- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Time question
by Doug Crompton 20 Sep '14

20 Sep '14

yes. 73 Doug WA3DSP http://www.crompton.com/hamradio From: kk6ecm(a)gmail.com To: doug(a)crompton.com Subject: RE: [App_rpt-users] Time question Date: Fri, 19 Sep 2014 21:49:13 -0700 forgive me for a correction, but I believe you meant to say /etc/asterisk/local/saytime.pl Thanks, Bob kk6ecm From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Doug Crompton Sent: Friday, September 19, 2014 9:18 PM To: Mike Lussier Cc: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Time question Mike, The short answer is you can't. The script is setup to say 12 hour format with AM/PM. It could be changed but I have no desire or time to do that right now. If someone else wants to tackle it I would be glad to include it in the distribution. /etc/asterisk/saytime.pl is a Perl script I wrote that says the time outside of app_rpt so you can alter that anyway you like as well as set the volume. I would be glad to assist anyone if they want to modify that code for say a say24time.pl script that could be called. 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Fri, 19 Sep 2014 20:33:59 -0400 From: mike.lussier(a)gmail.com To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] Time question I have both of my systems transmitting my call and the time every hour. Its states it in 12 hour fomat. How can I get it to do it in24hour format ? The clock on the Beagle is set for 24 hour format. Thank you Mike AE4ML -- "We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Proxy Server and Echolink
by John 18 Sep '14

18 Sep '14

Node 2186 is set up with a proxy and seems to be working perfectly for incoming and outgoing Allstar calls. However, I'm having trouble with Echolink. The station list appears to be downloading, my node shows up in the Echolink active node list, but I have trouble connecting to other Echolink nodes including the Echo Reflector. Sometimes when I do manage to connect, I will be disconnected within a few minutes. Should Echolink work normally with a proxy server or have I perhaps fat-fingered something in the config files? Troubleshooting suggestions appreciated. John

