- App_rpt-users - lists.keekles.org

COP commands to disable voted receivers?
by Sam Skolfield 05 Aug '13

05 Aug '13

Hello Group, I have recently configured and deployed a simple split-site voted repeater using app_rpt and three RTCMs: two for a pair of receivers, and one for the transmitter. So far, the system is providing top-notch performance in every aspect. Question: Is there a common practice for failing various individual receivers via DTMF command? I imagine this would be of great use for a number of practical and diagnostic applications. If there isn't, is anyone inspired enough to make this happen? Thanks for reading, and have a nice day! -Sam -- KJ6QFS Sam Skolfield

4 7

Event Management Subsystem question
by K&R Yoksh 04 Aug '13

04 Aug '13

Hello, Is there a way to distinguish between an incoming call and and outgoing call in the Event Management subsystem? This would be handy for a script I'm working on. Thanks.. 73 Kyle K0KN Olathe, KS Allstar 2210-2219

1 0

Noob Question
by Barry Berg 02 Aug '13

02 Aug '13

I am having problems getting ACID up and running correctly.... (As if from a noob that is a surprise for the group) Let me take a minute and describe what I am trying to do before I actually get to the problem. I am working with a team involved with search and rescue efforts in respect to flood response. Typically we are working in North Dakota, which compared to other states has a much lower population concentration. That reflects in the Ham population as well. With fewer HAMs there are fewer Amateur facilities, and due to the flatness (honestly, most buildings in my experience are no more than 3 or 4 stories) range on them is relatively localized. However, the flooding can cover a great distance. We have remote teams working 30 or more miles from our base in a major population center. In order to stay in contact with them we are looking to use app_rpt to establish portable remote bases that can connect to the internet from either a governmental internet access (CAT 5 Ethernet) or a portable cell phone type hotspot. We will not be using HAM frequencies, but rather commercially assigned frequencies that we are authorized to use. Each unit will be a remote Base. The idea is to tie these remote units into a single combined network using multiple computers using URIx interfaces / Lox Boards. These I would like to bridge into a single Asterisk Server conference bridge so that any transmission goes out on all remote bases simultaneously, similar to a reflector in the D-Star world. The users all understand circuit discipline very well, and I am not concerned with doubling. In fact I actually want a shared "network" between operational units for situational awareness purposes. However I would like to block access to anyone not specifically authorized from at least the internet side. Multiple "base stations" (at least 3 or 4) would also be used for monitoring and command and control purposes. I was thinking of using the windows application (iaxrpt) available with the XPAR project and usb headphone/mic for the base station. Being able to generate "picture phone" setups of live motion video between base stations on the asterisk network rather than skype etc would also be a plus. Literally the network would cover operational distances in the 30 - 100 mile range and command and control in the thousand mile range. Now my questions. I generated the ACID system on a netbook connected to a URI usb interface. I have ssh working fine, but not yet RDP access to the server. When I bring up the iaxrpt it tries to connect but the connection fails very quickly less than 10 sec. I suspect that its a login/password problem. Any hints on getting that to work. All this is happening within my LAN accessing the server with direct ip addressing. There is another problem like how to access the server from outside the firewall, I set up a dyndns.org connection, but haven't got that working at all. How do I set and change the id (node number -- I used 1210 as my node number, the password is 123456, and the ip is 192.168.15.50) I have tried several times to gog in, changing the information in /etc/asterisk/rpt.conf but with no luck. How does one change the password when after to maintain security in the wild? Any help would be greatly appreciated. I am sure this is a classic case of tightening up the nut behind the keyboard, but after two days of messing with it and carefully ensuring that the build did not have any errors, I am now at a loss. Anyway I am just trying to take baby steps here first connecting the app and then secondly pushing xmit to see if the red led will light up on the URI. Thanks in advance for any help you can provide. Barry, K0BSB

1 0

Echolink conference
by SaLustiano Wong, Jr. 02 Aug '13

02 Aug '13

I was wondering if anybody know how to run an echolink conference thru that shows list of connected call signs instead of just the node numbers. I constantly hear connected immediately followed by disconnected announcement (I think because they cannot see who's logged in). I wasn't sure if I could run "the bridge" or how 2 configure it. Please advise.. thanks & 73.. SaL- W6SEL

1 0

Re: [App_rpt-users] Access Command Mode With A Macro
by Johnny Keeker 01 Aug '13

01 Aug '13

The question is, can a macro be created to connect to a node and then put it in the command mode? I've tried creating the usual macro example. [macro] 1=*325555*425555# *51 only calls the 25555 node yet it does not take into account the *425555

