- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] denying inbound calls
by Greg 17 Mar '15

17 Mar '15

On 02/12/2015 08:03 PM, app_rpt-users-request(a)ohnosec.org wrote: > denying inbound calls An inexpensive 15 watt dummy load on my 5 watt node radio provides good handheld coverage around the house without having to worry about legalities. An in-line antenna switch allows me to switch from the dummy load to a roof-top antenna for the few times when more range is needed. 73 Greg WB7UBC

2 2

connections dropping
by Robert Newberry 17 Mar '15

17 Mar '15

OK so old buzzard transmission coming up. So I've been posting on this list about my zoiper connection dropping in the middle of the night. I've had someone helping me directly and we've been discussing and trying things. A little background first. I run a full time call on zoiper to my node, the node and zoiper are both on the same network. Those are connected thru a un-managed switch to a cable modem that I use as my router. I also have a remote node with a persistent connection connected to this node in question. I noticed for the last couple of nights my persistent connection and my zoiper call drops about 1AM. I decided to leave a PC with the CLI up and running on the same network as my node and zoiper client so I could see if any clues show up. Here is what I found. I hope this sheds some clues as to what my problem is. Thank you, Bob/N1XBM -- <Zap/pseudo-1455758404> Playing 'rpt/node' (language 'en') -- <Zap/pseudo-1455758404> Playing 'digits/2' (language 'en') -- <Zap/pseudo-1455758404> Playing 'digits/7' (language 'en') -- <Zap/pseudo-1455758404> Playing 'digits/0' (language 'en') -- <Zap/pseudo-1455758404> Playing 'digits/1' (language 'en') -- <Zap/pseudo-1455758404> Playing 'digits/9' (language 'en') -- <Zap/pseudo-1455758404> Playing 'rpt/remote_disc' (language 'en') -- Hungup 'Zap/pseudo-1455758404' -- Hungup 'Zap/pseudo-1837664147' -- Hungup 'Zap/pseudo-2141789092' -- Hungup 'Zap/pseudo-983830578' -- Hungup 'Zap/pseudo-673820589' -- Hungup 'Zap/pseudo-1852371680' -- Hungup 'Zap/pseudo-1850495802' -- Hungup 'Zap/pseudo-804983196' -- Hungup 'Zap/pseudo-1903391051' -- Hungup 'Zap/pseudo-755531308' -- Hungup 'Zap/pseudo-35813271' -- Remote UNIX connection -- Remote UNIX connection disconnected [Mar 17 01:05:07] ERROR[3177]: chan_usbradio.c:2635 usbradio_read: HID process has died or something!! [Mar 17 01:05:07] WARNING[2255]: chan_iax2.c:921 jb_warning_output: Resyncing the jb. last_delay 5664, this delay 9852, threshold 1012, new offset -9852 -- Hungup 'Zap/pseudo-1830219110' -- Hungup 'Zap/pseudo-1989000290' -- Hungup 'Zap/pseudo-475339605' -- Hungup 'Zap/pseudo-2100578721' -- Hungup 'Zap/pseudo-482564468' -- Hungup 'Zap/pseudo-1034923608' -- Hungup 'IAX2/104.228.248.235:4569-6680' -- Hungup 'Zap/pseudo-1152941370' -- Hungup 'IAX2/108.33.72.83:4569-9157' -- Hungup 'Zap/pseudo-1675411913' -- Hungup 'IAX2/n1xbm-2229' -- Hungup 'Zap/pseudo-1959412245' [Mar 17 01:05:07] WARNING[2236]: app_rpt.c:22043 rpt_master: rpt_thread restarted on node 27086 -- Re-Loading config for repeater 27086 -- rpt (Rx) initiating call to Radio/usb27086 on Radio/usb27086 == Set device 4-2 to usb27086 [Mar 17 01:05:08] WARNING[12981]: chan_usbradio.c:1736 hidthread: Loaded parameters from usbradio_tune_usb27086.conf for device usb27086 . [Mar 17 01:05:08] WARNING[12980]: chan_usbradio.c:2710 usbradio_read: Possibly stuck USB read channel. [usb27086] [Mar 17 01:05:08] WARNING[12980]: chan_usbradio.c:2713 usbradio_read: Nope, USB read channel [usb27086] wasn't stuck after all. -- Accepting UNAUTHENTICATED call from 104.228.248.235: > requested format = gsm, > requested prefs = (gsm|g726aal2|ulaw), > actual format = ulaw, > host prefs = (ulaw|gsm), > priority = mine -- Executing [27086@radio-secure:1] Rpt("IAX2/104.228.248.235:4569-1820", "27086") in new stack == Spawn extension (radio-secure, 27086, 1) exited KEEPALIVE on 'IAX2/104.228.248.235:4569-1820'

