- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Zoiper Unreliability
by mike＠midnighteng.com 07 Dec '14

07 Dec '14

You might try... inserting & unplugging the headphones several times as certain models has a problem with the jack switch thinking the headphones were still plunged in.(clean internal switch if you know how, they also pick-up lint over time and hold the switch open) Again, not sure it is the problem but it sure sounds like it to me. ...mike/kb8jnm > -------- Original Message -------- > Subject: Re: [App_rpt-users] Zoiper Unreliability > From: Skyler Fennell <electricity440(a)gmail.com> > Date: Sun, December 07, 2014 5:23 pm > To: "<mike(a)midnighteng.com>" <mike(a)midnighteng.com> > Cc: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > > > I have Also been experiencing problems with audio level. Has anyone else not been able to hear anything barely while the headphones are not plugged in even when volume is all the way up? > > > > On Dec 7, 2014, at 12:59 PM, <mike(a)midnighteng.com> <mike(a)midnighteng.com> wrote: > > > > > > > > While I can't speak specific to android phones, the iPhone will keep > > switching between Cell network and wi-fi. You have no say in the matter > > if they are both on. Since the setup is different for each, only one > > works per setup but the switching causes delays and will buger up your > > connection. There is only one way to keep it from happening. > > > > Best course of action is to "turn on airplane mode" and "then turn wi-fi > > on" if you are wanting to use "wi-fi". > > > > And "turn wi-fi off" if you are only wanting to use "cell network". > > > > It might not be the source of your problem, but it sure sounds like it > > to me. > > > > ...mike/kb8jnm > > > >> -------- Original Message -------- > >> Subject: [App_rpt-users] Zoiper Unreliability > >> From: Skyler F <electricity440(a)gmail.com> > >> Date: Sun, December 07, 2014 1:16 pm > >> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > >> > >> > >> Has anyone experienced problems with the Zoiper iPhone app? > >> > >> Sometimes it gets stuck on transmit, and I keep pressing pound and nothing > >> works until I end call. This happens too often (usually 10 minutes into the > >> call) to be safely useable. > >> > >> -- > >> Skyler Fennell > >> amsatnet.info > >> KDØWHB > >> electricity440(a)gmail.com<hr>_______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users(a)ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> > >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Zoiper Unreliability
by Skyler F 07 Dec '14

07 Dec '14

Has anyone experienced problems with the Zoiper iPhone app? Sometimes it gets stuck on transmit, and I keep pressing pound and nothing works until I end call. This happens too often (usually 10 minutes into the call) to be safely useable. -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

3 2

Re: [App_rpt-users] Linking two nodes together
by mike＠midnighteng.com 05 Dec '14

