- App_rpt-users - lists.keekles.org

Problem with node connections
by Matt Beasant 17 Apr '11

17 Apr '11

Hi, Recently, one of my nodes has started playing up for no apparent reason! All of a sudden, when an incoming connection comes along, Asterisk quits and gives the following message: channel.c:1258 ast_channel_free: PBX may not have been terminated properly on 'IAX2xx.xx.xx.xx Outgoing calls to the same node seem fine but incoming still causes this problem! Can anyone point me in the right direction please as a Google search didnt turn up any helpful answers! Many thanks, Matt G4RKY

1 0

Announcing the Level One Expansion (LOX) Board
by David Kramer 11 Apr '11

11 Apr '11

Hi All, As many of you know Jim Dixon WB6NIL and Dale Weber N7PKT have been working on the Pico Node project www.piconode.org <http://www.piconode.org/> aka PickleJar Research. This allows a very small low cost system based on the BeagleBoard-xM single board computer to operate two radios either simplex or full-duplex. We are currently in production building the LOX Board. This board is designed to mount directly beneath the BeagleBoard-xM and provides a bunch of neat features including audio processing, standard controls for CTCSS, COR, PTT, general purpose I/Os and a wide input range switching regulator. For more information about the LOX Board please see the data sheet: http://www.dmkeng.com/images/LOX%20Board%20Data%20Sheet.pdf and the schematic: http://www.dmkeng.com/images/9094_revA.pdf . The LOX Board will begin shipping by April 22, 2011 and is offered at $149.95 each. For licensed amateur radio operators we are offering for a limited time a $50 discount so your price is just $99.95. You can place an order on our web site www.dmkeng.com <http://www.dmkeng.com/> today. Thank you to Jim and Dale for all their hard work on this project. Please contact me if you have any questions. David Kramer DMK Engineering Inc. 310-544-1222

1 0

500 server error getting nodes rc.updatenodelist
by Don Russell 11 Apr '11

11 Apr '11

getting 500 server errors on both nodes1 and nodes2 no response fom nodes 3 nodes 4 no dns at all Can ping nodes1 can't ping nodes 2-3 Just FYI. Can anybody else confirm? -- Don Russell, CBRE CBNT W9DRR - ARRL OES, Technical Specialist http://www.socialengineer.us

