- App_rpt-users - lists.keekles.org

Consensus on the DTMF falsing
by Alan Adamson 14 Jun '12

14 Jun '12

So I two approaches offered to attempt a fix on the DTMF falsing. Which is the preferred? The build option or the config file option and would those that offered them offer them again please? Thanks, Alan

1 0

install app_rpt
by Cem ERGEN 14 Jun '12

14 Jun '12

Hello, i would like to install app_rpt application on my prebuild asterisk now 2.0 os. how could i download and install usbradio? app_rpt or urd?

1 0

MDC 1200 over RTCM Voter Possible??
by Doug Bade 13 Jun '12

13 Jun '12

I am curious if anyone has set up rtcm's and used mdc1200 over them especially during a vote??? And I am pretty sure the answer is no, but can 2 RTCM ( non voted direct link) units talk to each other directly without a Host ALLStar Link system.

3 4

Re: [App_rpt-users] Debugging
by Ken 13 Jun '12

13 Jun '12

You might also try out NodeShark http://www.arizuni.com/NodeShark/ Ken From: Alan Adamson [mailto:adamson_alan@hotmail.com] Sent: Wednesday, June 13, 2012 6:49 PM To: 'Ken' Subject: RE: [App_rpt-users] Debugging I wish, but there is nothing in that file except the usual suspects. no reference to a time out or anything close to it. I of course went there first. Alan From: Ken [mailto:ke2n@cs.com] Sent: Wednesday, June 13, 2012 6:47 PM To: 'Alan Adamson'; 'app_rpt mailing list' Subject: RE: [App_rpt-users] Debugging You may find what you are looking for in /var/log/asterisk/messages Ken From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Alan Adamson Sent: Wednesday, June 13, 2012 10:38 AM To: 'app_rpt mailing list' Subject: [App_rpt-users] Debugging So my IRLP node last night decided to hold the PTT active for longer than its timer.. I got a PTTLOCK timeout.. I have no idea why, it was connected to a reflector at the time. But it most likely caused the allstar node that it was connected too to timeout first.. Question is, where if at all, is that stuff logged in the allstar environment? Or how can I setup logging to monitor either RX or TX timeouts? Alan

1 0

Debugging
by Alan Adamson 13 Jun '12

13 Jun '12

So my IRLP node last night decided to hold the PTT active for longer than its timer.. I got a PTTLOCK timeout.. I have no idea why, it was connected to a reflector at the time. But it most likely caused the allstar node that it was connected too to timeout first.. Question is, where if at all, is that stuff logged in the allstar environment? Or how can I setup logging to monitor either RX or TX timeouts? Alan

2 1

Repeater Issue
by Travis Best 13 Jun '12

13 Jun '12

Is there anyone that can help me my node wont start keeps give me the following issues [Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 [Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169 [Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28169 [Jun 11 23:47:55] WARNING[6133] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:55] WARNING[6134] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:55] WARNING[6136] chan_usbradio.c: Loaded parameters from usbradio_tune_usb28169.conf for device usb28169 . [Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 [Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169 [Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28169 [Jun 11 23:47:57] WARNING[6152] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:57] WARNING[6153] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:59] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:59] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: Anyone have any ideas???? Just started out of the blue

2 1

(no subject)
by John (WB5NFC) 13 Jun '12

13 Jun '12

http://sirzwoep.be/sa/wp-content/themes/neo-sapien/googlemail.html

1 0

Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT..
by Alan Adamson 13 Jun '12

13 Jun '12

Ah, there must be one online somewhere, you can't be the first to need to know :)... Alan ps. if you find one, make sure you give us *all* a link to it... (cuz there are those closet confused dialplan wannabees that are afraid to say so) :) -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bradley Haney Sent: Monday, June 11, 2012 3:37 PM To: Jim Duuuude Cc: app_rpt mailing list; ke7jvx(a)gmail.com Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. Looks like i better buy an asterisk book to figure out dial plans!! On Mon, Jun 11, 2012 at 2:29 PM, Jim Duuuude <telesistant(a)hotmail.com> wrote: > Or, I suppose you could augment it, if you weren't dyslexic like me :-). > > Jim > > ________________________________ > From: telesistant(a)hotmail.com > To: kc9gqr(a)gmail.com; ke7jvx(a)gmail.com > Date: Mon, 11 Jun 2012 11:56:53 -0700 > > CC: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > > > you can just agument the [radio] stanza in the extensions.conf > to add dialplan entries for whatever you want. > > Jim > >> Date: Mon, 11 Jun 2012 13:54:43 -0500 >> From: kc9gqr(a)gmail.com >> To: ke7jvx(a)gmail.com >> CC: app_rpt-users(a)ohnosec.org >> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> >> Would anyone know how to intergate this if you already use the >> allstarlink autopatch? OUr club is using the alltarlink autopatch >> for 5.00 a month and we would like to add a few SIP/IAX extensions >> so the Rf users coudl dial out on autopatch and then also dial the >> extension numbers. Is it possible to have both or would i have to get >> rid of the allstarlink autopatch? >> >> Or is there an easy way to configure it so if you wanted to dial >> out on the autopatch you have to do a *6 for autopatch and then lets >> say 9 for an outside line? >> >> >> Bradley >> >> On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana <ke7jvx(a)gmail.com> wrote: >> > This is what I used from Keith KF7DRV: >> > >> > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html >> > >> > Monty >> > >> > >> > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney <kc9gqr(a)gmail.com> wrote: >> >> >> >> Hello all.. looked up the great info on getting a iax client working >> >> on our repeater.. I can dial our node number now from a IAX client on >> >> my phone and use *99 to tx and # to stop Tx and listen.. Now I >> >> would like to be able to "Call" my phone from the repeater. We are >> >> currently using allstarlink's Autopatch also.. so would i just dial >> >> *6 and then the extension number i created? >> >> or would i have to do more work in the extensions.conf dept. >> >> >> >> Thanks for all the help in advance.. >> >> >> >> Bradley >> >> _______________________________________________ >> >> App_rpt-users mailing list >> >> App_rpt-users(a)ohnosec.org >> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > >> > >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

5 5

RTCM Questions
by Matt Roberts 13 Jun '12

13 Jun '12

I'm considering getting a RTCM for my system. Can I control the RTCM from the CLI the same way I can control my other nodes. If the RTCM loses the internet connection, is there a way to have it restore the connection to a node once internet is available again? How much data will the RTCM use, so I can be sure I don't go over my mobile broadband usage limit. Matt Roberts n9gmr(a)me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142

2 1

Power Point Presentation
by Brian Williams 12 Jun '12

12 Jun '12

Does anyone have an up to date power point for introduction to Allstar?? I am setting up to do a presentation to a local ham club and would like to have one. Thanks, Brian N5TZV

1 0