September 2017 - App_rpt-users

Registration Rejected.
by David Shaw 18 Sep '17

18 Sep '17

Well I'm lost. I feel rejected. 192.168.11.254 is my router. (Mikrotik) I be honest. I haven't had to login to the node for a long time. Like a very long time. It's still running Limey Linux for crying out loud. If this is a simple fix great. If not, I'll be changing over to a RasPi 2or3 sometime next month. chan_iax2.c:6839 register_verify: No registration for peer '2064' (from 192.168.11.254) chan_iax2.c:6839 register_verify: No registration for peer '2063' (from 192.168.11.254) chan_iax2.c:6839 register_verify: No registration for peer '2064' (from 192.168.11.254) chan_iax2.c:6839 register_verify: No registration for peer '2063' (from 192.168.11.254) chan_iax2.c:9712 socket_process: Registration of '2064' rejected: 'Registration Refused' from: '67.215.233.178' chan_iax2.c:9712 socket_process: Registration of '2063' rejected: 'Registration Refused' from: '67.215.233.178' 2063 = radio@127.0.0.1:4569/2063,NONE ; This must be changed to your node number 2064 = radio@127.0.0.1:4569/2064,NONE,y bindport=4569 register=2063:XXX946@register.allstarlink.org register=2064:XXX615@register.allstarlink.org -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

2 3

Allstar Nodes in Kaanapali / Lahaina - Maui
by Ramesh Dhami 17 Sep '17

17 Sep '17

Hi All: Planning a trip to Maui this week! Interested in hearing from Allstar node owners in Kaanapali / Lahaina. Also looking for recommendations for a condo rental, etc. Mahalo! Ramesh, VA3UV Allstar node 27919

1 0

Calling into node via AllstarLink Portal
by Grady Anderson 17 Sep '17

17 Sep '17

Hello all. I have recently done clean installs on 2 nodes that I manage. Before I loaded the latest version of RPi2-3, I could call into both of these nodes and issue dtmf commands, talk, etc. I have either done something or not done something on this latest install which is preventing me from calling into them. It would be helpful if someone could explain what the chain of events is when someone attempts to call into a node via the telephone portal ie... once the portal accepts the call, what is the sequence of events, what modules are used, what information is passed, what happens in apt_rpt once the node gets the call and so on. It would also be immediately useful if someone could explain what settings in what conf files need to be changed to allow those incoming calls through the portal. I do use this functionality quite often since I do not have physical access to the nodes. I appreciate any information you fine folks could offer!

1 0

RTCM Inbound (Eth Rx) packet out of bounds
by Hayden Honeywood 15 Sep '17

15 Sep '17

Thanks Tim, I'll change some more values, save and reboot. The ping tests were done with using the Asterisk command line. We did a reboot of the remote end that our router is connected to at the site, and it came good for a little while. Pings are good, but they drop on average 4 in every 100 or so... But no great spikes indicating congestion. All this is over the internet by the way. My Pi is running at 100MBps into the router, and the RTCM is 10Mbps half duplex.

1 0

RTCM Inbound (Eth Rx) packet out of bounds
by Hayden Honeywood 14 Sep '17

14 Sep '17

Just hooked up my second site to my VOTER system. The main controller is a Raspberry Pi 3. Port forwarded 667, connection seems to go up fine. Getting the following error though - Inbound (Eth Rx) packet out of bounds by: 16000 PING (Grey.Mt): Packets tx: 100, rx: 97, oos: 0, Avg.: 37.598 ms PING (Grey.Mt): Worst: 40 ms, Best: 37 ms, 97.0% Packets successfully received No idea why I'm getting packet loss. Rebooted routers... bulfen is 120 and TX Buffer length is 480. I've tried 960, right up to 1600. Site has high RF TV transmitters, so maybe getting issues with the GPS there? I can't see it dropping out.

3 2

nws weather script
by jimmy keffer 12 Sep '17

12 Sep '17

will the weather script read full nws forecast or is it alerts only jimmy ka3vgm

2 1

Desense (Echo) on RTCM
by Hayden Honeywood 12 Sep '17

12 Sep '17

Hi All, Gotten around to finally installing one of my VOTER boards (RTCM) to Site 1. All tested on the bench - the only thing I did not test was duplexing on the bench as I had no spare duplexers. Installed to the site - nothing changed from the duplexer patch cables onwards to the antenna. Now I have what I assume is a huge amount of desense. The previous repeater installed was the same model radio and worked fine. Disabled CTCSS encoding as the repeater would talk to itself echoing over and over. Attached is a sample audio recording, you can hear the growl of the audio delay in the system. I've been waiting to get back to the site (snow and time permitting), but in the meantime thought I'd post here to see if anyone has had any similar experience with desense and the RTCM's talking to themselves.... My second unit works on the bench, duplexing into a dummy load and antenna fine. Measuring desense is tricky as the radios have been modified so they don't have any external audio connections anymore, so the lid has to be popped to connect the service monitor. Next stop is to test the system into a dummy load at the site, if that fails, then remove the system and replace with Site 2 equipment and test. If it duplexs fine into a dummy load and not into a antenna, has anyone had issues with RF maybe coming back down the GPS antenna cable? That is the only physical external connection near the antenna we've changed from the previous system. Regards Hayden VK7HH

2 2

Re: [App_rpt-users] log2ram ?
by Steve Zingman 07 Sep '17

07 Sep '17

systemctl disable log2ram systemctl stop log2ram Steve, N4IRS Sent via smoke signal (AT&T) On Sep 7, 2017 7:04 PM, jimmy keffer <horsezip(a)earthlink.net> wrote: my log to ram var/log 48neg and is full how cam i make var/kig use the harddisk and not goto ram i have a 1tb dusk so space is not a problem jimmy ka3vgm _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

log2ram ?
by jimmy keffer 07 Sep '17

07 Sep '17

my log to ram var/log 48neg and is full how cam i make var/kig use the harddisk and not goto ram i have a 1tb dusk so space is not a problem jimmy ka3vgm

1 0

AllStar Registration Server Down
by Skyler F 07 Sep '17

07 Sep '17

Nodes were working fine this morning but the registration server seems to be down now. I am getting this error on all nodes: Anybody else: asterisk -vvvr iax2 show registry: Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 45499 <Unregistered> 60 Timeout Skyler KD0WHB

2 2