1 0

Re: [App_rpt-users] MSF to RTCM Wiring
by Robert 18 Sep '14

18 Sep '14

OT :: I absolutely agree that the tower companies should be more ham friendly and it would be great if the ARRL could help. But a large part of the issue is that there are some enterprising hams that have managed to get their own structures and either dont have the room or they share with just their friends. I am fortunate to pay $50 for one site and only $140 for the second site. But the truly awesome sites controlled by the power houses demand $700 for a ¼ of a rack. I would love to learn from you the art of syncing the TX audio. I have a natural cutoff where a normally full scale signal begins to drop and what we call site #2 can naturally come in and take over. Site #3 is either going to be on the same pair, or a different pair. Im not sure yet. Because site #1 straddles both sides of the mountain voting does not seem to be an option. The repeaters sites can see one another. A major part of our mission is as a true ECOMM repeater that can disconnect Allstar nodes if a regional emergency takes place. Because of our 6,400 foot altitude and the ability to talk and listen over the majority of So. California site selection and power level are key. Ill read and hope to learn how to connect the Motorola GPS units that pop right into the MSF 5000s. Thank you for sharing your advice with me. _____ From: KJ6KO [mailto:kj6ko@innercite.com] Sent: Wednesday, September 17, 2014 10:32 PM To: Robert Subject: Re: [App_rpt-users] MSF to RTCM Wiring My friend has a GPS connected to every RTCM so the TX audio is time coded and all repeaters TX at exactly the same time in sync. Not sure about how he connects the GPS to the RTCM, but I just helped him put one in a couple weeks ago! Guess I should have asked more about it, but I remember him dialing into the RTCM to see if it was GPS locked! Probably part of the reason they are so much! I was thinking about writing the ARRL to complain about the tower companies (ATC, SBA, Crown Castle etc) not being "Ham Friendly" and see if they could lean on them! Couldn't be worse than doing nothing! ----- Original Message ----- From: Robert <mailto:robert@controlservers.net> To: app_rpt-users(a)ohnosec.org Sent: Wednesday, September 17, 2014 3:54 PM Subject: Re: [App_rpt-users] MSF to RTCM Wiring The Moto modules ARE the GPS units :-) But Ive still never done this. But are you saying that the RTCM has a built-in GPS or that one may be connected? Mark called me today and said my RTCM missed shipping but is leaving today. <silly teen-aged girl happy dance goes here > I looked at the #2 and #3 MSF 5000 and it says that it is a C73 CBX and not CLBs. Hmm maybe the one on the hill is a CLB. OT: Right now I am desperately looking for someone that has a small space on Strawberry Peak in the San Bernardino Mountains. American Tower is a joke and SubCarrier hasnt replied. I wonder if anyone in the group has a suggestion? Heaps Peak is raining down on Pali Mountain with -1dBm of 99.1 on your FM freakin dial. If I add the Angle Linear dual cavity back in it reduces it by 99dB (-67dBm). Its a sharp 1MHz window. Strawberry sees the coastal side AND the high desert side. Will $$$. Thank you for the replies. You are all appreciated. _____ From: KJ6KO [mailto:kj6ko@innercite.com] Sent: Tuesday, September 16, 2014 11:12 PM To: robert(a)controlservers.net Subject: Re: [App_rpt-users] MSF to RTCM Wiring Not sure what "Moto Modules" you are talking about, but the RTCM will do that with a GPS antenna. No need for any special modules. Control, repeat and sync'd TX audio can all be done by the RTCM. Freq can be done by GPS also. Maybe that's the module you are talking about? Sounds like fun! ----- Original Message ----- From: Robert <mailto:robert@controlservers.net> To: 'KJ6KO' <mailto:kj6ko@innercite.com> ; app_rpt-users(a)ohnosec.org Sent: Tuesday, September 16, 2014 9:16 AM Subject: RE: [App_rpt-users] MSF to RTCM Wiring The repeater will be one of three. Each will communicate with a master server in a commercial data center where our business is located. If I have read correctly this is a hub? At any rate the CLBs will be run with RTCM as non-voted but with synchronized TX. I have the Motorola modules for this. _____ From: KJ6KO [mailto:kj6ko@innercite.com] Sent: Tuesday, September 16, 2014 8:27 AM To: Robert Subject: Re: [App_rpt-users] MSF to RTCM Wiring Hi Robert, It mainly depends on how you are going to use the system. If it is just a stand alone repeater, the RTCM is a bit of overkill, but will work fine. I have done a couple of MSF's. Assuming this is just a standalone CLB repeater (the one with the EPROM), and not a voted system, I like to keep things as simple as possible. Program the repeater to be a "Base Station", NOT a repeater!. Pull RX audio from the DISCRIMINATOR output of the MSF and make sure the RTCM is set to PLFILTER=YES and DEEPPHASIS=YES. The COR/PL Detect on a MSF is a bit trickey. You have to pull it off of a chip and use a transistor to switch it. For TX, just use the PTT and MIC Input. That is the simplest way. You can also feed raw TX audio directly into the modulator from the RTCM and have the RTCM generate the TX PL if you like, but that is a bit more complicated. I have done it, but I don't really see much of an advantage. ALl these connections are Test Points on the MSF, (Except the COR/PL) and that makes connection easy. ALSO, set the squelch on the RTCM a bit high! The RTCM's squelch circuit is a bit touchy. NOW, if you have a CXB (programmable MSF) it is all basically the same except that you can program an output of the MSF for "Valid PL Signal" and use that as the COR/PL input to the RTCM. I don't use the internal controller as the repeater. I have never been real satisfied with the audio quality of the MSF repeated audio. Best to let the RTCM do all the work and digitally filter the DISC audio rather than let the MSF do it! The RTCM will do all the controlling, tail, ID and courtesy tones for you. Also, don't forget to disable the MSF's TX Timer! Unless you are using a voting system, the URI is a MUCH cheaper source and does everything you want for just a standalone repeater, assuming you have a computer to go with it. I use the Beaglebone! The URI as it will also act as the controller, filter the DISC audio and one thing it does that the RTCM won't do is you have REMOTE audio control! That way, after you install the repeater on a hilltop, and you think the audio is a bit high or low, you can remotely bump it up or down to your hearts content! The RTCM is all manual control! Good luck and 73... Greg KJ6KO ----- Original Message ----- From: Robert <mailto:robert@controlservers.net> To: app_rpt-users(a)ohnosec.org Sent: Monday, September 15, 2014 11:01 PM Subject: [App_rpt-users] MSF to RTCM Wiring I have seen so many different ways of how to wire a controller / RTCM to a MSF 5000 is there one sure fired way to do this? Poor eyesight on my part. I hate being the new guy __________ Information from ESET NOD32 Antivirus, version of virus signature database 10426 (20140916) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com _____ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. __________ Information from ESET NOD32 Antivirus, version of virus signature database 10426 (20140916) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 10426 (20140916) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 10429 (20140917) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 10434 (20140917) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com _____ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. __________ Information from ESET NOD32 Antivirus, version of virus signature database 10434 (20140917) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 10435 (20140918) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

