May 2016 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] usbfobs
by Skyler F 28 May '16

28 May '16

even better GPIO on the pi On Fri, May 27, 2016 at 6:47 PM, Skyler F <electricity440(a)gmail.com> wrote: > even better GPIO on the pi > > On Fri, May 27, 2016 at 6:46 PM, Steve Wright <info(a)meshnetworks.co.nz> > wrote: > >> >> I think we're on the wrong track with our fixation on cmedia hackable >> chipsets. It's too hard. >> >> Why can't we use one of the other DSP modules and some serial USB _TX >> signalling? >> >> >> >> On 28/05/16 04:00, Sam Skolfield <kj6qfs(a)gmail.com> wrote: >> >>> Please share any findings with the group, many of us are looking for them >>> too... >>> >>> On Thu, May 26, 2016 at 9:17 PM, Steve Wright <info(a)meshnetworks.co.nz> >>> wrote: >>> >>> Does anyone have a reliable source of modifiable USB audio devices? >>>> >>>> It's really really difficult to find hackable ones without buying one >>>> here >>>> and there... >>>> >>>> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll >> down to the bottom of the page. Enter your email address and press the >> "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > > > -- > Skyler Fennell > amsatnet.info > KDØWHB > electricity440(a)gmail.com > -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

1 0

DIAL_Netinstall_.ISO Isolinux hangs
by DuaneVT . 27 May '16

27 May '16

I downloaded Allstar Link's DIAL iso from their site. I used FreeISO to burn the ISO to a finalized CD. The computer has WinXP installed. Set BIOS to boot first from USB_CDROM. Rebooted First screen is black with "Isolinux 6.03 20150107 ETCD Copyright 1994-2014" Blinking cursor at start of next line. NOTHING MORE!!!! FIXES???? Thanks, Duane KA1LM

2 1

usbfobs
by Steve Wright 27 May '16

27 May '16

Does anyone have a reliable source of modifiable USB audio devices? It's really really difficult to find hackable ones without buying one here and there... Steve

2 1

IAXRPT with Windows 10 ?
by Luc Drolet VE2 LUQ 26 May '16

26 May '16

Hello everyone, I have a user who uses IAXRPT and since they bought the windows 10, they have connection problems, they are no longer able to connect on the repeater and sometimes they are able. This means intermitance since they are new with windows 10, is there anything to do to be able to have a connection? Did you ever have this type of problem? Thank you to you all for your comments, Luc VE2LUQ

4 3

Data Center Asterisk Crash..
by Loren Tedford 25 May '16

25 May '16

Greetings I had an episode again where the data center crashed on me for some reason.. Here is a pastebin of my /var/log/asterisk/messages file.. http://pastebin.com/sa9Wy3e9 I decided to ban an IP after looking at the logs however I still don't exactly see what caused the crash.. Here is a few lines before the major crash.. [May 25 03:30:05] NOTICE[4576] cdr.c: CDR simple logging enabled. [May 25 03:30:05] NOTICE[4576] dnsmgr.c: Managed DNS entries will be refreshed every 300 seconds. [May 25 03:30:05] NOTICE[4576] indications.c: Removed default indication country 'us' [May 25 03:30:05] WARNING[4576] chan_dahdi.c: Ignoring switchtype [May 25 03:30:05] WARNING[4576] chan_dahdi.c: Ignoring signalling [May 25 03:30:05] WARNING[4576] chan_dahdi.c: Ignoring rxwink [May 25 03:30:05] NOTICE[4576] chan_iax2.c: Ignoring bindport on reload [May 25 03:30:05] NOTICE[4576] chan_iax2.c: Ignoring bindaddr on reload [May 25 03:30:05] NOTICE[27342] app_rpt.c: Unable to open radio repeater configuration rpt.conf. Radio Repeater disabled. [May 25 03:30:05] NOTICE[27340] app_rpt.c: Unable to open radio repeater configuration rpt.conf. Radio Repeater disabled. [May 25 03:30:06] WARNING[27323] app_rpt.c: rpt_thread restarted on node 41715 [May 25 03:30:06] WARNING[27323] app_rpt.c: rpt_thread restarted on node 41834 In crontab -e I have this.. */15 * * * * sh /etc/asterisk/stopez.sh root@server:/var/log/asterisk# cat /etc/asterisk/stopez.sh #!/bin/bash kill -9 $(pgrep ezstream)& sleep 2s kill -9 pgrep ezstream sleep 2s /usr/sbin/asterisk -rx "module reload" The above script kills ezstream and reloads the module so far this has worked well for about 6 months now but I do get this periodic crash every 2 or 3 months.. Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://www.newwavesucks.com http://forum.newwavesucks.com

