September 2016 - App_rpt-users

Re: [App_rpt-users] App_rpt-users Digest, Vol 91, Issue 5
by Jeff Carrier 02 Sep '16

02 Sep '16

in rpt.conf under the [nodes] stanza you'd want somthing like this 1234 = radio@10.0.0.x:4569/1234,NONE 1235 = radio@10.0.0.x:4569/1235,NONE That would be the IP and node number of the remote node(s) You'd also want to comment out the register stuff in iax.conf so private nodes don't try to register with the public allstar server. On Fri, Sep 2, 2016 at 12:49 PM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: help with reverse patch setup (mike(a)midnighteng.com) > 2. Private nodes not connecting (N6GKJ Land) > 3. Re: Private nodes not connecting (Corey Dean) > 4. Re: Private nodes not connecting (Steve Zingman) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 2 Sep 2016 13:28:00 -0400 > From: mike(a)midnighteng.com > To: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] help with reverse patch setup > Message-ID: > <5a9b0d6ed092135ac8bc437002d93094.squirrel(a)webmail.midnighteng.com > > > Content-Type: text/plain;charset=iso-8859-1 > > > While not everyone has the same thing in mind when they use the words > REVERSE PHONE > PATCH, I'll gamble on your meaning/need... > > The last line where you are making the actual switch(connection) to the > radio > interface has to be defined in the same context it is being switch to. > So if it is playing back the digits as per your stanza and not making the > connection (dropping the call/falling through) , > The last line should look something like this... > > exten => 29283,n,Rpt,29283|P > > See notes on the "P" designation of documentation but > I think it is stated as "Phone Control Mode" > and there are other modes depending on use/need. > And the character just before it is a command separator, > don't confuse it with others. > > ...mike/kb8jnm > > > > > While attempting to create a reverse patch a incoming call returns the > following > > [Sep ??2 06:54:04] NOTICE[859]: chan_iax2.c:9471 socket_process: > Rejected connect > > attempt from 10.xxx.xxx.xxx, request '29883@radio-control' does not > exist > > > > > > > > extensions.conf is configured?? > > [radio??control]exten => 29883,1,Answerexten => > 29883,n,Playback,rpt/nodeexten => > > 29883,n,Playback,digits/2exten => 29883,n,Playback,digits/9exten => > > 29883,n,Playback,digits/8exten => 29883,n,Playback,digits/8exten => > > 29883,n,Playback,digits/3exten => 29883,n,Rpt,29883|D > > iax.conf is configured > > > > [N6LXX-IN]type=friendauth=md5secret=XXXXXXXXXXXXXXdisallow= > allallow=ulawallow=gsmcodecpriority=hostcontext=radio-controltransfer=no > > CLI> show dialplan returns (edited) > > > > [ Context 'radio??control' created by 'pbx_config' ]?? '29883' => ?? ?? > ?? ??1. > > Answer() ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? > [pbx_config]?? ?? ?? ?? > > ?? ?? ?? ?? ?? ?? 2. Playback(rpt/node) ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? > ?? > > [pbx_config]?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 3. Playback(digits/2) ?? ?? ?? > ?? ?? ?? > > ?? ?? ?? ?? ?? ?? [pbx_config]?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 4. > Playback(digits/9) > > ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? [pbx_config]?? ?? ?? ?? ?? ?? ?? ?? > ?? ?? 5. > > Playback(digits/8) ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? [pbx_config]?? ?? > ?? ?? ?? > > ?? ?? ?? ?? ?? 6. Playback(digits/8) ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? > > [pbx_config]?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 7. Playback(digits/3) ?? ?? ?? > ?? ?? ?? > > ?? ?? ?? ?? ?? ?? [pbx_config]?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 8. > Rpt(29883|D) ?? ?? > > ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? [pbx_config] > > > > CLI> dialplan show 29883@radio-controlThere is no existence of > 'radio-control' > > context > > Any help greatly appreciated > > Chris > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll > down to the > > bottom of the page. Enter your email address and press the "Unsubscribe > or edit > > options button" > > You do not need a password to unsubscribe, you can do it via email > confirmation. If > > you have trouble unsubscribing, please send a message to the list > detailing the > > problem. > > > > > ------------------------------ > > Message: 2 > Date: Fri, 2 Sep 2016 11:23:51 -0700 > From: N6GKJ Land <n6gkj1(a)gmail.com> > To: App RPT Users <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] Private nodes not connecting > Message-ID: > <CANr-_9p6m7i=entjW__WxVFz=9ieb_s3K9Vnax8TtRoJrfRZ=g@ > mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi guys, > > I have 2 RPI 3 servers running the latest N4IRS release. I have a private > node on each server. > > RPI3 #1 is 10.0.0.200 NODE 1000:4568 > RPI3 #2 is 10.0.0.201 NODE 1001:4569 > > Neither node can connect to the other. I am using the CLI inside the > asterisk program to manually connect using > rpt fun 1000 *31001 from server 1 > > or > > rpt fun 1001 *31000 from server 2 > > Listed here is how the scripts are defined. > > extensions.conf > RPI3 #1 > [globals] > HOMENPA = 209 ; change this to your Area Code > NODE = 1000 ; change this to your node number > > [default] > > exten => i,1,Hangup > > RPI3 #2 > [globals] > HOMENPA = 209 ; change this to your Area Code > NODE = 1001 ; change this to your node number > > [default] > > exten => i,1,Hangup > > [radio-secure] > exten => ${NODE},1,rpt,${NODE} > > [radio-secure] > exten => ${NODE},1,rpt,${NODE} > > > rpt.conf > > RPI3 #1 > rxchannel = dahdi/pseudo > > [nodes] > ; Note, if you are using automatic update for allstar link nodes, > ; no allstar link nodes should be defined here. Only place a definition > ; for your local nodes, and private (off of allstar link) nodes here. > > 1000 = radio(a)127.0.0.1 > <https://us-mg6.mail.yahoo.com/compose?to=radio@127.0.0.1>:4568/1000,NONE > ; This must be changed to your node number > 1001 = radio(a)10.0.0.201 > <https://us-mg6.mail.yahoo.com/compose?to=radio@10.0.0.201>:4569/1001,NONE > ; and iax port number if not the default > > RPI3 #2 > > rxchannel = dahdi/pseudo > > [nodes] > ; Note, if you are using automatic update for allstar link nodes, > ; no allstar link nodes should be defined here. Only place a definition > ; for your local nodes, and private (off of allstar link) nodes here. > > 1000 = radio(a)10.0.0.201 > <https://us-mg6.mail.yahoo.com/compose?to=radio@10.0.0.201>:4568/1000,NONE > ; This must be changed to your node number > 1001 = radio(a)127.0.0.1 > <https://us-mg6.mail.yahoo.com/compose?to=radio@127.0.0.1>:4569/1001,NONE > ; and iax port number if not the default > > > I am not having any results with this. I did not uncomment node register > line in iax.conf for either server > and also in rpt,conf I did not uncomment the status report lines > > I just simply want these two servers to talk to each other on the same lan > > The nodes in both of these servers are HUBS. > Anyone have any ideas I have over looked? > > Ron Simpson, > N6GKJ Amateur Radio > ................... > > > Have you ever noticed that when you are looking for something, > it is always found in the last place you look? > Ron Simpson, > N6GKJ.... > Amateur Radio >