1 0

Re: [App_rpt-users] MSF to RTCM Wiring
by Robert 17 Sep '14

17 Sep '14

The Moto modules ARE the GPS units :-) But I've still never done this. But are you saying that the RTCM has a built-in GPS or that one may be connected? Mark called me today and said my RTCM missed shipping but is leaving today. <silly teen-aged girl happy dance goes here > I looked at the #2 and #3 MSF 5000 and it says that it is a C73 CBX and not CLB's. Hmm. maybe the one on the hill is a CLB. OT: Right now I am desperately looking for someone that has a small space on Strawberry Peak in the San Bernardino Mountains. American Tower is a joke and SubCarrier hasn't replied. I wonder if anyone in the group has a suggestion? Heap's Peak is raining down on Pali Mountain with -1dBm of 99.1 on your FM freakin' dial. If I add the Angle Linear dual cavity back in it reduces it by 99dB (-67dBm). It's a sharp 1MHz window. Strawberry sees the coastal side AND the high desert side. Will $$$. Thank you for the replies. You are all appreciated. _____ From: KJ6KO [mailto:kj6ko@innercite.com] Sent: Tuesday, September 16, 2014 11:12 PM To: robert(a)controlservers.net Subject: Re: [App_rpt-users] MSF to RTCM Wiring Not sure what "Moto Modules" you are talking about, but the RTCM will do that with a GPS antenna. No need for any special modules. Control, repeat and sync'd TX audio can all be done by the RTCM. Freq can be done by GPS also. Maybe that's the module you are talking about? Sounds like fun! ----- Original Message ----- From: Robert <mailto:robert@controlservers.net> To: 'KJ6KO' <mailto:kj6ko@innercite.com> ; app_rpt-users(a)ohnosec.org Sent: Tuesday, September 16, 2014 9:16 AM Subject: RE: [App_rpt-users] MSF to RTCM Wiring The repeater will be one of three. Each will communicate with a master server in a commercial data center where our business is located. If I have read correctly this is a hub? At any rate the CLB's will be run with RTCM as non-voted but with synchronized TX. I have the Motorola modules for this. _____ From: KJ6KO [mailto:kj6ko@innercite.com] Sent: Tuesday, September 16, 2014 8:27 AM To: Robert Subject: Re: [App_rpt-users] MSF to RTCM Wiring Hi Robert, It mainly depends on how you are going to use the system. If it is just a stand alone repeater, the RTCM is a bit of overkill, but will work fine. I have done a couple of MSF's. Assuming this is just a standalone CLB repeater (the one with the EPROM), and not a voted system, I like to keep things as simple as possible. Program the repeater to be a "Base Station", NOT a repeater!. Pull RX audio from the DISCRIMINATOR output of the MSF and make sure the RTCM is set to PLFILTER=YES and DEEPPHASIS=YES. The COR/PL Detect on a MSF is a bit trickey. You have to pull it off of a chip and use a transistor to switch it. For TX, just use the PTT and MIC Input. That is the simplest way. You can also feed raw TX audio directly into the modulator from the RTCM and have the RTCM generate the TX PL if you like, but that is a bit more complicated. I have done it, but I don't really see much of an advantage. ALl these connections are Test Points on the MSF, (Except the COR/PL) and that makes connection easy. ALSO, set the squelch on the RTCM a bit high! The RTCM's squelch circuit is a bit touchy. NOW, if you have a CXB (programmable MSF) it is all basically the same except that you can program an output of the MSF for "Valid PL Signal" and use that as the COR/PL input to the RTCM. I don't use the internal controller as the repeater. I have never been real satisfied with the audio quality of the MSF repeated audio. Best to let the RTCM do all the work and digitally filter the DISC audio rather than let the MSF do it! The RTCM will do all the controlling, tail, ID and courtesy tones for you. Also, don't forget to disable the MSF's TX Timer! Unless you are using a voting system, the URI is a MUCH cheaper source and does everything you want for just a standalone repeater, assuming you have a computer to go with it. I use the Beaglebone! The URI as it will also act as the controller, filter the DISC audio and one thing it does that the RTCM won't do is you have REMOTE audio control! That way, after you install the repeater on a hilltop, and you think the audio is a bit high or low, you can remotely bump it up or down to your hearts content! The RTCM is all manual control! Good luck and 73... Greg KJ6KO ----- Original Message ----- From: Robert <mailto:robert@controlservers.net> To: app_rpt-users(a)ohnosec.org Sent: Monday, September 15, 2014 11:01 PM Subject: [App_rpt-users] MSF to RTCM Wiring I have seen so many different ways of how to wire a controller / RTCM to a MSF 5000 - is there one sure fired way to do this? Poor eyesight on my part. I hate being the new guy. __________ Information from ESET NOD32 Antivirus, version of virus signature database 10426 (20140916) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com _____ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. __________ Information from ESET NOD32 Antivirus, version of virus signature database 10426 (20140916) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 10426 (20140916) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 10429 (20140917) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

