- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Files listed, zero bytes... (Jim Aspinwall)
by Jim Aspinwall 04 Apr '16

04 Apr '16

I should know better - the only way to access the file system is with the SD card running... fine... Still, the not accepting file transfers and not spitting errors is odd. ---------------------------------------------------------------------- 1. Files listed, zero bytes... (Jim Aspinwall) Message: 1 Date: Mon, 4 Apr 2016 20:28:57 +0000 (UTC) From: Jim Aspinwall <no1pc(a)yahoo.com> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] Files listed, zero bytes... Message-ID: <1025120046.2795427.1459801737866.JavaMail.yahoo(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Yesterday I made a backup copy of my node (Pi 2 based) in preparation for some control/script changes. Later yesterday the control/script changes were made, but I did not have a chance to review or test until this morning. The method of the copying was through BitVise SFTP, selecting then dragging the highlighted files/folders to a local folder on my PC. ? It appears that those files actually did get copied this morning. Only a bit later did I try testing the control/script changes on the node and a few worked as expected, a few others unsure. I went to look at the files changed to see if I had the command (DTMF) strings correct and notice in the SFTP window that MANY files on the node now show zero bytes. ? OMG!?!?! ?How/what zero'd out files that I was merely copying? I tried to SFTP a couple of the files back into the node and while I see what appears to be a successful copy status, the file still shows zero bytes.? Before I down the node and put the SD card in the PC to view the file system there, or in my Mac... and try to copy them back from the supposedly successful backup. Has anyone got a clue about such an event?

1 0

Re: [App_rpt-users] Difference between Dial and Acid
by John Griffith 04 Apr '16

04 Apr '16

Thank you Dave. Once you get here, ring me up and we’ll have you and wife over for dinner. I’ll have my tower up by then and you’ll be able to hit my repeater from Queen Creek. From: Dave P [mailto:tdydave@gmail.com] Sent: Monday, April 04, 2016 8:18 AM To: John Griffith <jcarl.griffith(a)gmail.com> Subject: Re: [App_rpt-users] Difference between Dial and Acid Hey John, I have been running DIAL for at least 6 months and it is a definite upgrade from ACID. It is built to operate the old Pentium4 and the newer architecture Dual Core processor PC's. It runs off of Debian and uses simpleUSB. Overall solid product. I've not had an issue with it. Good deal your running the WINsystem off your repeater in Mesa. I am getting ready to move to Queens Creek as I'm in the process of applying for a home loan with Ryland homes and hope to move in November. I plan to apply for a 440 repeater frequency to run my Allstarlink network. Hawaii/Mainland Allstarlink network. I am also running my other nodes in a DataCenter in San Francisco and it is working great. What is your repeater frequency? Look forward to further dialogue as I plan to move my family to Arizona. My wife is from Thatcher and I'm from Hawaii. We met at BYU-Hawaii. 73 and aloha Dave AH6OD 28508/28387 On Mon, Apr 4, 2016 at 7:28 PM, John Griffith <jcarl.griffith(a)gmail.com <mailto:jcarl.griffith@gmail.com> > wrote: I’m sure this has been discussed before, but I was unable to find on Google search a simple list of features that Dial will get me over my current Acid setup. Can I get an opinion of whether it’s advantageous to migrate to Dial? N7OKN John Griffith Mesa, AZ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Re: [App_rpt-users] Understanding ilink,9 usage
by Brett Friermood 04 Apr '16

04 Apr '16

Thanks, Steve. I realized I only replied to you rather than reply all, so I'm copying it back to the group. Brett On Mon, Apr 4, 2016 at 4:20 PM, Steve Zingman <szingman(a)msgstor.com> wrote: > It is seen on the console at the other end. I've seen it used to announce > nodes connecting and disconnecting. I'll let Tim (Allmon2) comment if the > message could be visible on Allmon2. Could the message be grabbed up by a > script? Don't know. I'll let someone who may have done it comment. > > Here is a chance to play and learn. > > 73, Steve N4IRS > > I know that the destination node number can be passed from DTMF but I > could not get the message to pass. Of course, the message in that case > would be numeric. > > > On 04/04/2016 04:55 PM, Brett Friermood wrote: > > How is this message "seen" or otherwise received on the other end? Is this > something that could be used for out of band signalling between scripts on > the respective nodes, or is it's purpose mainly for testing connections? > > Brett KQ9N > >