05 Dec '14

I don't know what you are "unhooking" for the rx at rptr site but it could perhaps be "if the logic on the cor is inverted", it would say the rx is active when not present/disconnected. ...mike/kb8jnm > -------- Original Message -------- > Subject: Re: [App_rpt-users] Linking two nodes together > From: Loren Tedford <lorentedford(a)gmail.com> > Date: Fri, December 05, 2014 1:14 pm > To: Corey Dean <n3fe(a)repeater.net>, app_rpt mailing list > <app_rpt-users(a)ohnosec.org> > > > Corey, > Noticed one problem if i unhook the RX side at the repeater for some reason > it hangs the transmitter open not sure exactly what i am missing here but > if you think of some thing let me know love the *2 for connect think thats > a great idea > > > Loren Tedford (KC9ZHV) > Email: lorentedford(a)gmail.com > Email: lorentedford(a)live.com > Email: lorentedford(a)aol.com > Email: LorenCS(a)Ltcraft.net > Email: lorentedford(a)yahoo.com > Email: loren(a)lorentedford.com <loren(a)lorentedford.com> > Email: loren(a)richlandcountycomputers.com > Phone: 618-553-0806 > http://www.lorentedford.com > http://www.Ltcraft.net <http://www.ltcraft.net/> > http://www.richlandcountycomputers.com > http://kc9zhv.lorentedford.com > > > On Fri, Dec 5, 2014 at 12:00 PM, Corey Dean <n3fe(a)repeater.net> wrote: > > > Unhook the rx from the repeater site and unhook the tx from your house and > > the. Just connect them together. You can also disable the rx at the > > repeater and do a *2 for receive only to the site at your house. > > > > Corey > > > > On Dec 5, 2014, at 12:54 PM, Loren Tedford <lorentedford(a)gmail.com> wrote: > > > > Yes Doug was looking to link via Internet for now till I can find some one > > that really knows how to tune Duplexers.. lol... yea I have had bad look > > with 7 different radio communication companies around here getting this > > done either they lock open the repeater or you cant hear anyone through the > > recieve side of the system.. So my goal was to setup a node at the house > > for just RX use only and set up the Transmitter at the repeater site for > > now.. Internet link them Voice over ip node to node.. I have two URIs and > > two cables however one cable is a repeater cable suppose i could probably > > use this on the RX side then use the other one for the transmitter.. Just > > guessing Special Thanks goes out to Chris Curtis will try this thanks!! :) > > Any other thoughts or suggestions with this project please let me know.. > > > > Loren Tedford (KC9ZHV) > > Email: lorentedford(a)gmail.com > > http://kc9zhv.lorentedford.com > > > > > > On Fri, Dec 5, 2014 at 9:50 AM, Doug Crompton <doug(a)crompton.com> wrote: > > > >> Do you mean linking via a normal Allstar link? or linking via RF. It is > >> not clear what you are trying to do. > >> > >> You can link two nodes privately if you know the IP address and port of > >> each node. You just enter the info for the OTHER node in the nodes section > >> of rpt.conf. Assuming you have a good Internet path once this is entered > >> and Asterisk is restarted you should be able to connect. Of course you also > >> need the port forwards in the routers also. > >> > >> [nodes] > >> ; Note, if you are using automatic update for allstar link nodes, > >> ; no allstar link nodes should be defined here. Only place a definition > >> ; for your local nodes, and private (off of allstar link) nodes here. > >> > >> 1998 = radio@ip.address.for.1999:port/1998,NONE > >> > >> This show one end. The other end would be just the opposite. Port is only > >> needed if it is other than the default 4569. > >> > >> > >> > >> *73 DougWA3DSPhttp://www.crompton.com/hamradio > >> <http://www.crompton.com/hamradio>* > >> > >> > >> ------------------------------ > >> Date: Fri, 5 Dec 2014 01:52:39 -0600 > >> From: lorentedford(a)gmail.com > >> To: app_rpt-users(a)ohnosec.org > >> Subject: [App_rpt-users] Linking two nodes together > >> > >> > >> Need to kinda get some examples of how to link two nodes together > >> examples lets say node 1 is at the repeater site and node 2 is at my house > >> and lets say that I cant get some one to tune up my duplexer properly.. > >> what is the best way to link two nodes together to make my repeater at > >> least functional.. > >> > >> Thanks in advance > >> Loren Tedford (KC9ZHV) > >> Email: lorentedford(a)gmail.com > >> > >> http://kc9zhv.lorentedford.com > >> > >> > >> _______________________________________________ App_rpt-users mailing > >> list App_rpt-users(a)ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe > >> from this list please visit > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll > >> down to the bottom of the page. Enter your email address and press the > >> "Unsubscribe or edit options button" You do not need a password to > >> unsubscribe, you can do it via email confirmation. If you have trouble > >> unsubscribing, please send a message to the list detailing the problem. > >> > >> _______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users(a)ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> > >> To unsubscribe from this list please visit > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll > >> down to the bottom of the page. Enter your email address and press the > >> "Unsubscribe or edit options button" > >> You do not need a password to unsubscribe, you can do it via email > >> confirmation. If you have trouble unsubscribing, please send a message to > >> the list detailing the problem. > >> > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > > to the bottom of the page. Enter your email address and press the > > "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > > confirmation. If you have trouble unsubscribing, please send a message to > > the list detailing the problem. > > > ><hr>_______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Linking two nodes together
by Loren Tedford 05 Dec '14

