- App_rpt-users - lists.keekles.org

Documentation Question
by Steve Mahler 18 Feb '16

18 Feb '16

Has anyone generated a document that outlines ... 1) the full list of COP comands, the list of parameters for each, and how they interact 2) the full list of ILINK commands, the list of parameters for each, and how they interact 3) the steps necessary to build custom macros (for an RF or IAX or SIP user) If the document doesn't exist, does anyone have a fancy but well documented set of CONF files that they would be willing to share. Or, any other useful pointers. Thanks, ...STeve - KF5VH

4 4

Courtesy tone
by Bryan Taylor 17 Feb '16

17 Feb '16

Hi all, I am wondering if this scenario is possible: Have an icom radio at home connected to pc running Allstar. This radio is on same frequency as local repeater. The system works great runs great and sounds awesome. Wondering about courtesy tones... Can I have a courtesy tone that fires only when the traffic is from the local repeater, no courtesy tone from network traffic all the while having no connect/disconnect announcements. Basically the only time I ever want to hear the Allstar software make any noise is when someone keys up the local repeater and the system sends back a courtesy tone to them. Other than that I want the node to be totally silent. Is this possible? I can get the tones to work but I get the connect/disconnect announcements. Thanks Bryan Sent from my iPhone 6

1 0

Limey
by David KE6UPI 16 Feb '16

16 Feb '16

Is Limey still alive?? KE6UPI

2 1

Hub vs Node?
by Jim Aspinwall 16 Feb '16

16 Feb '16

What if anything are the specific differences between a single node (tied to simplex, repeater, Pi box and headset...) that can presumably only accept one in-bound call/connect, and a hub, to which many can connect and bridge through/over? Given a certain amount of specialization or purpose/interest-built hubs I am interested in having a purpose-built hub for a few systems and users not exclusive but so as not to impose on others' hubs and traffic. What does it take to do this?

4 5

Installing DIAL on Debian 8 x64 ?
by Toussaint OTTAVI 16 Feb '16

16 Feb '16

Hi, I'd like to install DIAL on a Debian 8.3, in a virtual machine. My Debian is x64. Can I safely run the x86 install script here : https://github.com/N4IRS/AllStar/platforms/x86/jessie or should I necessarly reinstall a x86 Debian before ? Thank you in advance. 73 de TK1BI

2 3

RX/TX on DIAL
by Josh W4ZZK 15 Feb '16

15 Feb '16

Evening all Would appreciate a little insight to an issue here. Perhaps this is very simple. Have the DIAL box pretty much "good to go" with the USB FOB, cabling from a M120 Motorola, within the hood of a DB25 is a 4n33 Opto for keying the rig with PP2 (and using PP10 as COR). To test some abilities, I've gotten Echolink enabled on the node, and have RX audio from the radio through the computer to echolink, as well as over the phone to the Portal. This part seems to be just fine. Unfortunately, the computer is not sending signal to TX. I have "simpleusb.conf" configured with: pp2=ptt pp10=cor Have I missed something simple in addressing the machine to use pp2 and pp10 for rig control, rather than USB FOBs onboard points? Again, this is new... bear with me as I learn the ropes! Thanks! Josh, W4ZZK

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 84, Issue 17
by Jim Aspinwall 15 Feb '16

15 Feb '16

Excellent - thanks. BW and hardware won't be an issue where I think this would go. Today's Topics: 1. Hub vs Node? (Jim Aspinwall) 2. Re: Hub vs Node? (Steve Zingman) 3. Re: Hub vs Node? (Kevin Custer) ---------------------------------------------------------------------- Message: 1 Date: Sun, 14 Feb 2016 22:24:49 +0000 (UTC) From: Jim Aspinwall <no1pc(a)yahoo.com> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] Hub vs Node? Message-ID: <1373181799.4087456.1455488689812.JavaMail.yahoo(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" What if anything are the specific differences between a single node (tied to simplex, repeater, Pi box and headset...) that can presumably only accept one in-bound call/connect, and a hub, to which many can connect and bridge through/over? Given a certain amount of specialization or purpose/interest-built hubs I am interested in having a purpose-built hub for a few systems and users not exclusive but so as not to impose on others' hubs and traffic. What does it take to do this?

1 0

Trimble Gone Mad
by Tim Sawyer 14 Feb '16

14 Feb '16

We had an episode of 3 Trimble GPS units showing intermittent loss of lock. The problem started at zero hours Zulu and lasted for about 2 hours. All units are located within a 20 mile radius in Orange County Califorina. The problem cleared on it own but I'm wondering what the heck happened. Did anyone else have this problem? -- Tim

3 6

Re: [App_rpt-users] Trimble Gone Mad
by Tim Sawyer 14 Feb '16

14 Feb '16

I've reported the outage. Thanks for the link. On Sat, Feb 13, 2016 at 8:50 PM, Stacy <kg7qin(a)arrl.net> wrote: > Interference from an external source? > > Seal beach maybe? Or possibly someone has a jammer they were playing with > that caused the problem? > > http://www.gps.gov/spectrum/ > > Good resource to report the issue. > > > On 02/13/2016 08:46 PM, Tim Sawyer wrote: > > We had an episode of 3 Trimble GPS units showing intermittent loss of > lock. The problem started at zero hours Zulu and lasted for about 2 hours. > All units are located within a 20 mile radius in Orange County Califorina. > > The problem cleared on it own but I'm wondering what the heck happened. > Did anyone else have this problem? > -- > Tim > > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > -- -- Tim

1 0

SUBJ: Node Connection Error - help needed
by Jim Aspinwall 13 Feb '16

13 Feb '16

Trying to connect my 43039 to 42610, 41170 - getting CLI string back: NOTICE[16830]: chan_iax2.c:4087 __auto_congest: Auto-congesting call due to slow responseand verbal "connection failed" I can connect to 42574, 2065, as well as other user/end-point nodes. Any clue where to start looking in my configuration to track this down/resolve it? Tnx in advance, de Jim NO1PC, node 43039

1 0