1 0

ping pong-somewhat demystified and a turn for the twilight zone
by George Csahanin 16 Sep '14

16 Sep '14

OK, found an old message from Jim that says this was fixed by adding a line to make rxondelay work, and my source is from August 31 2011, which is two years before the fix. I’m going to step into the deep end here and ask a question that may seem like a limey question, but really a cpp question. ./configure output says cpp failed sanity test, look at the log file and I see that it was looking for an include file but cannot find it. The one in question is limits.h, supposedly in linux/limits.h and I looked in /usr/include and it is there. So, please, somebody learn me here. This has been a mystery to me since I started hacking this stuff in the early 90’s and proves why I should maybe stick to broken down TV stations...but...WHERE is it looking for this include file? In limey the source all goes under /usr/src/astsrc/ then under that in /usr/src/astsrc/asterisk is where ./configure, etc is. I tried loading new source, and the August 31, 2011 is what getsrc will download. So added question, assuming I can make this work, can I load the latest source code on the limey box, I have never seen anything different. But curious. George J Csahanin W2DB Cedar Park, TX

1 0

simplex node and ping-pong-ing
by George Csahanin 16 Sep '14

16 Sep '14

I have a simplex node and it has started the ping pong thing. Did it once before and don’t remember how I resolved it. I am using simpleusb, and assuming it also accepts rxondelay. I have it set to rxondelay=150 already and it makes no difference. This radio has had no changes in three years (Custom MVP)I do not use carrier sq at all. the CG detect goes to the COS in on the controller. I also have it set to duplex=0, but that was so I can get telemetry tell me if it is linked to something. But none of that changed. The only thing to change was when I renamed echolink.conf to echolink.conf.off to drop that thing. That’s the only change. The reason why I don’t think rxondelay isn’t working is because I can “kerchunk” for a brief moment and get a response. But according to what I have read, 150 delay should be 3000 ms. George J Csahanin W2DB 2360 Cedar Park, TX

1 0

Looking for iMics
by Sam Skolfield 16 Sep '14

16 Sep '14

Hello Group, I am looking for some Griffin iMic audio interfaces for a repeater I'm putting together for my volunteer radio group. There are several on eBay, but they are severely overpriced. If anyone as one laying around, I would really appreciate the opportunity to buy it from you at a reasonable price. Thanks for reading and 73! SS -- KJ6QFS Sam Skolfield