05 Dec '14

Need to kinda get some examples of how to link two nodes together examples lets say node 1 is at the repeater site and node 2 is at my house and lets say that I cant get some one to tune up my duplexer properly.. what is the best way to link two nodes together to make my repeater at least functional.. Thanks in advance Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com http://kc9zhv.lorentedford.com

3 4

Re: [App_rpt-users] Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
by mike＠midnighteng.com 04 Dec '14

04 Dec '14

For your shell script, you probably only need 755 chmod 755 /etc/path/to/script/filename.sh You can type chmod --help for some quick help man chmod for extended manual pages, Q to exit or visit http://www.computerhope.com/unix/uchmod.htm for further reading and understanding. I am uncertain of your php script as I don't have enough info. You may need to set ownership of the file? There are other potential issues from the php server for file access/permission & security. To much for email. You will find google is your friend. You will have to start with the obvious that the shell script lacked permissions and go from there. Make sure your shell script has a proper shebang ie start the first line of the file with #!/bin/bash or the path to the interpreter you are using (normally bash). Without the proper shebang, it will likely not run anything with external calls. Without proper permissions, it will not run at all except when you (the owner of file) run it from a command line. ...mike/kb8jnm -------- Original Message -------- Subject: Re: [App_rpt-users] Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) From: Skyler Fennell <electricity440(a)gmail.com> Date: Thu, December 04, 2014 7:36 pm To: "<mike(a)midnighteng.com>" <mike(a)midnighteng.com> Cc: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Do you happen to know how I can check permissions/the chmod code which I can use to fix permissions? On Dec 4, 2014, at 2:53 PM, <mike(a)midnighteng.com> <mike(a)midnighteng.com> wrote: "If the script runs fine from your command line, and not for remote user", I say again, it is a file ownership /permissions issue. Check the script file for proper permissions and that the script starts off with a proper shebang. ...mike/kb8jnm -------- Original Message -------- Subject: Re: [App_rpt-users] Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) From: Skyler F <electricity440(a)gmail.com> Date: Thu, December 04, 2014 3:49 pm To: "<mike(a)midnighteng.com>" <mike(a)midnighteng.com>, "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> The script works fine when I run it normally. I also tried to enter the specific command on the web page. On Thu, Dec 4, 2014 at 11:25 AM, <mike(a)midnighteng.com> wrote: Does - '/etc/asterisk/scripts/disconnect' script have ownership rights ? ...mike/kb8jnm -------- Original Message -------- Subject: [App_rpt-users] Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) From: Skyler Fennell <electricity440(a)gmail.com> Date: Thu, December 04, 2014 12:05 pm To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> I created a simple php file where anyone with the link can disconnect my nose from all links if something wrong is going on (due to the fact my node is same channel, half duplex linked, and if it was stuck on transmit, local transmissions would double with the node) <?php echo "All links sucessfully disconnected from 40764, KDØWHB test1"; echo '><pre>'; // Outputs all the result of shellcommand "", and returns // the last output line into $last_line. Stores the return value // of the shell command in $retval. $last_line = system('/etc/asterisk/scripts/disconnect', $retval); // Printing additional info echo ' </pre> <hr />Last line of the output: ' . $last_line . ' <hr />Return value: ' . $retval; ?> The code was found on the php website as a sample and I just changed ls to my script that works when ran from a normal shell. Visiting kd0whb.duckdns.org/disconnect.php shows the output of "unable to connect to remote" Any suggestions? Thanks, Skyler, KDØWHB _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Skyler Fennellamsatnet.info KDØWHB electricity440(a)gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Re: [App_rpt-users] Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
by mike＠midnighteng.com 04 Dec '14