1 0

help with reverse patch setup
by C B 02 Sep '16

02 Sep '16

While attempting to create a reverse patch a incoming call returns the following [Sep 2 06:54:04] NOTICE[859]: chan_iax2.c:9471 socket_process: Rejected connect attempt from 10.xxx.xxx.xxx, request '29883@radio-control' does not exist extensions.conf is configured [radiocontrol]exten => 29883,1,Answerexten => 29883,n,Playback,rpt/nodeexten => 29883,n,Playback,digits/2exten => 29883,n,Playback,digits/9exten => 29883,n,Playback,digits/8exten => 29883,n,Playback,digits/8exten => 29883,n,Playback,digits/3exten => 29883,n,Rpt,29883|D iax.conf is configured [N6LXX-IN]type=friendauth=md5secret=XXXXXXXXXXXXXXdisallow=allallow=ulawallow=gsmcodecpriority=hostcontext=radio-controltransfer=no CLI> show dialplan returns (edited) [ Context 'radiocontrol' created by 'pbx_config' ] '29883' => 1. Answer() [pbx_config] 2. Playback(rpt/node) [pbx_config] 3. Playback(digits/2) [pbx_config] 4. Playback(digits/9) [pbx_config] 5. Playback(digits/8) [pbx_config] 6. Playback(digits/8) [pbx_config] 7. Playback(digits/3) [pbx_config] 8. Rpt(29883|D) [pbx_config] CLI> dialplan show 29883@radio-controlThere is no existence of 'radio-control' context Any help greatly appreciated Chris

2 2

Re: [App_rpt-users] App_rpt-users Digest, Vol 91, Issue 2
by Steve Denbow 02 Sep '16

