- App_rpt-users - lists.keekles.org

Allmon2
by ARS W5OMR 30 Sep '21

30 Sep '21

So, I followed the instructions at https://wiki.allstarlink.org/wiki/Allmon2_Install Got it all done, and tried to open up, in my local browser, 192.168.x.x/allmon2 (correct address inserted) and I get the error code of "Resource Not Found" allmon.ini.php root@repeater:/var/www/html/allmon2# less allmon.ini.php <?php [Off-site Link] url=http://google.com [29655] host=my.127.0.0.1:5038 user=admin passwd=llcgi nomenu=yes hideNodeURL=yes ;[501] ;system=System1 ;host=192.168.0.3:5038 ;user=admin ;passwd=password2 ;nomenu=yes ;hideNodeURL=yes ;[502] ;system=System1 ;host=my.address.com:5038 ;user=admin ;passwd=password2 ;nomenu=yes ;hideNodeURL=yes ;[2000] ;system=System2 ;host=my.address.com:5037 ;user=admin ;passwd=password2 ;[2000 RTCM] ;system=System2 ;rtcmnode=2000 ;[Grouped Nodes] ;nodes=500,501,2000 ;[2 RTCMs] ;system=System2 ;rtcmnode=2000,2001 ?> (END) After reading the README file, I see that Apache needs to be installed and running. Is there enough room on my RPI3b's SD card for apache? root@repeater:# df -h Filesystem Size Used Avail Use% Mounted on /dev/root 30G 2.4G 26G 9% / devtmpfs 459M 0 459M 0% /dev tmpfs 463M 0 463M 0% /dev/shm tmpfs 463M 47M 417M 11% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 463M 0 463M 0% /sys/fs/cgroup /dev/mmcblk0p1 99M 20M 79M 20% /boot log2ram 40M 40M 0 100% /var/log yeah... looks like. So, I'm guessing that's my next step? Thoughts? -- 73 = Best Regards, -Geoff/W5OMR (29655)

2 1

Status of PTTlink?
by PeteM 25 Aug '21

25 Aug '21

I was wondering what the current status is of PTTlink? Are there any plans to rejoin Allstarlink?

2 1

List reopened
by PTTLink Admin 12 Aug '21

12 Aug '21

This mailing list has been reopened. This is the only warning all subscribers will recieve to keep the discussions on here civil, even if you are in disagreement. Violation of the rules will result in moderation the first time, and list removal the second.

2 1

ID without PL?
by Kyle Y 30 May '21

30 May '21

Hello all, Is anyone on the list sending their ID without PL? I've got a GPIO wired up for the purpose but don't see an easy way to drop that in. I'd appreciate any suggestions. Thanks. 73 Kyle K0KN

1 0

Voter boards and PICs still available
by Joe Moskalski 04 May '21

04 May '21

Just letting anyone who is interested know, I still have the VOTER board PCB's and pre-programmed PIC microcontrollers for them still available from the last batch I ordered. I also have my own version of the PCGM available as well. If anyone is interested, please let me know. -Joe KC2IRV P.S Also, to all those who did purchase these from me, I haven't heard any feedback, I hope everyone was happy with what they received.

1 0

History of "ASL Registration Code"
by Stacy 25 Apr '21

25 Apr '21

The story behind the latest posting from Rob Vella KK9ROB, regarding the "ASL Registration Code" post. Posted here to be a matter of record. -------------------------- The concept for the new registration was originally the idea of Jason Kendall VE3YCA, however Jason was not able to spare cycles to work on the new code as his job and life keeps him gainfully employed. Around September 2020, when Rob joined in a discussion on development with several of us, registration came up as well as the desire to replace the Asterisk 13 based registration servers, since they were still running a hack that was done to chan_iax by me (with Tom Hayward KD7LXL doing a minor initial mod that led to the start of the complete hack). On 11 September 2020, Rob sent me a DM asking about ASL registration and said "I've done a fair bit of socket programming for a work project. You think it would be a worthwhile venture to try to code an IAX server? I was thinking about it earlier. Sniffed some packets, got a familiar with the registration flow. It's only a few packets that are sent and looks pretty straightforward." "It should be fairly straightforward to do so. There's only 5-7 total packets to do a registration" I told him he could and that there was an RFC for the protocol. Then on 13 September from Rob: "won't be able to make the morning meeting but wanted to let you know that I was successful in getting an IAX server setup. have the full registration flow working (without verifying password, just the packets) through UDP. going to work more on it tomorrow to get is authenticating against real data." "just need to do some refactoring. assuming that it's going to hit an HTTP endpoint for registration, as Jason expressed, so i setup something really basic to just authenticate or reject. i'll be implementing that packet tomorrow." "so far it's super fast. less than 15ms to do a full registration. excited to see where it goes." (of course there is more, like on 15 September the DM about "i implemented client functionality, so as a validation measure, i could literally forward the reaffic back out to a real reg server" or the reply by me asking if this was in pyton "no. its in NodeJS. send the hate. lol" Jason and Rob did quite a bit of testing on systems that were setup just for this purpose. Rob even requested and was provided the packet captures from the live registration servers and said it helped a lot. Rob's front end was talking to the back end API that Jason wrote in Python. In fact, both pieces of code still exist in the now pttlink registration servers and were running on the ASL servers. Unfortunately, there was a bug in the IAXjs code that had to be addressed, and Jason was able to do a work around to fix it. And for the record: Jason actually published an updated version of the Python code about 3-4 months ago here: https://github.com/apprpt-central https://github.com/Apprpt-Central/pyIAX-Register

3 4

chan_echolink.c: Cannot find DB entry for IP addr / Database remains empty
by Toussaint OTTAVI 15 Apr '21

15 Apr '21

Hi, A few weeks ago, the following problem appeared on our chan_echolink access : - The client gets an "Un-Authorized" message - The server log shows : ERROR[662]: chan_echolink.c:2578 do_new_call: Cannot find DB entry for IP addr Other troubleshooting steps : - The node TK5KP-R appears as online at https://echolink.org/links.jsp - When viewing the database with "echolink dbdump", it is always empty. When looking at the logs, I do not see any attempt to download database updates. - Of course, DNS resolution is good, and connection to Internet works. - Server reboots automatically every night Then, something seems to go wrong with database download, but I have no idea about how to troubleshoot that... Thank you in advance. 73 de TK1BI

1 0

Repository gone?
by PeteM 21 Mar '21

21 Mar '21

What happened to the github repository?

1 0

Allstar VOTER board bare PCB's
by Joe Moskalski 18 Mar '21

18 Mar '21

I just wanted to offer this to anyone if they are interested, I am ordering a batch of VOTER board PCB's to build a bunch of the voter boards for a project and to have a few spares. If anyone would like a PCB to build one yourself please email me at kc2irv(a)gmail.com. I will also offer pre programmed PIC microcontrollers if you require one. Just wanted to make it easier for anyone who wanted to build and play with this board for themselves.

2 1

Moderation
by PTTLink Admin 11 Mar '21

11 Mar '21

List moderation has been turned back on. It was turned off earlier for a brief period of time due what was deemed an acceptable cooling off period. A recent post has made it clear that modeartion needs to be truned back on. All posts will be held for review until furhter notice.

1 0