7 15

Re: [App_rpt-users] RTCM simple mode to voting
by Tim Sawyer 31 Jul '13

31 Jul '13

Oh, I misunderstood you. It thought by 'simple mode' you meant simpleUSB. There is no such mode as 'simple voting'. You have to have a GPS for voting. -- Tim :wq On Jul 31, 2013, at 12:06 PM, Michael Hebert <mhebert1975(a)gmail.com> wrote: > Tim, > > Thank you for the quick response. I have changed the settings and restarted asterisk. I am not sure that it is function correctly. We are using your allmon and it looks like it is still in mix mode. http://allstar.kc5daq.net/allmon/voter.php?node=28304 > > Also, this is what i am seeing when logged into asterisk using putty. > > Got rx packet, len 185 payload 1 challenge 301026669 digest 9d8b59de > mix client (Mulaw) KD5DFB_main index: 960 their seq: 6291366 our seq: 6291366 > Got rx packet, len 185 payload 1 challenge 301026669 digest 9d8b59de > mix client (Mulaw) KD5DFB_main index: 960 their seq: 6291367 our seq: 6291367 > Got rx packet, len 185 payload 1 challenge 301026669 digest 9d8b59de > mix client (Mulaw) KD5DFB_main index: 960 their seq: 6291368 our seq: 6291368 > Got rx packet, len 185 payload 1 challenge 301026669 digest 9d8b59de > mix client (Mulaw) KD5DFB_main index: 960 their seq: 6291369 our seq: 6291369 > Got rx packet, len 185 payload 1 challenge 301026669 digest 9d8b59de > mix client (Mulaw) KD5DFB_main index: 960 their seq: 6291370 our seq: 6291370 > Got rx packet, len 185 payload 1 challenge 301026669 digest 9d8b59de > mix client (Mulaw) KD5DFB_main index: 960 their seq: 6291371 our seq: 6291371 > Got rx packet, len 185 payload 1 challenge 301026669 digest 9d8b59de > mix client (Mulaw) KD5DFB_main index: 960 their seq: 6291372 our seq: 6291372 > > > On Wed, Jul 31, 2013 at 8:41 AM, Tim Sawyer <tim.sawyer(a)me.com> wrote: > Yes and yes. > -- > Tim > :wq > > On Jul 31, 2013, at 6:05 AM, Michael Hebert <mhebert1975(a)gmail.com> wrote: > >> All, >> >> I am trying to convert my system from simple mode to voting. I wanted to check to make sure that I make all the appropriate changes. >> >> Here is my setup. >> >> Main node >> Asterisk server running ACID >> Kenwood TKR-820 repeater >> RTCM >> Garmin 18x GPS LVC >> >> Voter node >> Kenwood TKR-820 repeater >> RTCM >> Garmin 18x GPS LVC >> >> I changed the voter.conf to reflect the changes >> >> [28304] >> KD5DFB_main=pass1,transmit >> KD5DFB_voter=pass2 >> thresholds=255,110-5 >> linger=6 >> >> Do i just need to add master statement to KD5DFB_main? >> >> Also, do I need to change menu 10 on the RTCM to 0? >> >> Any help please! >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

2 1

How to Configure for Private network
by Barry Berg 31 Jul '13

31 Jul '13

Before I gen a copy of the system, I want to experiment and do not want to link to Allstar. How do I set up the .iso so that I will end up with a provate network> TIA Barry, K0BSB

2 1

RTCM simple mode to voting
by Michael Hebert 31 Jul '13

31 Jul '13

All, I am trying to convert my system from simple mode to voting. I wanted to check to make sure that I make all the appropriate changes. Here is my setup. Main node Asterisk server running ACID Kenwood TKR-820 repeater RTCM Garmin 18x GPS LVC Voter node Kenwood TKR-820 repeater RTCM Garmin 18x GPS LVC I changed the voter.conf to reflect the changes [28304] KD5DFB_main=pass1,transmit KD5DFB_voter=pass2 thresholds=255,110-5 linger=6 Do i just need to add master statement to KD5DFB_main? Also, do I need to change menu 10 on the RTCM to 0? Any help please!

2 1

Re: [App_rpt-users] Voter RTCM TX buffer hardware limitation?
by Harshad Rangarajan 31 Jul '13

31 Jul '13

As of now I am still looking for any people to tell me if lowering the minimum TX buffer RTCM will allow is possible at all. My system is so close to having the low latency I need, I just need a tiny less! I know that there are MANY others who would love to see RTCM voting capability to be this fast, and the current capabilities are very close! I look forward to any response about this. -Harshad P.S. Thank you Jim and Tim! ----- Original Message ----- From: Harshad Rangarajan Sent: 07/28/13 07:09 PM To: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Voter RTCM TX buffer hardware limitation? Jim, I do not expect zero latency. I understand that DSP has latency no matter what. I do not expect zero latency from the system, I am just curious if there is any way to lower the minimum TX buffer in the RTCM below 800. At 800, the latency is very, very close to acceptable for my use. We currently have a hilltop UHF repeater that is linked via 420MHZ to other VHF repeater in next county. People often talk full-duplex between the two, so they are listen to the repeater output while they talk. This is also very common amongst other local linked systems. If someone else talk at the same time on the VHF, their voices mix like a conference call. This has proved to be very useful to everyone. You ask what repeater we use? UHF repeater is TKR-850 and VHF repeater is a Micor base.

2 1

DTMF Variables
by Robert Garcia 31 Jul '13

31 Jul '13

All, Is it possible to pass a variable via DTMF to a macro? Let me explain my goal.. Private Node <-> Public Hub I would like a user on the private node to be able to link or unlink the hub node without having to go through the *4 remote command process to do it. In practice, I would like to use a macro like *5329728 from the Private Node and have the Public Hub connect to node 29728, is this possible? Robert N5QM

4 4