer. Talking to >> Mark at Micro-node, there is a voltage divider in the RTCM dropping the 5 >> volt to 3.3 volt to be compatible with the CPU. With only 3 volts on the >> incoming line, there isn't enough making it to the CPU to trigger a state >> change and you will get "PPS Timeout" errors and be unable to achieve GPS >> lock. >> >> >> I am not sure what kind of timing skew a level converter would introduce, so >> it's probably a better bet to just get a GPS that has a 5 volt line (Trimble >> Thunderbolt or the similar). >> >> >> There may be a possibility of removing or modifying the voltage divider >> inside as well, but without schematics, and unless you have SMD capable >> gear, it's unlikely that that is a good solution. >> >> >> Just wanted to let folks know so they don't repeat the brain damage I just >> went through figuring this out :) >> >> >> 73 >> >> James >> >> KI0KN >> >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to >> the bottom of the page. Enter your email address and press the "Unsubscribe >> or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. > > >------------------------------ > >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > >End of App_rpt-users Digest, Vol 83, Issue 43 >*********************************************

1 0