3 3

Re: [App_rpt-users] Parallel printer port output pins?
by K&R Yoksh 11 Apr '11

11 Apr '11

Hello Chuck, I have had great luck with the parallel port under app_rpt. First thing to try is: (Make sure Asterisk is controlling the parallel port!) # lsof /dev/parport0 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME asterisk 25664 root 24u CHR 99,0 1010 /dev/parport0 Next, make sure parallel port pins 18-25 are grounded. Some ports are quite picky about this. Here is my usbradio.conf template for using an IRLP/PLRI board: [usb1234] rxchannel=usb1234 ; pp3 = ptt ; Parallel port settings pp11 = cor pp4=out0 ; in, cor or ctcss pp5=out0 ; multiple pins can be set to PTT if desired pp6=out0 ; pins 4,5,6 are AUX 1,2,3, default off ; hdwtype=0 rxboost=1 txboost=0 rxctcssrelax=1 txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 carrierfrom=ppinvert ctcssfrom=no rxdemod=speaker txprelim=no txlimonly=no txtoctype=no txmixa=voice txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=0 Next, here's a little script to control parallel pins from a prompt: #!/bin/bash # Script to control PLRI Aux ports from prompt # by Kyle Yoksh January 2011 # # Usage: pport [node no] [parallel port pin] [logic state] # # Example, pport 2211 2 1 turns pp pin 2 on # asterisk -r -x "rpt cmd $1 cop 61,PP$2"="$3 0" One last thought, I've noticed that app_rpt will not reliably control the parallel port if you have a node configured in rpt.conf for "rxchannel=Radio/usbxxxx" without a fob present. 73 for now. Good luck. Kyle K0KN --- Original Message --- I am trying to use the parallel printer port output pins on an Intel ATOM D510MO mother board. I have included below my usbradio.conf file. For testing there is a board with LED's attached to the port and on POST it displays various patterns then nothing until fully booted when it shows only pin 4 active. I have tried this with the pport commented out and with the pbase commented out and the same result. I have tried each of the options available in the BIOS setup for the parallel port and same result. The only lines found in the log files that seem to relate to the parport are the following... Apr 10 13:26:10 server8 kernel: parport: PnPBIOS parport detected. Apr 10 13:26:10 server8 kernel: parport0: PC-style at 0x378, irq 7 [PCSPP] Apr 10 13:26:10 server8 kernel: lp0: using parport0 (interrupt-driven). Apr 10 13:26:12 server8 asterisk[2548]: VERBOSE[2548]: -- Parallel port is /dev/parport0 Does anyone have any suggestions as to how I can troubleshoot this or what might be the problem? Chuck - - - - - cut here - - - - - ; Usbradio channel driver Configuration File [general] ; General config options that apply to entire channel driver. pport=/dev/parport0 ; Specify parport device (optional) pbase=0x378 ; Specify printer port I/O address (if not using parport driver) (optional) [usb27722] ; set default output pin states pp2=out0 ; 1 to select low power, 0 to select high power transmit pp3=out1 ; 1 to enable aux input on repeater pp4=out0 ; 1 to disable repeater transmitter pp5=out1 ; 1 to select AC operation 0 to select battery test operation pp6=out0 ; 1 to enable space heater pp7=out0 ; 1 to light yellow test LED pp8=out1 ; 1 to light red test LED pp9=out1 ; 1 to light green test LED ; hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=103.5 rxctcssfreqs=103.5 txctcssfreqs=103.5 ;rxctcssoverride=0 carrierfrom=dsp ctcssfrom=dsp rxdemod=flat txprelim=yes txlimonly=no txtoctype=no txmixa=composite txmixb=voice invertptt=0 duplex=1 rxondelay=0 rxnoisefiltype=0 eeprom=0

2 1

Parallel printer port output pins?
by Chuck Henderson 10 Apr '11

10 Apr '11

I am trying to use the parallel printer port output pins on an Intel ATOM D510MO mother board. I have included below my usbradio.conf file. For testing there is a board with LED's attached to the port and on POST it displays various patterns then nothing until fully booted when it shows only pin 4 active. I have tried this with the pport commented out and with the pbase commented out and the same result. I have tried each of the options available in the BIOS setup for the parallel port and same result. The only lines found in the log files that seem to relate to the parport are the following... Apr 10 13:26:10 server8 kernel: parport: PnPBIOS parport detected. Apr 10 13:26:10 server8 kernel: parport0: PC-style at 0x378, irq 7 [PCSPP] Apr 10 13:26:10 server8 kernel: lp0: using parport0 (interrupt-driven). Apr 10 13:26:12 server8 asterisk[2548]: VERBOSE[2548]: -- Parallel port is /dev/parport0 Does anyone have any suggestions as to how I can troubleshoot this or what might be the problem? Chuck - - - - - cut here - - - - - ; Usbradio channel driver Configuration File [general] ; General config options that apply to entire channel driver. pport=/dev/parport0 ; Specify parport device (optional) pbase=0x378 ; Specify printer port I/O address (if not using parport driver) (optional) [usb27722] ; set default output pin states pp2=out0 ; 1 to select low power, 0 to select high power transmit pp3=out1 ; 1 to enable aux input on repeater pp4=out0 ; 1 to disable repeater transmitter pp5=out1 ; 1 to select AC operation 0 to select battery test operation pp6=out0 ; 1 to enable space heater pp7=out0 ; 1 to light yellow test LED pp8=out1 ; 1 to light red test LED pp9=out1 ; 1 to light green test LED ; hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=103.5 rxctcssfreqs=103.5 txctcssfreqs=103.5 ;rxctcssoverride=0 carrierfrom=dsp ctcssfrom=dsp rxdemod=flat txprelim=yes txlimonly=no txtoctype=no txmixa=composite txmixb=voice invertptt=0 duplex=1 rxondelay=0 rxnoisefiltype=0 eeprom=0