1 1

ISO files
by wayne 25 May '16

25 May '16

Bob is correct, first you must burn, not copy, the iso file to a CD. There are several programs for Linux and Windows that do this. Then put the newly burned CD into the drive and set the BIOS to boot from the CD first, not the hard disk. You should get a welcome screen in a minute or so with a warning that proceeding will permanently erase the hard disk and everything on it. It matters not what is there now, it will be replaced. Once the process starts, there is no going back. When the load finishes, you'll be asked for a "root" password. Make sure you write it down as there is little chance of recovering without starting over if you forget it. You should get a message to remove the CD and restart the machine, it will then load into Linux with everything ready to go. There is a firsttime script that runs and walks you through the basics of configuring a node. There is no fancy windows enviroment from this point on, everything is done at the command line. An understanding of the basics of Linux is handy. 73, Wayne W6IZK nodes 2099, 28146, 29454, 29629

1 0

dial-allstar-netinstall.iso
by DuaneVT . 25 May '16

25 May '16

I am trying to get the .iso files to load on a re-purposed hard drive machine. What is the minimum configuration of the computer hard drive? Such as: fully operating windows? fully operating Linux? newly installed formatted NTFS or FAT32 hard drive? Right now, I have a FAT32 formatted hard drive ready to go. Have I missed instructions an expected start configuration? Thanks, Duane KA1LM

2 1

Re: [App_rpt-users] RX Input Adjust Failed
by kk6ecm 24 May '16

24 May '16

I discovered app_rpt does not like ctcssfrom=no. Why? (I'm using DIAL). What am I missing? Thanks, Bob kk6ecm 73 -----Original Message----- From: kk6ecm [mailto:kk6ecm@gmail.com] Sent: Sunday, May 22, 2016 10:37 AM To: 'app_rpt-users(a)ohnosec.org' Subject: RX Input Adjust Failed What could cause the Error: RX Input Adjust Failed? DONE tries=12, setting=1000, meas=58, sqnoise=13 ERROR: RX INPUT ADJUST FAILED. No RF input to the radio. I'm attempting to setup a substitute receiver for testing, but am experiencing difficulty setting it up, and not wanting to make a switch to simpleusb, thus making the minimum number of changes. The substitute receiver (Yaesu FT-1500M) is detecting CTCSS, with USB COR out, and I'm using the speaker output. (see below conf file) Any thoughts? Thanks, Bob kk6ecm 73 from usbradio_tune... hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=107.2 rxctcssfreqs=107.2 txctcssfreqs=107.2 ;rxctcssoverride=0 ;carrierfrom=dsp carrierfrom=usb ;dsp ctcssfrom=no ;usbinvert rxdemod=speaker ;flat txprelim=no txlimonly=no txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=1 rxondelay=0 rxnoisefiltype=0 eeprom=0

3 8

RX Input Adjust Failed
by kk6ecm 22 May '16

22 May '16

What could cause the Error: RX Input Adjust Failed? DONE tries=12, setting=1000, meas=58, sqnoise=13 ERROR: RX INPUT ADJUST FAILED. No RF input to the radio. I'm attempting to setup a substitute receiver for testing, but am experiencing difficulty setting it up, and not wanting to make a switch to simpleusb, thus making the minimum number of changes. The substitute receiver (Yaesu FT-1500M) is detecting CTCSS, with USB COR out, and I'm using the speaker output. (see below conf file) Any thoughts? Thanks, Bob kk6ecm 73 from usbradio_tune... hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=107.2 rxctcssfreqs=107.2 txctcssfreqs=107.2 ;rxctcssoverride=0 ;carrierfrom=dsp carrierfrom=usb ;dsp ctcssfrom=no ;usbinvert rxdemod=speaker ;flat txprelim=no txlimonly=no txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=1 rxondelay=0 rxnoisefiltype=0 eeprom=0

1 0

LOCALPLAY vs. PLAYBACK
by Steve Mahler 22 May '16

22 May '16

Is there some way that PLAYBACK can be configured to act differently? Here is the setup ... 1) I run an IAX session to my Node 2) I run an ECHOLINK session to the same Node 3) I monitor the repeater output 4) I run the command ... /usr/sbin/asterisk -rvx "rpt localplay $NODE $WX/talkit" ... it plays only on the repeater output, which is expected. 5) I run the command ... /usr/sbin/asterisk -rvx "rpt playback $NODE $WX/announce" ... it plays only on the repeater output, which I do not expect. I was under the impression that PLAYBACK when out on every connection to the node. What am I missing? I wanted this version to speak on all links. ...STeve - KF5VH

2 1