June 2017 - App_rpt-users - lists.keekles.org

ohnosec
by Steve Wright 05 Jun '17

05 Jun '17

What is the proper entry point for asterisk app_rpt? If ohnosec is it, then quite frankly it is completely incoherent - even for seasoned linux folks. thanks s

4 4

First Time Install with some issues..
by Steve Siesel 02 Jun '17

02 Jun '17

All, Here is what my problems are: 1. Getting the following in my asterisk trace: [Jun 1 21:33:22] WARNING[587] chan_iax2.c: REGISTER-LOG: registry rereqquest [Jun 1 21:34:12] WARNING[588] chan_iax2.c: REGISTER-LOG: Sending registration request for '46031' [Jun 1 21:34:12] WARNING[580] chan_iax2.c: REGISTER-LOG: registry rereqquest However my iax2 show registry shows: DMRLink*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 46031 47.203.114.127:1025 60 Registered 2. I have port forwarded both udp and tcp 4569 to the Allstar node. I have also added the following to iax.conf for Zopier access: [k4ksa] username=steve type=friend context=myphone host=dynamic auth=md5 secret=xxxxxxx disallow=all allow=ulaw allow=g726aal2 allow=gsm codecpriority=host transfer=no ;callerid=K4KSA I have also added the context to extensions.conf as well. This is what I am getting in the asterisk trace when trying to register (also getting error 29 from Zopier) [Jun 1 21:35:35] NOTICE[585] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127) [Jun 1 21:35:37] NOTICE[582] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127) [Jun 1 21:35:40] NOTICE[585] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127) 3. Telephone access from Allstar. When using the dial in telephone number trying to get voice or function access it times out with a busy signal. I did a tcpdump port 4569 and I can see the telephone service making It to the machine: 21:43:29.564494 IP seal.lambdatel.com.iax > DMRLink.home.iax: UDP, length 96 21:43:29.565075 IP DMRLink.home.iax > seal.lambdatel.com.iax: UDP, length 65 Using RAT RC1 Anyone have any thoughts to my three problems? Steve K4KSA

2 3

Re: [App_rpt-users] mini-pc recommendations for Allstar / Dial
by Mark Johnston 02 Jun '17

02 Jun '17

I don't know how often there would be a freeze up, *root@KC7DMF:~# uptime* * 19:22:06 up 19 days, 31 min, 1 user, load average: 0.05, 0.09, 0.12* *I believe this may address the issue, I added **kernel.panic = 20 * *to /etc/sysctl.conf* *I know it would kernel panic once in a great while, never did find exactly why, but this seems to keep it running.* *I also wrote a script when the network has packet loss, to restart...* "Got Root?" How many software engineers does it take to change a light bulb? *None. It's a hardware problem.* Unix is user friendly. It's just very particular about who it's friends are. WINDOWS: Will Install Needless Data On Whole System MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers. A ntennas P oorly P laced L acks E ngineering The best way to accelerate a computer running Windows is at 9.81 m/s². *"I get paid to support Windows, I use Linux to get work done."* On Thu, Jun 1, 2017 at 9:31 AM, Ken Alker <ka6ken(a)alker.net> wrote: > Thanks. Have you managed to avoid the freeze-up issue due to the clock > problems on certain Atom processors (Bay Trail, and possibly others) due to > a conflict with the kernel being used in the Dial release (apparently, a > CPU problem, but a problem nonetheless)? > > > --On Thursday, June 01, 2017 5:46 AM -0700 Mark Johnston < > markjohnston73(a)gmail.com> wrote: > > I have purchased a few using the Intel Atom CPU, they are not super fast, >> but I have had 4 URI's connected with no issues, and internet streaming >> as well on one node... they are inexpensive, and no fan on them, got 12V >> power supplies for them, mounted it all in a 1U rack, but there are >> plenty of other small form factor PC's like that if you just want a >> desktop style (mini) computer. Some are "Industrial" type, might look at >> what amazon has, etc... >> >> >> >> >> >> >> >> >> "Got Root?" >> >> >> How many software engineers does it take to change a light bulb? >> None. It's a hardware problem. >> >> >> >> >> Unix is user friendly. It's just very particular about who it's friends >> are. >> WINDOWS: Will Install Needless Data On Whole System >> MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools >> Teenagers. >> >> >> >> >> >> A ntennas >> P oorly >> P laced >> L acks >> E ngineering >> >> The best way to accelerate a computer running Windows is at 9.81 m/s². >> >> >> "I get paid to support Windows, I use Linux to get work done." >> >> >> >> On Thu, Jun 1, 2017 at 12:51 AM, Ken Alker <ka6ken(a)alker.net> wrote: >> >> Hello, >> >> I am brand new to this list and Allstar (although I have been using >> Asterisk for well over a decade). I would like to run three URIs off of >> one PC running Dial. The PC will also communicate with at least three >> RTCMs at other locations. I ASSuME, based on this requirement, that a >> mini-PC would be the best platform (and not a Rasberry Pi or other ARM >> based processor). Please correct me if this is wrong (as I'd love to >> get away with a super low power $35 computer). >> >> What mini-PC platforms have people successfully used (IOW, what mini-PCs >> would you suggest I look into)? I'd like something relatively >> inexpensive, low power, and with no moving parts (for a difficult to >> reach remote location at high elevation). >> >> I've been looking into the Qotom mini-PCs, however, many of them seem to >> be based on the J1900, and I have heard that the Intel "Bay Trail" >> processors (of which the J1900 is one) have some clock issues due to a >> conflict with the (Debian) kernel being used in the Dial/Allstar >> project. I don't know if newer releases of the processor have fixed >> this, or if it applies to every single Bay Trail processor ever >> produced. Perhaps someone can expound on this for me, as well. >> >> Thank you! >> >> Ken Alker >> KA6KEN >> http://www.impulse.net >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> >> >> > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/c > gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > the page. Enter your email address and press the "Unsubscribe or edit > options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. >