1 0

Files listed, zero bytes...
by Jim Aspinwall 04 Apr '16

04 Apr '16

Yesterday I made a backup copy of my node (Pi 2 based) in preparation for some control/script changes. Later yesterday the control/script changes were made, but I did not have a chance to review or test until this morning. The method of the copying was through BitVise SFTP, selecting then dragging the highlighted files/folders to a local folder on my PC. It appears that those files actually did get copied this morning. Only a bit later did I try testing the control/script changes on the node and a few worked as expected, a few others unsure. I went to look at the files changed to see if I had the command (DTMF) strings correct and notice in the SFTP window that MANY files on the node now show zero bytes. OMG!?!?! How/what zero'd out files that I was merely copying? I tried to SFTP a couple of the files back into the node and while I see what appears to be a successful copy status, the file still shows zero bytes. Before I down the node and put the SD card in the PC to view the file system there, or in my Mac... and try to copy them back from the supposedly successful backup. Has anyone got a clue about such an event?

1 0

RANGER links?
by Stephen - K1LNX 04 Apr '16

04 Apr '16

Hi guys... been away from AllStar for a while and my how things have progressed! I'm re-acclimating myself with the old and new features and I ran across this in the rpt.conf file: 810 = ilink,10 ; Disconnect all RANGER links (except permalinks) What exactly is this? tnx Stephen K1LNX

3 3

Audio has no bass...
by Bryan Taylor 04 Apr '16

04 Apr '16

Curious as to if there are any settings in the dial setup that would make the sound have more bass, I have 2 nodes using icom icf-f121 Radios and one using a Motorola gm300 and they all sound fine, the other node is using an old Marconi Marcom vi and the audio it transmits back to the repeater is very tinny... The audio it sends out over the network is really nice. Just wondering if there are different settings for different style audio Thanks Bryan Vo1mxz Sent from my iPhone 6

4 4

2 nodes, 1 uri
by Greg 04 Apr '16

04 Apr '16

Did I once read I could configure 2 nodes to function with 1 uri? I'm not sure where to find info on that. Thanks

1 0

Dial Question
by Steve Agee 04 Apr '16

04 Apr '16

If I put the line.... preemphasis=yes in simpleusb.conf in Dial, will it work? N5ZUA

2 1

Reverse AutoPatch
by JJC 04 Apr '16

04 Apr '16

I have scoured the internet to find documentation about reverse autopatch but have had no luck. I have been able to get autopatch working without a problem and have had _limited_ success in getting allstar(dial) to answer. I was able to get allstar to answer and allow me to run DTMF with the following, but really all that I want is reverse autopatch or both.... If I make any real changes to the stanza in extensions.conf I get an error like: Using INVITE request as basis request - 1939985154(a)198.199.84.66 Found no matching peer or user for '198.199.84.66:5060' [Mar 30 16:15:32] NOTICE[575]: chan_sip.c:14351 handle_request_invite: Failed to authenticate user "Caller ID Strings..." <sip.conf> [general] allowguest = no match_auth_username=yes register=REDACTED:XXXXXX@gvgw.simonics.com/2230 context = default allowoverlap = no ; Disable overlap dialing support. (Default is yes) bindport = 5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr = 0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup = yes ; Enable DNS SRV lookups on outbound calls [GV17193576518] type=friend autocreatepeer=yes insecure=port,invite username=REDACTED secret=XXXXXXX host=gvgw.simonics.com qualify=no ;permit=0.0.0.0/0.0.0.0 context=custom-gv-answer <extensions.conf> [custom-gv-answer] exten => 2230,1,Answer() exten => 2230,n,Playback(rpt/node) exten => 2230,n,Saydigits(${EXTEN:1})

3 23

DIAL-RPi-2: Echolink drops off. Why?
by kk6ecm 04 Apr '16

04 Apr '16

On our DIAL RPI-2 build, Echolink seems to drop offline... not registered, even though Allstar is registered; a restart of asterisk, and all is well again. Any ideas why? Thanks, Bob kk6ecm

1 0