02 Sep '16

Thanks Bob, I'll download and give it a try! On Sep 1, 2016 8:23 PM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: New install does not ask for network settings (Bob Pyke) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 1 Sep 2016 17:23:04 -0700 > From: Bob Pyke <k6ecm1(a)gmail.com> > To: Steve Denbow <Kd8biw(a)hotmail.com> > Cc: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] New install does not ask for network > settings > Message-ID: <B905E7BC-298D-472E-B051-A86D8AD75AC6(a)gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Why not use DIAL. It is far better than ACID. The old server location now > has DIAL; download from allstarlink.org. If you kept your /etc/asterisk > folder with your old .config files, you are a step ahead. > > Thanks, > Bob > k6ecm > 73 > > Sent from iPad > > > > On Sep 1, 2016, at 4:49 PM, Steve Denbow <Kd8biw(a)hotmail.com> wrote: > > > > All, > > > > Reinstalling after a HDD crash, ACID (centos5) downloaded off the > website (burnt to DVD). The original install went without a hitch about a > year ago, however now it is not asking me for the network settings. As a > result, I cannot download the phase2.sh script. I'm a noob to Linux, your > help is appreciated. Thanks! > > > > On Aug 31, 2016 6:29 AM, <app_rpt-users-request(a)ohnosec.org> wrote: > > Send App_rpt-users mailing list submissions to > > app_rpt-users(a)ohnosec.org > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > or, via email, send a message with subject or body 'help' to > > app_rpt-users-request(a)ohnosec.org > > > > You can reach the person managing the list at > > app_rpt-users-owner(a)ohnosec.org > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of App_rpt-users digest..." > > > > > > Today's Topics: > > > > 1. Fw: cop command 2 and 3 disable enable (petem001(a)gmail.com) > > 2. Server IP target address (H Hugh Flint) > > 3. Re: Server IP target address (Bob Pyke) > > 4. Problems surrounding Dial with service asterisk stop and > > start along with restart (Loren Tedford) > > 5. Re: Problems surrounding Dial with service asterisk stop and > > start along with restart (Steve Zingman) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Tue, 30 Aug 2016 15:03:25 -0400 > > From: <petem001(a)gmail.com> > > To: "APP RPT" <app_rpt-users(a)ohnosec.org> > > Subject: [App_rpt-users] Fw: cop command 2 and 3 disable enable > > Message-ID: <FDFAAE59BBC9400A96C9F248BF16FCF8@PierreMartel> > > Content-Type: text/plain; charset="utf-8" > > > > Sent this on Sunday. No answer yet.. Is it that complex? > > > > From: Pierre Martel > > Sent: Sunday, August 28, 2016 7:13 AM > > To: APP RPT > > Subject: cop command 2 and 3 disable enable > > > > Hi I am working on a project to interface an allstar node on a multimode > digital repeater based on the MMDVM > > > > This would woould create a multimode fm,dtsar,fusion and dmr repeater > system. > > > > I know some people dont like that. but on a remote site where energy and > antenna deployement difficult and for place where installing multiple > repeater is price prohibitive, this is a nice solution. No mode is left > aside. but only one can be used at once. > > > > So in order to make this work I need to know how the cop 2 and 3 command > works. > > > > I want to use the event manager to send those 2 command when one input > from my URI is switching state. this will be connected to the MMDVM and it > will prevent the tx or false rx when the DVMDM is taking control of the > repeater. > > > > WHat happen to any audio received by the network when in disable mode? > IS it still present at the URI? Does the link that are present stay > connected or they disconnect? > > > > I need this so that I can figure out if it is more effective to use a > pair of small relay to cut the audio lines and ptt lines when the MMDVM is > active or doing it by software. > > > > thanks > > > > Pierre > > VE2PF > >

1 0

New install does not ask for network settings
by Steve Denbow 02 Sep '16

02 Sep '16

All, Reinstalling after a HDD crash, ACID (centos5) downloaded off the website (burnt to DVD). The original install went without a hitch about a year ago, however now it is not asking me for the network settings. As a result, I cannot download the phase2.sh script. I'm a noob to Linux, your help is appreciated. Thanks! On Aug 31, 2016 6:29 AM, <app_rpt-users-request(a)ohnosec.org> wrote: Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Fw: cop command 2 and 3 disable enable (petem001(a)gmail.com) 2. Server IP target address (H Hugh Flint) 3. Re: Server IP target address (Bob Pyke) 4. Problems surrounding Dial with service asterisk stop and start along with restart (Loren Tedford) 5. Re: Problems surrounding Dial with service asterisk stop and start along with restart (Steve Zingman) ---------------------------------------------------------------------- Message: 1 Date: Tue, 30 Aug 2016 15:03:25 -0400 From: <petem001(a)gmail.com> To: "APP RPT" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] Fw: cop command 2 and 3 disable enable Message-ID: <FDFAAE59BBC9400A96C9F248BF16FCF8@PierreMartel> Content-Type: text/plain; charset="utf-8" Sent this on Sunday. No answer yet.. Is it that complex? From: Pierre Martel Sent: Sunday, August 28, 2016 7:13 AM To: APP RPT Subject: cop command 2 and 3 disable enable Hi I am working on a project to interface an allstar node on a multimode digital repeater based on the MMDVM This would woould create a multimode fm,dtsar,fusion and dmr repeater system. I know some people dont like that. but on a remote site where energy and antenna deployement difficult and for place where installing multiple repeater is price prohibitive, this is a nice solution. No mode is left aside. but only one can be used at once. So in order to make this work I need to know how the cop 2 and 3 command works. I want to use the event manager to send those 2 command when one input from my URI is switching state. this will be connected to the MMDVM and it will prevent the tx or false rx when the DVMDM is taking control of the repeater. WHat happen to any audio received by the network when in disable mode? IS it still present at the URI? Does the link that are present stay connected or they disconnect? I need this so that I can figure out if it is more effective to use a pair of small relay to cut the audio lines and ptt lines when the MMDVM is active or doing it by software. thanks Pierre VE2PF

2 1