April 2016 - App_rpt-users - lists.keekles.org

ezstream 100% cpu
by Brent Weatherall 02 May '16

02 May '16

Hello, I've recently setup an allstar hub node and decided to stream it via broadcastify. Setup has gone well - I'm running debian, with the allstar node running without issue, as well as streaming now being delivered via Broadcastify. I've ran in to an issue where the ezstream process will occasionally pin at 100%. I can kill it fine, and asterisk gracefully resumes by creating a new working output stream. Has anyone else encountered this cpu pinned usage? Will I have to set up something to monitor the process to kill it, so it restarts? Thanks in advance for any suggestions VA3BFW - Brent

2 2

Zoiper not Transmitting
by ssedgwick 01 May '16

01 May '16

Hi all, I installed Zoiper on my Android phone and configured my node. When I connect using Zoiper, I can hear fine on the phone, but the “mute” button won’t allow me to transmit from the phone. I than installed Android IAXRPT on the same phone and it transmits and receives fine using the same setting that I used in Zoiper. As a final test, I installed Zoiper on another Android phone and had the same issue, mute button won’t allow me to transmit. Any idea’s? Thanks, Steve_WB8GRS

3 6

Node password problem
by Te Bussell 30 Apr '16

30 Apr '16

I have a silly problem logging into my node. There was a time when I had hacked into user name and password combinations of my own computers for fun, but I am more inclined to set up the node fresh. Should I take any particular precautions setting up the local Dial installation from scratch? I had a working node that was showing up in stats before that system failed. Cheers 73 William Bussell KB9WKR Sent from my iPad

1 1

Re: [App_rpt-users] simple udp interface
by Steve Zingman 29 Apr '16

29 Apr '16

Look at the usrp channel driver Sent via smoke signal (AT&T 4G LTE) -------- Original message -------- From: David Krauss <nx4y(a)verizon.net> Date: 04/29/2016 5:55 PM (GMT-05:00) To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] simple udp interface Is there a simple way to connect to asterisk/allstar via a udp socket ? I have a source of network audio that can source and receive raw PCM, 64K, 8 bit. I've looked at the rtpdir and outbound-only RTSP drivers but can't quite figure out how they really work, at least not quickly, and I was hoping someone already has this .. it needs to support COS and PTT signaling as well of course .. Sent from an iPhone 6 _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 2

simple udp interface
by David Krauss 29 Apr '16

29 Apr '16

Is there a simple way to connect to asterisk/allstar via a udp socket ? I have a source of network audio that can source and receive raw PCM, 64K, 8 bit. I've looked at the rtpdir and outbound-only RTSP drivers but can't quite figure out how they really work, at least not quickly, and I was hoping someone already has this .. it needs to support COS and PTT signaling as well of course .. Sent from an iPhone 6

1 0

Using URIx with RMSexpress under Windows 7 (64 Bit)
by Stephan Grensemann DG1BGS 29 Apr '16

29 Apr '16

Hi @ all, I want to use one of my URIx interface with RMSexpress under Windows 7 Professional 64 Bit. The sound in both directions is working fine but I wasn't able to figure out how I can configure RMSexpress to activate the PTT line, I can configure a com port where RTS or DTR can be used as the PTT line. I wonder if there is an additional driver or another trick to get access to the PTT line. Thank you very much for your help in advance. -- 73 & 55 de Stephan, DG1BGS

1 0

Quad Card Pin out
by David KE6UPI 29 Apr '16

29 Apr '16

Hello, Does anyone know and can post the pin out for the J45 on the Quad Card? I'am asking before I have to remove the card to see if it is printed on the board. Thanks, David KE6UPI

3 3

Source Updates
by Steve Mahler 29 Apr '16

29 Apr '16

Can anyone provide update information about the ACID Distribution? When I type the command (as found at http://docs.allstarlink.org/drupal/node/111) ... wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv gives [root@KF5VH-AS1 src]# wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv --2016-04-28 20:50:57-- http://x.allstarlink.org/svn-trunk.tar.gz Resolving x.allstarlink.org... 67.215.231.220 Connecting to x.allstarlink.org|67.215.231.220|:80... connected. HTTP request sent, awaiting response... 302 Moved Location: http://10.0.1.227:15871/cgi-bin/blockpage.cgi?ws-session=191443077 [following] --2016-04-28 20:50:57-- http://10.0.1.227:15871/cgi-bin/blockpage.cgi?ws-session=191443077 Connecting to 10.0.1.227:15871... failed: No route to host. gzip: stdin: unexpected end of file tar: Child returned status 1 tar: Error exit delayed from previous errors [root@KF5VH-AS1 src]# Thanks for any pointers, ...STeve - KF5VH

2 1

Custom remote base commands
by Skyler F 29 Apr '16

29 Apr '16

Does anybody know if it is possible to run shell commands from the functions-remote stanza? I have a custom shell script to switch to the proper channel based on how it is run. (ex. steer.sh 21) will steer my radio to channel 21. When I try to run a shell command from the functions-remote stanza, it does not seem to work, ex. 47 = cmd,asterisk-restart (this is the asterisk restart command on my particular distro) that command works if I put it in my regular node functions stanza, but not the remote base functions stanza. 73 Skyler

1 0

Cell Phone audio to loud on IAX connection
by larry 29 Apr '16

29 Apr '16

Can some one give me a hint of how to deal with incoming cell phone audio that overdrives remote Allstar IAX connections. I have a couple friends that use their cell phone with (Android-IAX app) to connect to my nodes when no RF access is available. Incoming phone audio via IAX is way strong coming from that source. Yet other Asterisk/Allstar connections are just fine with the simple tune setting used. Being fairly new to the cell phone world (about 6 months) I still have no clue (and neither do they) as to how to manipulate mic volume on a cell phone or even if you can. Anyone have any hints on how they handle this problem? Larry - N7FM

3 5