1 0

Re: [App_rpt-users] MSF to RTCM Wiring
by Robert 16 Sep '14

16 Sep '14

The repeater will be one of three. Each will communicate with a master server in a commercial data center where our business is located. If I have read correctly this is a hub? At any rate the CLB's will be run with RTCM as non-voted but with synchronized TX. I have the Motorola modules for this. _____ From: KJ6KO [mailto:kj6ko@innercite.com] Sent: Tuesday, September 16, 2014 8:27 AM To: Robert Subject: Re: [App_rpt-users] MSF to RTCM Wiring Hi Robert, It mainly depends on how you are going to use the system. If it is just a stand alone repeater, the RTCM is a bit of overkill, but will work fine. I have done a couple of MSF's. Assuming this is just a standalone CLB repeater (the one with the EPROM), and not a voted system, I like to keep things as simple as possible. Program the repeater to be a "Base Station", NOT a repeater!. Pull RX audio from the DISCRIMINATOR output of the MSF and make sure the RTCM is set to PLFILTER=YES and DEEPPHASIS=YES. The COR/PL Detect on a MSF is a bit trickey. You have to pull it off of a chip and use a transistor to switch it. For TX, just use the PTT and MIC Input. That is the simplest way. You can also feed raw TX audio directly into the modulator from the RTCM and have the RTCM generate the TX PL if you like, but that is a bit more complicated. I have done it, but I don't really see much of an advantage. ALl these connections are Test Points on the MSF, (Except the COR/PL) and that makes connection easy. ALSO, set the squelch on the RTCM a bit high! The RTCM's squelch circuit is a bit touchy. NOW, if you have a CXB (programmable MSF) it is all basically the same except that you can program an output of the MSF for "Valid PL Signal" and use that as the COR/PL input to the RTCM. I don't use the internal controller as the repeater. I have never been real satisfied with the audio quality of the MSF repeated audio. Best to let the RTCM do all the work and digitally filter the DISC audio rather than let the MSF do it! The RTCM will do all the controlling, tail, ID and courtesy tones for you. Also, don't forget to disable the MSF's TX Timer! Unless you are using a voting system, the URI is a MUCH cheaper source and does everything you want for just a standalone repeater, assuming you have a computer to go with it. I use the Beaglebone! The URI as it will also act as the controller, filter the DISC audio and one thing it does that the RTCM won't do is you have REMOTE audio control! That way, after you install the repeater on a hilltop, and you think the audio is a bit high or low, you can remotely bump it up or down to your hearts content! The RTCM is all manual control! Good luck and 73... Greg KJ6KO ----- Original Message ----- From: Robert <mailto:robert@controlservers.net> To: app_rpt-users(a)ohnosec.org Sent: Monday, September 15, 2014 11:01 PM Subject: [App_rpt-users] MSF to RTCM Wiring I have seen so many different ways of how to wire a controller / RTCM to a MSF 5000 - is there one sure fired way to do this? Poor eyesight on my part. I hate being the new guy. __________ Information from ESET NOD32 Antivirus, version of virus signature database 10426 (20140916) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com _____ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. __________ Information from ESET NOD32 Antivirus, version of virus signature database 10426 (20140916) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 10426 (20140916) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

1 0

Re: [App_rpt-users] Trouble shooting
by mike＠midnighteng.com 16 Sep '14

16 Sep '14

2 1

Trouble shooting
by Loren Tedford 16 Sep '14

16 Sep '14

Hey its Loren here I am working on our repeater system out here in Olney IL we put in a pico power supply and a few other things including a motherboard we reinstalled from the Acid cd and for some reason we are not passing audio full duplex through the RX side of the repeater suddenly.. Seems strange because the repeater can still capture DTMF makes me wonder if maybe its trying to pick up a ctcss tone or some thing idk did all the trouble shooting I could think of all night last night and still no luck any ideas???? Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com http://www.lorentedford.com http://kc9zhv.lorentedford.com

2 1