1 0

copying files between asterisk boxes under program control
by Ken 10 Apr '11

10 Apr '11

Can some guru help me out with a command line instruction that will copy a file from one box to another, in a standard ACID installation? The boxes are behind a common router and have different port numbers for SSH (of course). If any config files changes are required, please show what is needed. Secondly If possible, is there a way to direct the output of this transfer to "stdin" so that it can go directly into another program? Thanks Ken

4 10

Re: [App_rpt-users] 2 systems on one LAN, each with an Echolink number
by K&R Yoksh 10 Apr '11

10 Apr '11

I'll second Jon's advice... Another possibility not yet mentioned is to operate a private Proxy server at another location, and configure your second box to use the proxy for Echolink... I did just that back in about 2006 , although not using App-rpt.. It was all we could do at the time, so it was 100% better than nothing.. However, that brings you up to 3 PCs to operate 2 nodes... Lastly, you could try what I'm doing here.. At my QTH, I operate several Allstar nodes, and my solution was to connect the Echolink node to a hub node (2210). Through experimention, I found that outbound Echolink calls seem to work fine from any node, even when the RF nodes are not connected to the hub node. I'm not sure if that feature was ever planned, but it seems to work! I normally do not connect the RF nodes to the hub node. Nodes 2210-2213 are all running on a single P3/866 MHZ PC. If I am expecting an inbound Echolink call (almost never), we can connect any or all of the RF nodes to the hub node. 73 for now. Kyle K0KN Allstar 2210-2215 --- Original Message --- Based on that info, what you could do is set up 2 Allstar nodes on one box and setup one echolink node. Connect each node to repeater. That way its the same as having 2 boxes (actually simpler) and both nodes can access the echolink. Jon VA3RQ On 4/9/2011 7:18 AM, Jim Duuuude wrote: > Well, an installation of Echolink running on 2 nodes behind the same > IP address > can only be found with the Easter Bunny, Santa Claus, all the left > socks that were > ever lost in the laundry and competent, reliable drummers. > > In other words, it doesn't exist. The design of their protocol simply > DOES NOT > allow for such a thing. In their world, it's a unique mapping of one > node to one > IP address at a fixed port number set ONLY. That's it. Over and out. > > JIM WB6NIL > > > ------------------------------------------------------------------------ > From: rpt2(a)chuck.midlandsnetworking.com > Date: Sat, 9 Apr 2011 04:40:02 -0500 > To: app_rpt-users(a)ohnosec.org > Subject: [App_rpt-users] 2 systems on one LAN, each with an echolink > number? > > I have 2 AllStarLink systems on one LAN. Each is for a separate > repeater system with a separate computer. They share a common > Internet address. > For AllStar they work fine. For EchoLink I can only make one or the > other of them work, but not both. > > Is there a way to change the port number of one of the echolink nodes > so that they can both use the same Internet address? > We want them both to be able to have inbound and outbound connections > via echolink, independent of each other. > > Chuck

5 7

LimyLinux on a SD Card
by David KE6UPI 09 Apr '11

09 Apr '11

Has anyone used a SD card to load LimyLinux? David

1 0

2 systems on one LAN, each with an echolink number?
by Chuck Henderson 09 Apr '11

09 Apr '11

I have 2 AllStarLink systems on one LAN. Each is for a separate repeater system with a separate computer. They share a common Internet address. For AllStar they work fine. For EchoLink I can only make one or the other of them work, but not both. Is there a way to change the port number of one of the echolink nodes so that they can both use the same Internet address? We want them both to be able to have inbound and outbound connections via echolink, independent of each other. Chuck

3 2

needed: radios for VOTER system testing
by Jim Duuuude 08 Apr '11

08 Apr '11

I am planning on doing some testing of the VOTER system here in my local area and have chosen the Madera Country Sheriff's main channel as the source of radio signals (156.240 MHz, 5Khz dev). I need to find a source of 5 or 6 Maxtrac or Radius type radios that have 16 pin connectors (so that I can get discriminator audio out of them). I dont even need them permanently, just long enough to do this testing. It would even be okay of they have non-functional transmitters, since there will be no transmitting done related to this testing (I am just testing the receiver voting stuff). Does anyone have such equipment available for this purpose? Thanks. JIM WB6NIL

1 0