- App_rpt-users - lists.keekles.org

Passing DTMF
by KJ6KO 21 Nov '14

21 Nov '14

Is it possible to pass all DTMF locally and not have them pass to or from the network? Using URI, simpleusb and duplex=2 ? This is a Link HUB repeater that ties 6 other 900 repeaters together via RF. Thanks... Greg KJ6KO www.nc9rs.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 10761 (20141121) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

1 0

Re: [App_rpt-users] Frozen repeater
by mike＠midnighteng.com 20 Nov '14

20 Nov '14

1 0

Re: [App_rpt-users] kernel panic in the cold
by Chris Curtis 19 Nov '14

19 Nov '14

Thanks for all the input. After running 24 hours in the house without a hitch, I'm going to go with sub freezing temperatures as the culprit. I realize I didn't put enough background in my post so here's a little more in case it'll help someone else. Box: Regular old hand me down desktop in a mini tower case. The acid/cent distro from the website link. Old single core processor with HT enabled Traditional spinning platter hard drive (SATA interface) DDR2 ram 3 modified cm108 fobs Shed: Lowest temperature so far 9F Averaging around 33F for the problem period Why didn't I think of this before: Last system I owned/operated was a 3 band repeater with an irlp node onsite. The controller was an ff-800. Only trouble I had in that non climate controlled shack was the ff-800 needed a warming pad draped over the cabinet in the winter. The irlp node/pc never gave me any trouble but the ff-800 would 'talk funny' when it got really cold. Should have remembered this earlier. Again, thanks for the replies, I appreciate it. Just like the well pumphouse, I'll put an incandescent light bulb near the box/fobs and try that. Chris KB0WLF From: mike(a)midnighteng.com [mailto:mike@midnighteng.com] Sent: Tuesday, November 18, 2014 12:56 PM To: Chris Curtis Subject: RE: [App_rpt-users] kernel panic in the cold Chris, If this turns out to be the problem, let me know. I have made many options for such a winter occasion. But be sure to check the cpu reporting of temp to bios and OS. Normally, they are meant to look for overheating not under-heating. But I have problems with the thermistor being out of intended range and that created a problem (disable temp mon in bios). Many low power electronics/cpu's do not function well at sub freezing temps including the sound dongles. ...mike/kb8jnm -------- Original Message -------- Subject: [App_rpt-users] kernel panic in the cold From: "Chris Curtis" <demoman(a)rollanet.org> Date: Tue, November 18, 2014 1:19 pm To: <app_rpt-users(a)ohnosec.org> It's cold out in the shed. No climate control at all. Could this be the culprit of my almost immediate kernel panic lockups ? Server/nodes had been running fine over the summer. I've brought the box inside the house and will run it with the dongles attached to see if some heat will fix the problem. Just wondering if anyone else had been experiencing: "kernel panic not synching fatal exception in interrupt"; these past months. Thanks for your time, Chris KB0WLF Chris KB0WLF _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Subject: kernel panic in the cold
by Michael Lussier 19 Nov '14

19 Nov '14

I noticed my repeater is off this morning. I happen to be going up on the mountain this morning. It's 14 degrees here so it's got to be single digits up there at 2500 feet. Will up date later Mike AE4ML Sent from an iPhone 5 iOS 8 Mike.Lussier(a)gmail.com AE4ML(a)arrl.net AE4ML(a)amsat.org

3 3

kernel panic in the cold
by Chris Curtis 19 Nov '14

19 Nov '14

It's cold out in the shed. No climate control at all. Could this be the culprit of my almost immediate kernel panic lockups ? Server/nodes had been running fine over the summer. I've brought the box inside the house and will run it with the dongles attached to see if some heat will fix the problem. Just wondering if anyone else had been experiencing: "kernel panic not synching fatal exception in interrupt"; these past months. Thanks for your time, Chris KB0WLF Chris KB0WLF

4 3

good connection to URI?
by pete M 18 Nov '14

18 Nov '14

Hi guys.. ast week i did a harness to hook my tkr-750 ver 2 to a URI here is what I did: tkr-750 pin ----- uri 8 to 22 (ctcss tone to tkr)9 to 26 (voice to tkr)10 to 21 (audio to uri)12 to 19 (ground)16 to 1 (ptt)17 to 8 (cor) I dont need the cor cause I want to do all the signaling by dsp but still hoocked it up in case.. So does this make sens? cause I cant have the ctcss level right. I try to switch the ctcss and voice from left to right in case I had reverse the wiring.put both channel as tone and voice to test. no go I cant send ctcss from the URI. I know I can send it from the repeater itself.. But I want to control when it is sent. Thanks for taking the time to help me ;-)

3 4

Update to gmail failure
by Robert Newberry 18 Nov '14

18 Nov '14

A while back I stated up an email script on my node. For about a month once a week my node would get locked out of gmail and I'd have to log into the Web site and unlock the account. I tried everything that people suggested to no avail. It just dawned on me the other day it's been two months and I haven't had a hitch with my my email updates from the node. So it appears whatever was going on corrected itself. Strange I know!

1 0

Video on setting up Allstar
by Skyler Fennell 17 Nov '14

17 Nov '14

Hi everyone, Been working in this YouTube video for beginners on setting up Allstar link. I have it unlisted for now, waiting if I need to edit it for various reasons (ex if I have incorrect info or something someone wants to add) before I release to general public. So here is the link to part one, part two will hopefully come soon. https://m.youtube.com/watch?v=jJa0Rsj3ZyY Tell me if you have any comments, thoughts, or if I should make any changes, and ideas for the next videos. 73 Skyler KDØWHB

1 0

Re: [App_rpt-users] Show link topology from cli?
by Bryan Fields 17 Nov '14

17 Nov '14

On 11/16/14, 1:11 AM, Doug Crompton wrote: > I am not sure this is exactly what you want but if you want to see what a node > is connected to along with information on each node 'lsnodes' will do that to > any node via the web. It is built into the BBB. All you need to do is route > port 80 (or whatever port you have the http servr on) and access the node with > a web browser. Locally you can do it without forwarding a port. I'm not running a web server or have a BBB(?). I know there is a bubble map that the stats.allstarlink.org draws, but how can I get this data out of asterisk directly? I can figure out my directly connected neighbors, but how can I figure out who's connected to them? Think of it like looking at OSPF neighbors vs. looking at the OSPF database on a router. I want to see the database. Thanks, -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

3 5

Installation And configuration of URIs with asterisk app_rpt
by Salik Satti 17 Nov '14

17 Nov '14

Hi All, I want to use DMK URIs with asterisk. But i am facing issues regarding installation and configuration of a node with ACID. Please help me in this regard. Thanks in advance. Salik Mumtaz Satti, A-EXEN National Radio And Telecommunication Corporation, Haripur Pakistan www.nrtc.com.pk salik.satti(a)nrtc.com.pk Contact: +923155414048 Skype: salik.satti6

2 3