1 0

Re: [App_rpt-users] mini-pc recommendations for Allstar / Dial
by Mark Johnston 01 Jun '17

01 Jun '17

I have purchased a few using the Intel Atom CPU, they are not super fast, but I have had 4 URI's connected with no issues, and internet streaming as well on one node... they are inexpensive, and no fan on them, got 12V power supplies for them, mounted it all in a 1U rack, but there are plenty of other small form factor PC's like that if you just want a desktop style (mini) computer. Some are "Industrial" type, might look at what amazon has, etc... "Got Root?" How many software engineers does it take to change a light bulb? *None. It's a hardware problem.* Unix is user friendly. It's just very particular about who it's friends are. WINDOWS: Will Install Needless Data On Whole System MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers. A ntennas P oorly P laced L acks E ngineering The best way to accelerate a computer running Windows is at 9.81 m/s². *"I get paid to support Windows, I use Linux to get work done."* On Thu, Jun 1, 2017 at 12:51 AM, Ken Alker <ka6ken(a)alker.net> wrote: > Hello, > > I am brand new to this list and Allstar (although I have been using > Asterisk for well over a decade). I would like to run three URIs off of > one PC running Dial. The PC will also communicate with at least three > RTCMs at other locations. I ASSuME, based on this requirement, that a > mini-PC would be the best platform (and not a Rasberry Pi or other ARM > based processor). Please correct me if this is wrong (as I'd love to get > away with a super low power $35 computer). > > What mini-PC platforms have people successfully used (IOW, what mini-PCs > would you suggest I look into)? I'd like something relatively inexpensive, > low power, and with no moving parts (for a difficult to reach remote > location at high elevation). > > I've been looking into the Qotom mini-PCs, however, many of them seem to > be based on the J1900, and I have heard that the Intel "Bay Trail" > processors (of which the J1900 is one) have some clock issues due to a > conflict with the (Debian) kernel being used in the Dial/Allstar project. > I don't know if newer releases of the processor have fixed this, or if it > applies to every single Bay Trail processor ever produced. Perhaps someone > can expound on this for me, as well. > > Thank you! > > Ken Alker > KA6KEN > http://www.impulse.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/c > gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > the page. Enter your email address and press the "Unsubscribe or edit > options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem.

2 1

mini-pc recommendations for Allstar / Dial
by Ken Alker 01 Jun '17

01 Jun '17

Hello, I am brand new to this list and Allstar (although I have been using Asterisk for well over a decade). I would like to run three URIs off of one PC running Dial. The PC will also communicate with at least three RTCMs at other locations. I ASSuME, based on this requirement, that a mini-PC would be the best platform (and not a Rasberry Pi or other ARM based processor). Please correct me if this is wrong (as I'd love to get away with a super low power $35 computer). What mini-PC platforms have people successfully used (IOW, what mini-PCs would you suggest I look into)? I'd like something relatively inexpensive, low power, and with no moving parts (for a difficult to reach remote location at high elevation). I've been looking into the Qotom mini-PCs, however, many of them seem to be based on the J1900, and I have heard that the Intel "Bay Trail" processors (of which the J1900 is one) have some clock issues due to a conflict with the (Debian) kernel being used in the Dial/Allstar project. I don't know if newer releases of the processor have fixed this, or if it applies to every single Bay Trail processor ever produced. Perhaps someone can expound on this for me, as well. Thank you! Ken Alker KA6KEN http://www.impulse.net

1 0