04 Dec '14

2 1

RTCM Error Code
by Fredric Moses 04 Dec '14

04 Dec '14

Hello, I currently have 4 RTCM's running for a few years now on a UHF system just fine... I want to start doing the same to a VHF repeater that I have taken over.. I created a second port in the voter.conf and attached a new RTCM to that port and it worked for a bout a week now.. There was a crew at the site doing work and a power cycle happend on the gear and now the single VHF RTCM is spitting out the following.. 12/04/2014 23:59:15.160 Inbound (Eth Rx) packet out of bounds by: -1 All the UHF RTCM's are connected fine and passing traffic.. The server shows the VHF connected and it is receving audio/cor just fine but no TX audio. If i pull the ethernet plug from the vhf it goes into failover mode and local repeats just fine... But with the ethernet plugged in i get no TX audio and the console on the RTCM fills with the above messages... -- Fredric Moses - W8FSM - WQOG498 fred(a)moses.bz

1 0

Re: [App_rpt-users] Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
by Skyler Fennell 04 Dec '14

04 Dec '14

I am still getting the unable to connect error after I modified script and tried directly from the php file: $last_line = system('/usr/sbin/asterisk -rx "rpt fun 40764 *71"', $retval); ( at Kd0whb.duckdns.org/disconnect.php) > On Dec 4, 2014, at 2:29 PM, Skyler Fennell <electricity440(a)gmail.com> wrote: > > I am still getting the unable to connect error after I modified script and tried directly from the php file: > > $last_line = system('/usr/sbin/asterisk -rx "rpt fun 40764 *71"', $retval); > > ( at Kd0whb.duckdns.org/disconnect.php) >

1 0

Re: [App_rpt-users] Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
by mike＠midnighteng.com 04 Dec '14

04 Dec '14

4 4

Re: [App_rpt-users] How to setup Allstar Monitor
by Skyler Fennell 04 Dec '14

04 Dec '14

Oops I meant to say that was the start of the other file, I did not combine them into one. Maybe my problem is that I left all the defaults, just to test it. (Ex, node 1000 etc is still in the allmon.ini.php file). > On Dec 4, 2014, at 10:55 AM, Ian <jedscoot(a)yahoo.com> wrote: > > Hello Skyler, > > To my old eyes it looks like you have combined the allmon.ini file and the manager.file. > > My allmon.ini file only has this in it:- > > [NodeNumber] > host= > user= > passwd= > voter=no > menu=yes > [About] > url=about.php > > If you have more than one node configured and one is wonrly configured, you will get the " waiting " prompt for all the nodes, not just the wrongly configured one.. > > Regards, > Ian.. > > -------------------------------------------- > On Thu, 4/12/14, Skyler Fennell <electricity440(a)gmail.com> wrote: > > Subject: Re: [App_rpt-users] How to setup Allstar Monitor > To: "Tim Sawyer" <tim.sawyer(a)mac.com>, "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > Date: Thursday, 4 December, 2014, 17:54 > > Still > having troubles getting allmon to work. Visiting kd0whb.duckdns.org/allmon > still gets stuck on "waiting". > Below is the > allmon.ini.php > <?php[About]url=about.php[40764]host=kd0whb.duckdns.org:5038user=admin > passwd=<my > password>menu=yes > [Some other > thing]url=someotherthing.php?> > > [general] > > displaysystemname = yes > > enabled = yes > > webenabled = yes > > port = 5038 > > > > > ;httptimeout = 60 > > ; a) httptimeout sets the Max-Age of the > http cookie > ; b) httptimeout is the amount of time the > webserver waits ; > on a action=waitevent request (actually its > httptimeout-10) ; c) > httptimeout is also the amount of time the webserver keeps > ; a http session > alive after completing a successful action > > > bindaddr = 0.0.0.0 > > ;displayconnects = yes > > ; > > ; Add a Unix epoch > timestamp to events (not action responses) > ; > > ;timestampevents = yes > > > > [admin] > > secret > = <my password> > > read = > all,system,call,log,verbose,command,agent,user,config > write = > all,system,call,log,verbose,command,agent,user,config > > The passwords are the same in allmon > ini and manager.conf. > Any suggestions? > Thanks,Skyler > > >

1 0