1 0

Record repeater audio ?
by KB0KZR 16 Mar '15

16 Mar '15

Hi all-- Our group may have a need to record the audio on the repeater, linked or not (but if linked, include the mixed audio). It seems we have some possibly unlicensed individuals using our systems. I say possibly, because they're speaking Spanish -- they do seem to identify, but all the callsigns we've heard are out of state and most are expired. We'd like to start with making recordings to be translated after the fact, before we start trying to track them down. Keeping recordings of on-air traffic doesn't seem like a bad idea in any case though. Is there a good way to make recordings with app_rpt? Asterisk itself could do it, I think, although I'd have to figure out how (might have to pass through meetme somehow), but I don't think local repeater traffic ever passes through Asterisk in a way I can record? Thank you, -Matt Sturtz, KB0KZR-

5 4

CLI Commands - rpt fun
by Luke Rohn 15 Mar '15

15 Mar '15

Hello, I am learning the CLI commands and wanted to see if anyone can explain the function of rpt fun1 vs. rpt fun I have figured out rpt fun: KK7XX*CLI> rpt funUsage: rpt fun <nodename> <command> Send a DTMF function to a node If I type in "rpt fun 28806 *312345" then my node (28806) connects to node # 12345 in transceive mode. If I type in "rpt fun 28806 *71 then all nodes that I am connected to are immediately disconnected. If I try the same commands using "rpt fun1 ...." then nothing happens. Is there another usage of/for rpt fun1? BTW rpt fun1's help file is the same as rpt fun: KK7XX*CLI> rpt fun1Usage: rpt fun <nodename> <command> Send a DTMF function to a node Thanks for any help you can offer Luke

1 0

backup
by jimmy keffer 14 Mar '15

14 Mar '15

i would to make backup iso of my server i tried mondo but the iso makes boot anyone ever make an iso of your server my server is a data center so can't use dvd drives jimmy ka3vgm

1 0

Periodic plea for help
by Robert Newberry 14 Mar '15

14 Mar '15

I seem to be having a problem with my iax connection I keep open 24/7 every morning the PC I keep zoiper open full time is disconnected it says "normal call clearing". I just recently setup a permanent connection from a remote node to this node that I run zoiper on full time. The connection seems to be disconnecting as well in the wee hours. I usually ssh into my remote node and issue astres.sh and the connection automatically comes back. Is there anyone here who can help me determine why my node is doing this? I've only been at this for a year I've gotten better but this problem appears over my head. Thank you Bob/N1XBM

2 1

Beaglebone Black and Raspberry PI 2 Allstarlink SD card images
by (KP4TR)Ramon Gonzalez 14 Mar '15

14 Mar '15

Hello, A new website has just been setup to host 2 sd card images recently created for Allstarlink for the Raspberry Pi2 and now the Beaglebone Black. They are plain jane builds, with no add-on tools, web servers or anything you wouldn't need when you just want to talk on a radio. These are strictly experimental, but the work for me. If anyone would like to try out these builds for the Pi2 or the Beaglebone Black, they are located here: http://latinovoip.net These builds created with the excellent tools hosted at Github by Anthony VK2ACP. 73!

1 0

Web Transciever
by Jamey Wright 14 Mar '15

14 Mar '15

Good Evening All, I have just finished up a new server and node install but I am running into an issue. My node (27981) shows connected (Green) on the AllStarLink status page but I can't connect to the Web Transceiver. When I click on the node number in the list and it goes to the Web Transceiver page everything loads but it does not connect. If I click on the 'connect' button, nothing happens. My node is behind a Cisco firewall but I have an outside address NATed to the IP of the node PC and port mapping configured to have UDP/4569 translated to UDP/4569. I also have the correct settings in the access list to allow the traffic. I also have SSH on 222 configured the same way and it works fine. I'm guessing there is a config in a file somewhere that I either missed or mis-configured. Thanks in advance. Jamey WR4JW

2 1

Setting RTCM Levels
by Rob 13 Mar '15

13 Mar '15

What is the best way to set RTCM levels? We had them set and they sounded good over the air but then seemed to revert to sounding crappy. Thanks.

2 2

Re: [App_rpt-users] Periodic Plea for help
by Mike Lussier 12 Mar '15

12 Mar '15

Good afternoon Bob, I'm running th latest version on my BBB from Doug. I also keep an open connection but some what different. I have IP Phones in my home Running off of a Raspbx. I have created a group of IAX2 trunks to my nodes. I have 1 phone that I keep connected to the nodes monitoring traffic. I only have to pickup any phone and just dial the node number. I have never had it go down unless I have forced a reset on my raspbx or on the Beagle bone black nodes. I still can't use DTMF to dial a phone in the PBX. Augh !! Mike AE4ML Message: 1 Date: Thu, 12 Mar 2015 11:00:02 -0400 From: Robert Newberry <N1XBM(a)amsat.org> To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] Periodic plea for help Message-ID: <CAM09xEa_axahzviQsHhvsWFwn7Mc-RxGeWupi2Jk1hd51vndDg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I seem to be having a problem with my iax connection I keep open 24/7 every morning the PC I keep zoiper open full time is disconnected it says "normal call clearing". I just recently setup a permanent connection from a remote node to this node that I run zoiper on full time. The connection seems to be disconnecting as well in the wee hours. I usually ssh into my remote node and issue astres.sh and the connection automatically comes back. Is there anyone here who can help me determine why my node is doing this? I've only been at this for a year I've gotten better but this problem appears over my head. Thank you Bob/N1XBM -- *"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*

1 0